LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   pci based usb hc based on necd72010xf1 and pinnacle pctv card bt878 based (http://www.linuxquestions.org/questions/linux-hardware-18/pci-based-usb-hc-based-on-necd72010xf1-and-pinnacle-pctv-card-bt878-based-776421/)

ashwani_gupt 12-17-2009 08:34 AM

pci based usb hc based on necd72010xf1 and pinnacle pctv card bt878 based
 
1 Attachment(s)
dear friends,

i have a ibm netvista pc p3-933 having 82801+82815.ubuntu9.04 is installed on the system.i have installed two cards on it they are:-

1.intex 586 4+1 usb 2.0 pci based host controller based on nec d72020xf1 chip.
2.pinnacle pctv card studio/rave having bt878 chip with tda 9887.

the dmesg and lspci reports are attached with this request.i'm having the following problems/questions regarding them.i will be very thankful for any support that you may lend.

regarding usb card:-

i would like to know if ohci & ehci drivers are installed on my system.
if yes then are they sufficient to run this card.if no then from where can i get them.to me it seems from dmesg that these drivers are there but there is a reset problem.what it could be due to i dont know.

from the documentation i'hve seen regarding 72010 and ohci/ehci it appears that any ohci/ehci driver should be able to drive all type of ohci/ehci cards.am i correct?


regarding pctv card:-

is the required driver available on my system.
is any application available for running this card,and how can it be had.here again it seems that the driver bttv is available but no application seems to be available.which could be the simplest app that should require least amount of associated download?




i will be thankful for any help on these problems .

thnx
ashwani


All times are GMT -5. The time now is 07:07 AM.