hi all,

here is the small office with a P4 as the network file server.

my network drive is failed and all the user cannot access thier home directory cause the home directory is software raid 1 both SATA harddisk

then i check the log file i found the error log from SMART as below
##### smart log ###########
Dec 5 16:36:32 mvy-skyline smartd[3389]: Device: /dev/sdb, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 117 to 110
Dec 5 16:36:32 mvy-skyline smartd[3389]: Device: /dev/sdb, SMART Usage Attribute: 190 Temperature_Celsius changed from 59 to 58
Dec 5 16:36:32 mvy-skyline smartd[3389]: Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius changed from 41 to 42
Dec 5 1
############# end of smart log

then i open the case and i used my hand to touch the both sata drive. it is not HOT at all.

so, i suspect not the problem from temperature.

anyone have such experience ??
please help

thanks 1st

This means the drive is about to fail. Indeed it did. Replace it.

wrong..
the correct answered is the smbd services down
!@#$!@#$@!#$@!

stupid enough.. cannot put all the trust on SMART

...or the daemon's not running...
don't worry, I didn't think of checking either.
this sort of thing is why helpdesk techs start with "have you switched the computer on?"