LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
LinkBack Search this Thread
Old 12-07-2004, 02:20 PM   #1
legolin
Member
 
Registered: Dec 2003
Location: munich
Distribution: Fedora Core 4
Posts: 141

Rep: Reputation: 15
saa7134 cinergy 600 TV radio - terratec


hi people. i have buy a new tv card (cinergy 600 TV radio - terratec) which uses the module saa7134

i have FC3 with kernel 2.6.9.something

the output of lspci is:

01:07.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)

so that the card is recognized.

the modules are loaded, so the output from
lsmod | grep saa7134


saa7134 94869 0
video_buf 21701 1 saa7134
v4l2_common 5953 1 saa7134
v4l1_compat 11973 1 saa7134
i2c_core 22081 1 saa7134
ir_common 4677 1 saa7134
videodev 9664 1 saa7134
soundcore 9889 2 saa7134,snd

if i run
xawtv -hwscan
the output is:

[root@delucca ~]# xawtv -hwscan
This is xawtv-3.94, running on Linux/i686 (2.6.9-1.667)
looking for available devices
port 61-61
type : Xvideo, image scaler
name : NV Video Overlay

port 62-93
type : Xvideo, image scaler
name : NV Video Blitter

/dev/video0: OK [ -device /dev/video0 ]
type : v4l2
name : UNKNOWN/GENERIC
flags: overlay capture tuner



is this here ok? is my tv card running on /dev/video0 ??????

my problem is, while running xawtv and tvtime that i don't have video or audio. it just dont play anithing... do i have to configure something else in modprobe.conf or something else?


thankx a lot!!!!!!


the output from tvtime verbose:
$ sudo tvtime -v -d /dev/video0
Running tvtime 0.9.15.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/leg/.tvtime/tvtime.xml
cpuinfo: CPU AMD Athlon(tm) XP 1800+, family 6, model 6, stepping 2.
cpuinfo: CPU measured at 1536.843MHz.
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 60801000
xfullscreen: Single-head detected, pixel aspect will be calculated.
xfullscreen: Pixel aspect ratio on the primary head is: 1368/1355 == 1.01.
xfullscreen: Using the XFree86-VidModeExtension to calculate fullscreen size.
xfullscreen: Fullscreen to 0,0 with size 1280x1024.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1368:1355.
xcommon: Pixel aspect ratio 1368:1355.
xcommon: Window manager is KWin and is EWMH compliant.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1368:1355.
xcommon: Displaying in a 761x576 window inside 761x576 space.
xvoutput: Using XVIDEO adaptor 61: NV Video Overlay.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/leg/.tvtime/stationlist.xml
videoinput: Using video4linux2 driver 'saa7134', card 'UNKNOWN/GENERIC' (bus PCI:0000:01:07.0).
videoinput: Version is 524, capabilities 5010015.
videoinput: Maximum input width: 720 pixels.
tvtime: Sampling input at 720 pixels per scanline.
xcommon: Pixel aspect ratio 1368:1355.
xcommon: Displaying in a 761x576 window inside 761x576 space.
xcommon: Received a map, marking window as visible (63).
xcommon: Window fully obscured, marking window as hidden (63).
xcommon: Window made visible, marking window as visible (63).
 
Old 12-08-2004, 03:08 AM   #2
theYinYeti
Senior Member
 
Registered: Jul 2004
Location: France
Distribution: Arch Linux
Posts: 1,897

Rep: Reputation: 61
I think you should specify "saa7134 card=..." in your modprobe.conf file (or modules.conf for kernel2.4).

Yves.
 
Old 12-09-2004, 07:42 AM   #3
legolin
Member
 
Registered: Dec 2003
Location: munich
Distribution: Fedora Core 4
Posts: 141

Original Poster
Rep: Reputation: 15
hi Yves,


thanx for you reply, but i don't understand realy what you mean.

is this right?:
add a line in modprobe.conf (i use 2.6.9 kernel) like this:
saa7134 card=/dev/video0

thankx a lot!!!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Terratec Cinergy 600 tv -> how can I make infrared work? chaosd Linux - Hardware 0 11-24-2005 06:33 AM
DVB-T Cinergy 1200 Terratec & SUSE 9.2 kapa Linux - Hardware 1 03-16-2005 01:05 PM
Terratec Cinergy 1200 DVB-T and SUSE kapa Linux - Hardware 0 03-03-2005 04:52 PM
X-Net Radio! Internet Radio with an attitude! xnetradio General 1 01-11-2004 11:01 AM
No Sound from Terratec Synergy 600 nik_c Linux - Hardware 0 12-01-2003 03:58 AM


All times are GMT -5. The time now is 01:48 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration