LinuxQuestions.org
Did you know LQ has a Linux Hardware Compatibility List?
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 04-19-2008, 08:10 AM   #1
shams
Member
 
Registered: Jan 2004
Posts: 396

Rep: Reputation: 30
Exclamation Problem connectiong with WS-806 CDMA usb modem in fedora 8?


hi,
i have fedora 8 and want to use WS-806 CDMA usb modem to connect to the internet but doesn't work i read a tutorial and this is what i did:
First i loaded the cdc_acm module and add to the /rc.d/rc.local to load at boot next i did /sbin/lsusb:
Bus 002 Device 004: ID 04f2:b016 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 0951:1607 Kingston Technology
Bus 002 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
this is the usb port with which the usb modem is attached:
Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc.
then i created a file Cygnal_Integrated.options and put it in the /etc/modprobe.d to laod at boot time, this is the file contents:
alias usb:v10C4pEA60* usbserial
options usbserial vendor=0x10c4 product=0xea60
after reboot i did:
dmesg | grep usb:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usb usb5: configuration #1 chosen from 1 choice
usb usb6: configuration #1 chosen from 1 choice
usb usb7: configuration #1 chosen from 1 choice
usb 2-4: new high speed USB device using ehci_hcd and address 3
usb 2-4: configuration #1 chosen from 1 choice
usb 2-5: new high speed USB device using ehci_hcd and address 4
usb 2-5: configuration #1 chosen from 1 choice
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
usb-storage: device scan complete
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbserial_generic 5-1:1.0: generic converter detected
usb 5-1: generic converter now attached to ttyUSB0
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters

But after all that the wvdialconf didn't get connect to the modem and this is the errors:
#wvdialconf wvdial.conf
Editing `wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

any one can help please?

Last edited by shams; 04-19-2008 at 09:25 PM.
 
Old 06-26-2008, 03:00 AM   #2
kishorko
LQ Newbie
 
Registered: Jun 2008
Location: Nepal
Distribution: Fedora 8, Red Hat 9 on two computers
Posts: 1

Rep: Reputation: 0
I have the same kind of problem. The fedora 8 detects the usb ports and says like "full speed USB................." but it doesnt shows the modem connected to it like /tty/usb0 or others whatever. How can I configure my computer that recognizes the cdma modem? I am using ZTE's WP805A CDMA fixed phone in Nepal.

Thanks in advance, and I request, please any one help me, I am absolutely new in the universe of Linux Operating System.

Thank you again.

Kishor
Kathmandu Don Bosco College.
 
Old 04-12-2010, 09:29 AM   #3
davidlin
LQ Newbie
 
Registered: Apr 2010
Posts: 1

Rep: Reputation: 0
Post ZTE wp805a

I use same kind of phone both for windows and fedora and i don't have any problem in both. The only things you have to select is serial port from the option. Becareful, after browing session is disconnected from fedora it wouldn't work easily work in windows XP. you have to reboot the phone again for using in windows XP.

maitidevi-32
kathmandu
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
i have this error message when i connected cdma usb modem debianlam Linux - Networking 1 05-04-2008 07:38 AM
lg cdma usb modem drivers required ummer k m Fedora 1 11-19-2007 02:29 AM
how to setting up Guomai CDMA PCMCIA Modem on Fedora Core 6 th34ng3l Linux - Hardware 1 01-30-2007 01:49 AM
CDMA Modem via USB not working in SuSE 10 akabatman2 Suse/Novell 3 11-09-2005 10:02 PM
USB to serial convertor + CDMA modem priya_siddharth Linux - Hardware 1 04-11-2004 07:34 AM


All times are GMT -5. The time now is 07:03 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration