| realcr |
09-18-2005 01:57 PM |
slackware and cd recorder
I am running a slackware 10.1 dist and having trouble using my cd recorder. k3b doesn't seem to see any cd recording device , and cdrecord gives this output:
bash-3.00# cdrecord -scanbus
Cdrecord 1.8.1a03 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
I have no idea what went wrong as it worked very well with fc4 , ubuntu and all the windows os I tried.
I included the dmesg output as ppl always ask me to do that...
tnx for help,
realcr.
Code:
Linux version 2.4.29 (root@midas) (gcc version 3.3.4) #6 Thu Jan 20 16:30:37 PST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=307
Initializing CPU#0
Detected 1500.096 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2994.99 BogoMIPS
Memory: 515348k/524224k available (1831k kernel code, 8488k reserved, 607k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3074] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xda000000, mapped to 0xe080d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:0393
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120026A, ATA DISK drive
blk: queue c03ad460, I/O limit 4095Mb (mask 0xffffffff)
hdc: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
hdc: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1740.400 MB/sec
32regs : 1072.800 MB/sec
pIII_sse : 1945.200 MB/sec
pII_mmx : 1745.600 MB/sec
p5_mmx : 1706.800 MB/sec
raid5: using function: pIII_sse (1945.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 1004020k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Unsupported Via chipset (device id: 3128), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
NTFS driver v1.1.22 [Flags: R/O MODULE]
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xc800, 00:07:95:0a:2f:09, IRQ 11.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Setting latency timer of device 00:11.5 to 64
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xcc00, IRQ 5
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 at 0xe0b05f00, 00:c1:26:11:4d:a2, IRQ 10
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hub.c: new USB device 00:11.2-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hub.c: new USB device 00:11.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x924/0x3d52) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hub.c: new USB device 00:11.2-1.2, assigned address 4
usb.c: USB device 4 (vend/prod 0xc45/0x600d) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0924 pid 0x3D52
printer.c: v0.13: USB Printer Device Class driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
cdrom: open failed.
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
|
