No Sound on SoundBlaster Audigy Platinum EX -- Running Fedora Core 4

ViROID · 04-22-2006, 10:20 AM

I was unable to get the test sound to play when FC5 was installed, I've unmuted all of the mixer items in aslamixer, still nothing.. Thanks in advance for your reply's.

[root@AmoebaDMP ~]# lsmod
Module Size Used by
hci_usb 20181 0
radeon 100321 1
drm 68181 2 radeon
ppdev 12741 0
autofs4 22981 1
hidp 24001 2
rfcomm 42709 0
l2cap 31681 10 hidp,rfcomm
bluetooth 52901 4 hci_usb,hidp,rfcomm,l2cap
sunrpc 140925 1
ip_conntrack_ftp 11697 0
ip_conntrack_netbios_ns 6977 0
ipt_REJECT 9536 1
xt_state 6209 7
ip_conntrack 54040 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_stat e
nfnetlink 10457 1 ip_conntrack
xt_tcpudp 7233 9
iptable_filter 7105 1
ip_tables 16389 1 iptable_filter
x_tables 16965 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
video 18885 0
button 10577 0
battery 13253 0
ac 8901 0
ipv6 246433 14
lp 16265 0
parport_pc 29413 1
parport 38281 3 ppdev,lp,parport_pc
floppy 61829 0
nvram 12617 0
ati_remote 14921 0
usblp 17473 0
ohci1394 35845 0
ieee1394 292761 1 ohci1394
ehci_hcd 33229 0
ohci_hcd 23901 0
sg 36317 0
snd_emu10k1_synth 10945 0
snd_emux_synth 35521 1 snd_emu10k1_synth
snd_seq_virmidi 11201 1 snd_emux_synth
snd_seq_midi_emul 9921 1 snd_emux_synth
snd_emu10k1 108357 2 snd_emu10k1_synth
snd_rawmidi 28097 2 snd_seq_virmidi,snd_emu10k1
snd_ac97_codec 87905 1 snd_emu10k1
snd_ac97_bus 6465 1 snd_ac97_codec
snd_seq_dummy 7749 0
snd_seq_oss 33345 0
snd_seq_midi_event 11073 2 snd_seq_virmidi,snd_seq_oss
snd_seq 52401 8 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul ,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
hostap_plx 58261 0
snd_pcm_oss 49105 0
snd_mixer_oss 20417 1 snd_pcm_oss
hostap 106953 1 hostap_plx
ieee80211_crypt 10049 1 hostap
snd_pcm 81093 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
orinoco_plx 10957 0
3c59x 46057 0
orinoco 40789 1 orinoco_plx
snd_seq_device 12877 7 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd _rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_timer 26693 3 snd_emu10k1,snd_seq,snd_pcm
snd_page_alloc 14537 2 snd_emu10k1,snd_pcm
snd_util_mem 9025 2 snd_emux_synth,snd_emu10k1
amd76x_edac 8385 0
hermes 11457 2 orinoco_plx,orinoco
i2c_amd756 10309 0
snd_hwdep 13637 2 snd_emux_synth,snd_emu10k1
emu10k1_gp 7873 0
gameport 19401 2 emu10k1_gp
edac_mc 18069 1 amd76x_edac
mii 9281 1 3c59x
i2c_core 24897 1 i2c_amd756
snd 55109 15 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd _seq_device,snd_timer,snd_hwdep
soundcore 13345 1 snd
dm_snapshot 20205 0
dm_zero 6209 0
dm_mirror 24081 0
dm_mod 54745 6 dm_snapshot,dm_zero,dm_mirror
ext3 121929 2
jbd 57173 1 ext3
aic7xxx 134389 2
scsi_transport_spi 25409 1 aic7xxx
sd_mod 20545 3
scsi_mod 129641 4 sg,aic7xxx,scsi_transport_spi,sd_mod
[root@AmoebaDMP ~]# lspci -v
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
Flags: bus master, medium devsel, latency 64
Memory at ec000000 (32-bit, prefetchable) [size=64M]
Memory at e800d000 (32-bit, prefetchable) [size=4K]
I/O ports at 1cf0 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal d ecode])
Flags: bus master, 66MHz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=02, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e8100000-e82fffff
Prefetchable memory behind bridge: f0000000-f7ffffff

00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA (rev 02)
Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE (rev 01) (prog-if 8a [Mast er SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at f000 [size=16]

