no sound, but sound card detected ok
 

Hey everybody,

Did a switch from mandrake 9 to red hat (kernel 2.4.18-14) yesterday...pretty smooth install, but can't get sound working. (Worked fine before, and still works under WinXP dual-boot)

It correctly recognizes my sound card as:
Vendor: Creative Labs
Model: SB Audigy
Module: audigy

But "Play test sound" doesn't do anything, neither does Grip or XMMS.
It will act like its playing a CD (switch tracks, etc.), but no sound.

I turned on "enable sound server startup" in Sound Preferences.

Maybe it has to do with ALSA module? I didn't install that with RH...

Here is (what I think is) all relevant output. I included stuff about cdrom drives too, because of what it says at the end of dmesg. I just had a regular music CD in the drive.

Any help would be much appreciated :)

jessica


# lspci
...
00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)00:0d.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
...

# dmesg
...
hdb: Pioneer DVD-ROM ATAPIModel DVD-120, ATAPI CD/DVD-ROM drive
hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
...
hdb: ATAPI 40X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS2
Type: CD-ROM ANSI SCSI revision: 02
...
Creative EMU10K1 PCI Audio Driver, version 0.19a, 12:25:00 Sep 4 2002
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 01:00.0
emu10k1: Audigy rev 3 model 0x0053 found, IO at 0xb400-0xb41f, IRQ 11
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!

is it on "mute"? lmao.

you have R.H. 9.0 now?

I think the same as drkfir5: alsa driver are always "mute" by default. Try alsamixer

NB

Make sure you have the mp3 plugin as well..it does not come with RH

Hope that helps...

heh, my bad

I don't have alsamixer, but turning up the volume in aumix did the trick.

Thanks everybody! You all win the prize.

And now if only I could get X to use more than 256 colors....Ah well, I'll fiddle a bit more before posting a new thread.

jessica

I win The Prize! Muahahah!