Problems with DC10Plus video capture card install
I have downloaded and installed the driver-zoran-0.9.4 drivers from sourceforge. I have the appropriate modules compiled into my kernel (I think). When I run the update script that comes with the driver, it tries to install the modules, but when it comes to installing the zoran.o module, I get:
ROOT: 15:57 [jupiter] <268>% ./update dc10plus NTSC
./zoran.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Drivers for ' dc10plus' with norm 'NTSC' loaded
Running dmesg gives:
i2c-core.o: driver unregistered: adv7175
i2c-core.o: driver unregistered: saa7110
i2c-core.o: driver unregistered: vpx3220
i2c-algo-bit.o: i2c bit algorithm module
Linux video codec intermediate layer: v0.2
i2c-core.o: driver saa7110 registered.
i2c-core.o: driver adv7175 registered.
Zoran MJPEG board driver version 0.9.4
No known MJPEG cards found.
Looking in /proc/pci, I have the card listed at:
Bus 0, device 15, function 0:
Class 0404: PCI device 11de:6053 (Zoran Corporation) (rev 2).
Master Capable. Latency=32. Min Gnt=6.Max Lat=16.
Non-prefetchable 32 bit memory at 0xf7000000 [0xf7000fff].
Here are a list of the modules installed:
ROOT: 15:57 [jupiter] <270>% lsmod
Module Size Used by Tainted: PF
zr36060 9616 0 (unused)
adv7175 4988 0 (unused)
saa7110 6812 0 (unused)
videocodec 7076 1 [zr36060]
i2c-algo-bit 8776 0
zr36067 80464 0 (unused)
i2c-old 6592 0 [zr36067]
videodev 8320 0 [zr36067]
i2c-proc 9136 0 (unused)
i2c-dev 5700 0 (unused)
i2c-core 19044 0 [adv7175 saa7110 i2c-algo-bit i2c-proc i2c-dev]
emu10k1 68552 2 (autoclean)
sound 73460 0 (autoclean) [emu10k1]
parport_pc 18724 1 (autoclean)
lp 8128 0 (autoclean)
parport 36576 1 (autoclean) [parport_pc lp]
3c59x 29552 2
mousedev 5428 0 (unused)
keybdev 2880 0 (unused)
input 5696 0 [mousedev keybdev]
usb-uhci 26156 0 (unused)
usbcore 76096 1 [usb-uhci]
raid0 3848 2
Any ideas as to why the zoran driver isn't seeing my card?
BTW, I had this card working on my system some time ago, but have forgotten exactly how I got it to initialize properly.
Thanks for any help you may have.
Paul.
|