00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI (rev 01)
Flags: medium devsel

00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB (rev 07) (prog-if 10 [OHC I])
Flags: bus master, medium devsel, latency 16, IRQ 19
Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]

00:08.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at e8005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2

00:08.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at e8006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2

00:08.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at e8007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2

00:08.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: ALi Corporation USB 2.0 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at e800b800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:0a.0 Network controller: Standard Microsystems Corp [SMC] SMC2602W EZConnect / Addtron AWA-100 / Eu mitcom PCI WL11000 (rev 02)
Subsystem: Standard Microsystems Corp [SMC] SMC2602W EZConnect / Addtron AWA-100 / Eumitcom PC I WL11000
Flags: medium devsel, IRQ 18
I/O ports at 1800 [size=128]
Memory at e8008000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1c80 [size=64]

00:0c.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 1cc0 [size=32]
Capabilities: [dc] Power Management version 2

00:0c.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Flags: bus master, medium devsel, latency 64
I/O ports at 1cf8 [size=8]
Capabilities: [dc] Power Management version 2

00:0c.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at e800b000 (32-bit, non-prefetchable) [size=2K]
Memory at e8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

00:0d.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Tyan Computer Thunder K7 S2462
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 16
BIST result: 00
I/O ports at 1000 [disabled] [size=256]
Memory at e8009000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

00:0d.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Tyan Computer Thunder K7 S2462
Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 17
BIST result: 00
I/O ports at 1400 [disabled] [size=256]
Memory at e800a000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

00:0f.0 Ethernet controller: 3Com Corporation 3c980-C 10/100baseTX NIC [Python-T] (rev 78)
Subsystem: Tyan Computer Thunder K7 S2462
Flags: bus master, medium devsel, latency 80, IRQ 18
I/O ports at 1880 [size=128]
Memory at e800bc00 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30040000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

00:10.0 Ethernet controller: 3Com Corporation 3c980-C 10/100baseTX NIC [Python-T] (rev 78)
Subsystem: Tyan Computer Thunder K7 S2462
Flags: bus master, medium devsel, latency 80, IRQ 19
I/O ports at 1c00 [size=128]
Memory at e800c000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 30060000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

01:05.0 VGA compatible controller: ATI Technologies Inc R200 BB [Radeon All in Wonder 8500DV] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon 8500 AIW DV Edition
Flags: bus master, stepping, 66MHz, medium devsel, latency 66, IRQ 17
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 2000 [size=256]
Memory at e8120000 (32-bit, non-prefetchable) [size=128K]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8140000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

01:05.1 PCI bridge: ATI Technologies Inc R200 BC [Radeon All in Wonder 8500] (prog-if 00 [Normal decod e])
Flags: bus master, stepping, 66MHz, medium devsel, latency 64
Bus: primary=01, secondary=02, subordinate=02, sec-latency=68
Memory behind bridge: e8200000-e82fffff
Capabilities: [50] Power Management version 2

02:00.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Unknown device 5811
Flags: bus master, fast Back2Back, medium devsel, latency 96, IRQ 17
Memory at e8200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

----------------------

I tried to recompile the alsadriver, I got this error, what does it mean?

[root@AmoebaDMP driver]# ./configure
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for current directory... /root/Desktop/Alsa/driver
checking cross compile...
checking for directory with kernel source... /lib/modules/2.6.15-1.2054_FC5smp/s ource
checking for directory with kernel build... /lib/modules/2.6.15-1.2054_FC5smp/bu ild
checking for kernel version... 2.4.20
checking for GCC version... Kernel compiler: Used compiler: gcc (GCC) 4.1.0 200 60304 (Red Hat 4.1.0-3)

