scanner setup problem
 

I am kinda new to the area. i want to setup my scanner, and i found a tutorial:
http://www.zianet.com/k5di/usb/usb-scanner.txt
the problem is that i cannot identify which one is my scanner, here is the output:
debian:~# cat /proc/bus/usb/devices

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.5 uhci_hcd
S: Product=VIA Technologies, Inc. USB (#3)
S: SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=08b0 Rev= 0.02
S: SerialNumber=01401900A5000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 196 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 292 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
I: If#= 0 Alt= 4 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 592 Ivl=1ms
I: If#= 0 Alt= 5 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 704 Ivl=1ms
I: If#= 0 Alt= 6 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 776 Ivl=1ms
I: If#= 0 Alt= 7 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 840 Ivl=1ms
I: If#= 0 Alt= 8 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 896 Ivl=1ms
I: If#= 0 Alt= 9 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms
I: If#= 0 Alt=10 #EPs= 2 Cls=0a(data ) Sub=ff Prot=00 Driver=Philips webcam
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
E: Ad=85(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=84(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=84(I) Atr=01(Isoc) MxPS= 90 Ivl=1ms
I: If#= 2 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=84(I) Atr=01(Isoc) MxPS= 46 Ivl=1ms
I: If#= 2 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=84(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 2 Alt= 4 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=84(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms

T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=059b ProdID=0033 Rev= 2.00
S: Manufacturer=Iomega
S: Product=USB Zip 100
S: SerialNumber=003347D8B68C2524
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=498mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.5 uhci_hcd
S: Product=VIA Technologies, Inc. USB (#2)
S: SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=05d8 ProdID=4002 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.5 uhci_hcd
S: Product=VIA Technologies, Inc. USB
S: SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
debian:~#


my scanner is a usb "Mustek 1200 UB PLUS". I downloaded the "sbfw.usb" file from sane, but i do not know how and where to install. Please somebody help me.