I'm having difficulties in getting my OV518+/OV6130 camera to work under Mandrake 9.2.

I have another camera, OV511+/OV6120 that works fine with both the 2.25 (comes with 9.2) and 2.27 drivers (latest stable).

Here is what I do:
modprobe ovcamchip
modprobe ov511

This works just fine but then when I physically plug the camera into my system, it takes about 8 seconds until my entire system freezes and requires a hard reset.

With debug set at 5 for ovcamchip and ov511, here is the last 20 or so entries from dmesg:

ov6x30.c: [ov6x30_set_control:243] id=9, arg=0, rc=0
ov511_core.c: [ov518_i2c_adap_write_byte:1212] (0xC0) 0x12
ov511_core.c: [reg_w:717] 0x43:0x12
ov511_core.c: [reg_w:717] 0x47:0x03
ov511_core.c: [reg_w:717] 0x47:0x05
ov511_core.c: [reg_r:764] 0x45:0x24
ov511_core.c: [ov518_i2c_adap_read_byte:1194] (0xC0) 0x24
ov511_core.c: [ov518_i2c_adap_write_byte_data:1263] (0xC0) 0x12:0x24
ov511_core.c: [reg_w:717] 0x42:0x12
ov511_core.c: [reg_w:717] 0x45:0x24
ov511_core.c: [reg_w:717] 0x47:0x01
ov6x30.c: [ov6x30_set_control:243] id=10, arg=0, rc=0
ov511_core.c: [i2c_attach_inform:1614] i2c attach client [OV6630] with [i2c ovcamchip driver]
ov511_core.c: Device at usb-00:07.2-1 registered to minor 0
ov511_core.c: [ov51x_probe:5580] probing for device...
ov511_core.c: [ov51x_probe:5580] probing for device...
ov511_core.c: [ov51x_probe:5580] probing for device...


What can I do? It is also interesting to note that the driver reports that the imager is OV6630, huh.

Any ideas? Thanks in advance.