*** NO PREDEFINED KERNEL COMPILER IS DETECTED
*** Assuming the same compiler is used with the current system compiler.

*** Please make sure that the same compiler version was used for building kernel .

checking for built-in ALSA... "no"
checking for existing ALSA module... "no"
checking for Red Hat kernel... "auto"
checking for Red Hat kernel... "no"
checking for SUSE kernel... "auto"
checking for SUSE kernel... "no"
checking to modify of kernel linux/kmod.h... "yes"
cat: /lib/modules/2.6.15-1.2054_FC5smp/source/include/linux/kmod.h: No such file or directory
checking for kernel linux/compiler.h... "yes"
checking for kernel linux/pm.h... "yes"
checking for kernel linux/spinlock.h... "yes"
checking for kernel linux/irq.h... "yes"
checking for kernel linux/threads.h... "yes"
checking for kernel linux/rwsem.h... "no"
checking for kernel linux/gameport.h... "yes"
checking for kernel linux/devfs_fs_kernel.h... "no"
checking for kernel linux/highmem.h... "no"
checking for kernel linux/workqueue.h... "no"
checking for kernel linux/dma-mapping.h... "no"
checking for kernel asm/hw_irq.h... "yes"
checking for kernel linux/device.h... "no"
checking for kernel linux/jiffies.h... "no"
checking for kernel linux/compat.h... "no"
checking for kernel linux/adb.h... "yes"
checking for kernel linux/cuda.h... "yes"
checking for kernel linux/pmu.h... "yes"
checking for kernel linux/moduleparam.h... "no"
checking for kernel linux/syscalls.h... "no"
checking for kernel linux/firmware.h... "no"
checking for exported symbol dump_stack... grep: /lib/modules/2.6.15-1.2054_FC5s mp/source/kernel/ksyms.c: No such file or directory
"no"
checking for kernel module symbol versions... "no"
checking for PCI support in kernel... "no"
checking for I2C driver in kernel... unknown
checking for firmware loader... unknown
checking for input subsystem in kernel... unknown
checking for directory to store kernel modules... /lib/modules/2.4.20/misc
checking for verbose printk... on
checking for debug level... none
checking for ISA support in kernel... "no"
checking for processor type... "unknown"
checking for SMP... "no"
checking for Video device support in kernel... "no"
checking for ISA PnP driver in kernel... yes
checking for PnP driver in kernel... no
checking for Kernel ISA-PnP support... "no"
checking for Kernel ISA-PnP module support... "no"
no
checking for strlcpy... "no"
checking for snprintf... "no"
checking for vsnprintf... "no"
checking for scnprintf... "no"
checking for sscanf... "no"
checking for vmalloc_to_page... "no"
checking for old kmod... "yes"
checking for PDE... "no"
checking for pci_set_consistent_dma_mask... "no"
checking for pci_dev_present... "no"
checking for msleep... "no"
checking for tty->count is the atomic type... "no"
checking for io_remap_pfn_range... "no"
checking for new io_remap_page_range... "no"
checking for kcalloc... "no"
checking for saved_config_space in pci_dev... "no"
checking for driver version... 1.0.9rc4a
checking for sequencer support... yes
checking for OSS/Free emulation... yes
checking for RTC callback support in kernel... "no"
checking for HPET support... "no"
checking for Procfs support... "no"
checking for USB support... "no"
checking for USB module support... "no"
checking for PC-Speaker hook... "no"
checking for kernel PCMCIA
checking for PCMCIA support... "no"
checking for PCMCIA module support... "no"
checking for PC9800 support in kernel... "no"
checking for parallel port support... "no"
checking for parallel port module support... "no"
checking for which soundcards to compile driver for... all
configure: creating ./config.status
config.status: creating version
config.status: creating Makefile.conf
config.status: creating snddevices
config.status: creating utils/alsa-driver.spec
config.status: creating utils/buildrpm
config.status: creating toplevel.config
config.status: creating utils/alsasound
config.status: creating utils/alsasound.posix
config.status: creating include/config.h
config.status: creating include/config1.h
config.status: creating include/version.h
config.status: include/version.h is unchanged
config.status: creating include/autoconf-extra.h
[root@AmoebaDMP driver]#

GrueMaster · 04-23-2006, 07:14 PM

After looking at your configure log, it would appear that either you don't haqve the kernel-devel package installed (kernel-smp-devel for smp kernel), or that the folks at RedHat screwed up when they built the distro. I'd opt for the first one, but wouldn't be surprised by the second.

Is there anything at /usr/src/? There should be either a kernels directory, or a linux-<kernel version> or something along those lines.

ViROID · 04-24-2006, 03:44 PM

Appearently FC5 only installs the Kernel Source Headers, supposedly thats all they think you need. I downloaded and installed the Kernel Source and I can compile now but I still don't have sound output. FC5 detects my soundcard, the driver seems to be installed properly and I've messed with all the settings in alsamixer, unmuted everything and turned up the volume on all of the mixer channels, nothing.

Any suggestions? anyone?

...V