rt2500 problems in Sabayon
Ok, i installed Sabayon Linux yesterday. I use the ralink 2500 model network card. I ran the config app to configure my rt2500 driver from kmenu. my network card makes a connection to my router, but doesnt connect to the internet. Can anybody help me with this problem?
|
Run 'ifconfig eth0' assuming that this is your only nic.
If it puts something like that out your config from the OS side is ok. eth0 Link encap:Ethernet HWaddr 00:13:D4:68:F5:81 * inet addr:10.1.1.4 Bcast:10.255.255.255 Mask:255.0.0.0 * UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:366212 errors:0 dropped:0 overruns:0 frame:0 TX packets:206157 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:518728880 (494.6 MiB) TX bytes:16554529 (15.7 MiB) Interrupt:7 Base address:0x4000 * This is the important part * I am not sure how this works with sabayon but I wouldn't trust kmenu to setup my nic with gentoo. Try dhcpcd eth0 and see where that leaves you. |
All times are GMT -5. The time now is 06:28 PM. |