New hardware installation
 

Hi Guys

Please advice

I have installed a new hardware called SANGOMA which is for PBX configuration. Currently i want to view if my Centos is detecting it.

I have entered lspci -v command and here is the output:

0a:09.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card
Subsystem: Unknown device a500:3500
Flags: bus master, medium devsel, latency 41, IRQ 10
Memory at d0200000 (32-bit, non-prefetchable) [size=64K]

Please advice if this indicates that centos has detected it and its ready to be used.

My problem is that it states that 32-bit, non-prefetchable which causes confusion in me as is it ready or not ready to be used.

Your urgent assistance will be greatly appreciated.

Regards
Muks

Linux has detected the device but it doesn't know what driver to use. You may need to ask the vendor for a driver or ask the vendor what generic driver would work for this device.

lspci -vnn : Should show the "pci id".

http://www.pcidatabase.com/vendors.php?sort=id

http://www.pcidatabase.com/search.ph...search+devices

Asterisk used have a good collection of drivers for that stuff. Are you using that? Are you sure it shows on the pci bus?