LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices



Reply
 
Search this Thread
Old 05-17-2004, 11:27 AM   #1
jamaso
Member
 
Registered: Oct 2001
Location: brasil
Distribution: mdrk 8.0,redht7.1,debianpotato
Posts: 615

Rep: Reputation: 30
problems with modem initialization process


Hi people

My question is what is regarding a linmodem that responds well under query (kppp) process :

-query modem
-modem ready
-ATI query
-ATI1,2,3,4,5,6,7

and when you try to conect it stucks after the initialization setp (expecting :OK)

I think i might give some tips about the modem itself :


when i run lspci -vv, i get :


--------------------------------------------------------------------------------------
Acer Laboratories Inc. [ALi]: Unknown device 5457 (prog-if 00 [Ge neric])
Subsystem: Hewlett-Packard Company: Unknown device 0850
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1400 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot +,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

_________________________________________________________________________________________

Windows says that its a conexant modem, but i have found out there are several versions of the same computer(HP nx9010) well i tried several times to install the drivers from conexant (there are two) but had no sucess,suddenly after enabling a compatible sound card module (trident)
my modem is being set correctly by kppp as stated before. I think that these devices are linked in some way (probably i am talking nonsense but they are onboard devices and under windows there is numerous sound devices related to my modem). Can you help ? Why does a modem stuck on initilization process ? Thanks for any reply !
 
Old 05-17-2004, 12:34 PM   #2
jamaso
Member
 
Registered: Oct 2001
Location: brasil
Distribution: mdrk 8.0,redht7.1,debianpotato
Posts: 615

Original Poster
Rep: Reputation: 30
I just looked into linuxant site and found this :

"To identify your modem chipset, you can try the Conexant List Modem
Tool below, scanModem (a modem detection script by Marv Stodolsky)
or Linux command-line utilities (such as "/sbin/lspci", "/sbin/lspci
-nv", or "cat /proc/pci") to list the devices present on your system.
BEWARE: some PCI IDs, notably 127A:1025 and :2005 were used for both HCF and HSF modems, so you might have to try both drivers to find out which one works.
If you have a RipTide HCF modem (127A:4321 or 127A:4331), you need
to install both the RIPTIDE and HCF drivers, otherwise the modem
will not work. RipTide HSF modems (127A:4311 or 14F1:4311) require
only the HSF driver, on top of which the RIPTIDE driver can be
optionally installed to add audio, synth, midi, and gameport
functionality.
If you have an ordinary (non-RipTide) HCF or HSF modem, you do not need the RIPTIDE driver."

---------------------------------------------------------------------------------------------
well, before i installed the trident module i would get :

root@darkstar:~# lsmod

Module Size Used by Not tainted
soundcore 3332 0 (autoclean)
ds 6568 1
yenta_socket 9632 1
pcmcia_core 38112 0 [ds yenta_socket]
ide-scsi 8048 0


and now :

root@darkstar:~# lsmod
Module Size Used by Not tainted
ds 6568 1
yenta_socket 9632 1
pcmcia_core 38112 0 [ds yenta_socket]
ide-scsi 8048 0
trident 27636 1
ac97_codec 9512 0 [trident]
soundcore 3332 2 [trident]
pcigame 1576 0 [trident]
gameport 1452 0 [pcigame]


i just thought this might help someway !
 
Old 05-17-2004, 04:15 PM   #3
jamaso
Member
 
Registered: Oct 2001
Location: brasil
Distribution: mdrk 8.0,redht7.1,debianpotato
Posts: 615

Original Poster
Rep: Reputation: 30
i just found this at a wiki "how-to install red9.0 on nx0910" :


"Use the alsa driver for this sound card (snd-ali5451) if you want
to use the sound card and the modem at the same time. The trident module can
even hangs the notebook while playing audio and accessing the Internet using the
modem. This happens probably because the sound and modem are the same chip and
the trident module conflicts with the modem driver. "
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems killing process Artik Debian 6 05-03-2005 11:29 AM
speedtouch modem initialization speed-up ttilt Linux - Networking 1 12-20-2004 04:35 PM
messagebus process problems nygiants#1 Linux - General 1 04-27-2004 10:16 PM
Slow initialization with my external modem sinoue Linux - Hardware 5 03-11-2004 05:32 AM
Your modem is not responding to initialization lel800 Mandriva 14 12-04-2003 05:03 PM


All times are GMT -5. The time now is 11:42 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration