Linux - HardwareThis forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
recently obtain an extra monitor and video card. so i install the video card and its works but only get a display on the monitor connect to the video card and not the one connected to the tower. when i unistall the card then i get a display on the monitor connect to the tower. i want both monitor to give a display. i also install the drive with with synapatic package manager.
the video card i have is this
this is the video card 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
i want to use the one on the monitor and the one on the video card...but it only uses the video card...if i take it out then it uses the one on the motherboard?why does the one on the motherboard get disabled when i insert the card and uses the card.
This is just an example, because I don't have enough info to suggest anything more. So basically you need one section per device and thus per monitor as well.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
this is whati have under X11
desktop:/etc/X11$ ls
app-defaults X xorg.conf.bak Xsession.d
cursors xinit xorg.conf.failsafe Xsession.options
default-display-manager xkb Xresources XvMCConfig
fonts xorg.conf Xsession Xwrapper.config
when the video card is not install i type:
desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
when i install the video card i get this
desktop:~$ lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
why dont the 2 show up? its like the video cards diabled the mobo one automatically
You're right that is somewhat unusual. Maybe check your BIOS settings, see if there's anything in there about the onboard video card, make sure it stays enabled.
Definitely, check the BIOS configuration, and try to update it if you can't find anything relevant.
Also, check the mother board documentation.
Note that lspci should show both cards even if no driver can be found which matches the hardware. It just look up for pci IDs and search for descriptions for those IDs on a database which is usually stored in a plain text file. Usually at /usr/share/misc/pci.ids or a similar location. The fact that it can't see the ID for the card means that it's disabled by the BIOS or some other hardware-based system that's external to your OS.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.