Exit code=10 means that the PPP negotiation failed,have a look at man pppd.
It's possible that your /etc/wvdial.conf is not set up properly,mines looks like this:
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Phone =
Username =
Password =
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Idle Seconds = 300
ISDN = 0
Auto DNS = 1
[Dialer Defaults]
Modem = /dev/ttySLT0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
When I run wvdial this is the output:
[root@localhost lachlan]# wvdial
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT<ISP TEL. No.>
--> Waiting for carrier.
ATDT<ISP TEL No.>
CONNECT 52000 V42bis
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Oct 20 20:39:56 2003
--> pid of pppd: 1848
Hope this is of some help.
Lachlan
|