LinuxQuestions.org
View the Most Wanted LQ Wiki articles.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 05-23-2009, 11:43 AM   #1
Kahlar
LQ Newbie
 
Registered: May 2009
Posts: 1

Rep: Reputation: 0
Problem with hp laserjet 1018


Hello.
I've got a problem with the hp laserjet 1018 on ubuntu 9.04 jaunty jackalope.
I've maneged to install it and make it print correctly by uninstalling the hplip from the repositories and installing the newest version from the hplip website, but, after I
reboot the system, an error occurs when I reboot the computer.
Instead to switching to the login screen, the screen remains black and perpetually gives this error:
usb 1-7: device descriptor read/64 error-110
Then, I turn off the computer power, reboot again and this time I can login correctly.
However, now, the computer acts like the printer wasn't plugged in, and no matter where i plug it in, ubuntu refuses to detect it.

I've read that running dmesg -s 1000000 gives the necessary info to solve this, but i don't know what to do with the report, so if anyone who understands this thing can help me, I'd be very thankful....

the report:

[ 0.505904] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.505906] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.505908] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.505910] bus: 03 index 2 mmio: [0xfdd00000-0xfddfffff]
[ 0.505912] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.505913] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.505923] NET: Registered protocol family 2
[ 0.520059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.520318] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520872] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.521126] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.521129] TCP reno registered
[ 0.528079] NET: Registered protocol family 1
[ 0.528196] checking if image is initramfs... it is
[ 1.054314] Freeing initrd memory: 7369k freed
[ 1.054497] cpufreq: No nForce2 chipset.
[ 1.054612] audit: initializing netlink socket (disabled)
[ 1.054630] type=2000 audit(1243094551.052:1): initialized
[ 1.061898] highmem bounce pool size: 64 pages
[ 1.061903] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.063004] VFS: Disk quotas dquot_6.5.1
[ 1.063052] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.063579] fuse init (API version 7.10)
[ 1.063648] msgmni has been set to 1701
[ 1.063832] alg: No test for stdrng (krng)
[ 1.063843] io scheduler noop registered
[ 1.063845] io scheduler anticipatory registered
[ 1.063847] io scheduler deadline registered
[ 1.063860] io scheduler cfq registered (default)
[ 1.324050] pci 0000:01:05.0: Boot video device
[ 1.326475] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.326494] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.326511] pcieport-driver 0000:00:07.0: irq 2303 for MSI/MSI-X
[ 1.326517] pci_express 0000:00:07.0cie00: allocate port service
[ 1.326530] pci_express 0000:00:07.0cie03: allocate port service
[ 1.326573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.326581] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.326699] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.326702] ACPI: Power Button (FF) [PWRF]
[ 1.326739] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.326741] ACPI: Power Button (CM) [PWRB]
[ 1.326784] fan PNP0C0B:00: registered as cooling_device0
[ 1.326789] ACPI: Fan [FAN] (on)
[ 1.326970] processor ACPI_CPU:00: registered as cooling_device1
[ 1.326997] processor ACPI_CPU:01: registered as cooling_device2
[ 1.329130] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.329416] ACPI: Thermal Zone [THRM] (40 C)
[ 1.329457] isapnp: Scanning for PnP cards...
[ 1.683371] isapnp: No Plug & Play device found
[ 1.693193] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.693299] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.693612] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.694273] brd: module loaded
[ 1.694545] loop: module loaded
[ 1.694604] Fixed MDIO Bus: probed
[ 1.694610] PPP generic driver version 2.4.2
[ 1.694665] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.694690] Driver 'sd' needs updating - please use bus_type methods
[ 1.694698] Driver 'sr' needs updating - please use bus_type methods
[ 1.694728] ahci 0000:00:12.0: version 3.0
[ 1.694750] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.694779] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.694867] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.694870] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 1.695307] scsi0 : ahci
[ 1.695432] scsi1 : ahci
[ 1.695496] scsi2 : ahci
[ 1.695568] scsi3 : ahci
[ 1.695654] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.695657] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.695661] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.695664] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.176024] ata1: softreset failed (device not ready)
[ 2.176063] ata1: failed due to HW bug, retry pmp=0
[ 2.340028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.346949] ata1.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
[ 2.346951] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.346970] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.347716] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.347719] ata1.00: configured for UDMA/133
[ 2.680032] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.016032] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.352031] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.368120] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[ 3.368204] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.368219] sd 0:0:0:0: [sda] Write Protect is off
[ 3.368222] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.368244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.368310] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.368323] sd 0:0:0:0: [sda] Write Protect is off
[ 3.368325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.368345] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.368349] sda: sda1 sda2 < sda5 >
[ 3.390449] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.390492] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.390741] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.390872] scsi4 : pata_atiixp
[ 3.390939] scsi5 : pata_atiixp
[ 3.391433] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 3.391435] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 3.552557] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
[ 3.568505] ata5.00: configured for UDMA/66
[ 3.725462] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5
[ 3.729743] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.729746] Uniform CD-ROM driver Revision: 3.20
[ 3.729835] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.729879] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.730285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.730309] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.730329] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 3.730380] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 3.730408] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 3.730426] ehci_hcd 0000:00:13.5: debug port 1
[ 3.730452] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 3.740021] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 3.740094] usb usb1: configuration #1 chosen from 1 choice
[ 3.740119] hub 1-0:1.0: USB hub found
[ 3.740126] hub 1-0:1.0: 10 ports detected
[ 3.740233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.740246] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.740256] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.740291] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 3.740320] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 3.800046] usb usb2: configuration #1 chosen from 1 choice
[ 3.800066] hub 2-0:1.0: USB hub found
[ 3.800076] hub 2-0:1.0: 2 ports detected
[ 3.800158] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.800168] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.800206] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 3.800233] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 3.856041] usb usb3: configuration #1 chosen from 1 choice
[ 3.856062] hub 3-0:1.0: USB hub found
[ 3.856070] hub 3-0:1.0: 2 ports detected
[ 3.856147] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.856156] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 3.856191] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 3.856217] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 3.912041] usb usb4: configuration #1 chosen from 1 choice
[ 3.912065] hub 4-0:1.0: USB hub found
[ 3.912074] hub 4-0:1.0: 2 ports detected
[ 3.912144] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.912153] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 3.912190] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 3.912203] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 3.968047] usb usb5: configuration #1 chosen from 1 choice
[ 3.968067] hub 5-0:1.0: USB hub found
[ 3.968076] hub 5-0:1.0: 2 ports detected
[ 3.968146] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.968156] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 3.968193] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 3.968206] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 4.024044] usb usb6: configuration #1 chosen from 1 choice
[ 4.024065] hub 6-0:1.0: USB hub found
[ 4.024074] hub 6-0:1.0: 2 ports detected
[ 4.024152] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.024217] usbcore: registered new interface driver libusual
[ 4.024245] usbcore: registered new interface driver usbserial
[ 4.024255] USB Serial support registered for generic
[ 4.052020] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 4.204700] usb 1-7: configuration #1 chosen from 1 choice
[ 4.373015] usb 1-9: new high speed USB device using ehci_hcd and address 4
[ 4.598120] usb 1-9: configuration #1 chosen from 1 choice
[ 4.864061] usb 5-2: new low speed USB device using ohci_hcd and address 2
[ 5.034082] usb 5-2: configuration #1 chosen from 1 choice
[ 5.036161] usbcore: registered new interface driver usbserial_generic
[ 5.036163] usbserial: USB Serial Driver core
[ 5.036204] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.036534] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.036538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.036652] mice: PS/2 mouse device common for all mice
[ 5.036797] rtc_cmos 00:04: RTC can wake from S4
[ 5.036830] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.036865] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.036923] device-mapper: uevent: version 1.0.3
[ 5.037042] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.037141] device-mapper: multipath: version 1.0.5 loaded
[ 5.037143] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.037236] EISA: Probing bus 0 at eisa.0
[ 5.037255] Cannot allocate resource for EISA slot 4
[ 5.037271] EISA: Detected 0 cards.
[ 5.037338] cpuidle: using governor ladder
[ 5.037339] cpuidle: using governor menu
[ 5.037781] TCP cubic registered
[ 5.037865] NET: Registered protocol family 10
[ 5.038215] lo: Disabled Privacy Extensions
[ 5.038485] NET: Registered protocol family 17
[ 5.038499] Bluetooth: L2CAP ver 2.11
[ 5.038500] Bluetooth: L2CAP socket layer initialized
[ 5.038503] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.038505] Bluetooth: SCO socket layer initialized
