|
PCTV and FC6 Sound Again
Hey,
I know sound is a common issue with the PCTV cards, but it sounds like some people have had success. I have a PCTV stereo card and have gotten the audio working.
dmesg | grep bttv
------------------------
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:14.0, irq: 11, latency: 32, mmio: 0xd7001000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffebff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=6 info="NTSC / stereo" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
modprobe.conf file
--------------------------
alias char-major-81 videodev
alias char-major-81-0 saa7134
options saa7134 card=26 tuner=33
options tda9887 port2=1 qss=0
I've yet to get a /dev/dsp0 device to show up and was wondering how people got the sound to work. I thought I had the sound once, but it was just a bunch of popping noises coming through the line-in crossover and I think it is possible to get the sound through the bus. Either way, can someone help me with this problem? Thanks!
David Cheeseman
|