[ 5.038542] Bluetooth: RFCOMM socket layer initialized
[ 5.038548] Bluetooth: RFCOMM TTY layer initialized
[ 5.038550] Bluetooth: RFCOMM ver 1.10
[ 5.038599] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 5.038650] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
[ 5.038653] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
[ 5.038655] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
[ 5.038657] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 5.038705] Using IPI No-Shortcut mode
[ 5.038772] registered taskstats version 1
[ 5.038896] Magic number: 9:380:35
[ 5.038916] bdi 7:0: hash matches
[ 5.038988] rtc_cmos 00:04: setting system clock to 2009-05-23 16:02:35 UTC (1243094555)
[ 5.038991] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.038992] EDD information not available.
[ 5.039326] Freeing unused kernel memory: 532k freed
[ 5.039464] Write protecting the kernel text: 4128k
[ 5.039511] Write protecting the kernel read-only data: 1532k
[ 5.062536] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.218859] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.218877] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.218897] r8169 0000:02:00.0: setting latency timer to 64
[ 5.219009] r8169 0000:02:00.0: irq 2302 for MSI/MSI-X
[ 5.219568] eth0: RTL8168b/8111b at 0xf7c68000, 00:1d:60:25:7f:25, XID 38000000 IRQ 2302
[ 5.247269] usbcore: registered new interface driver hiddev
[ 5.254314] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2:1.0/input/input4
[ 5.285124] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:13.3-2/input0
[ 5.285144] usbcore: registered new interface driver usbhid
[ 5.285148] usbhid: v2.6:USB HID core driver
[ 5.310541] ohci1394 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.331554] Floppy drive(s): fd0 is 1.44M
[ 5.364023] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.369767] FDC 0 is a post-1991 82077
[ 5.551072] PM: Starting manual resume from disk
[ 5.551075] PM: Resume from partition 8:5
[ 5.551077] PM: Checking hibernation image.
[ 5.551221] PM: Resume from disk failed.
[ 5.568127] kjournald starting. Commit interval 5 seconds
[ 5.568138] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.640105] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800013e85dd]
[ 10.264412] udev: starting version 141
[ 10.364737] Linux agpgart interface v0.103
[ 10.418279] parport_pc 00:0a: reported by Plug and Play ACPI
[ 10.418355] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.420590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.452304] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 10.522409] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.624420] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 10.900691] ppdev: user-space parallel port driver
[ 10.933247] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
[ 10.933267] usbcore: registered new interface driver usblp
[ 11.110897] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.197254] psmouse serio1: ID: 10 00 64<6>lp0: using parport0 (interrupt-driven).
[ 11.693657] Adding 5654840k swap on /dev/sda5. Priority:-1 extents:1 across:5654840k
[ 11.817777] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 12.560754] EXT3 FS on sda1, internal journal
[ 13.673353] type=1505 audit(1243094564.133:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2070
[ 13.722809] type=1505 audit(1243094564.181:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2074
[ 13.722943] type=1505 audit(1243094564.181:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2074
[ 13.722990] type=1505 audit(1243094564.181:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2074
[ 13.723036] type=1505 audit(1243094564.181:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2074
[ 13.862100] type=1505 audit(1243094564.321:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2079
[ 13.862290] type=1505 audit(1243094564.321:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2079
[ 13.890375] type=1505 audit(1243094564.349:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2083
[ 16.128225] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.128229] Bluetooth: BNEP filters: protocol multicast
[ 16.136604] Bridge firewalling registered
[ 16.402293] usblp0: removed
[ 16.921494] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hal_lpadmin rqt 161 rq 0 len 4096 ret -110
[ 17.292917] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.590158] [drm] Initialized drm 1.1.0 20060810
[ 17.646520] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 17.873900] [drm] Setting GART location based on new memory map
[ 17.874463] [drm] Loading RS690/RS740 Microcode
[ 17.874480] [drm] Num pipes: 1
[ 17.874486] [drm] writeback test succeeded in 1 usecs
[ 21.538982] r8169: eth0: link up
[ 21.538992] r8169: eth0: link up
[ 32.356017] eth0: no IPv6 routers present
[ 79.500042] Clocksource tsc unstable (delta = -255572860 ns)
[ 160.312512] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 187.000530] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 305.108542] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 340.744490] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 376.384433] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 412.024494] usb 1-7: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HP Laserjet 1018 and Suse 11 olva Suse/Novell 1 09-10-2008 09:59 AM
install HP laserjet 1018 with ubuntu itbod Linux - Hardware 7 04-11-2008 10:28 AM
HP laserjet problem SteveSch Debian 1 03-16-2008 05:23 PM
hp laserjet 6L problem piva.francesco Linux - Hardware 13 09-14-2005 08:57 AM
Problem in configuring HP Laserjet 1200 wuqso Linux - Hardware 4 06-08-2005 12:45 AM


All times are GMT -5. The time now is 10:10 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration