LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 10-07-2005, 05:42 PM   #1
kalkulus
LQ Newbie
 
Registered: Oct 2005
Posts: 4

Rep: Reputation: 0
NEC ND-3540a problem burning CD-RW


when I try to burn cd-rw that I erased just a minut ago k3b reports input/output errors and after that it won't read CDs any more. it reads DVDs just fine. I tried it on two drives with the same CD-RW and they both stopped reading CDs. can it be the bad CD-RW? I've never heard of bad disk destroying the drive


I'm using Slackware 10.2, kernel is 2.4.31. no scsi emulation, but cdrecord uses dev=ATAPI:0,0,0 option

here's the debug data
Code:
System
-----------------------
K3b Version: 0.12

KDE Version: 3.4.2
QT Version:  3.3.4
Kernel:      2.4.31
Devices
-----------------------
_NEC DVD_RW ND-3540A 1.01 (/dev/hdc, ) at /cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R96R; Restricted Overwrite]

Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
scsidev: 'ATAPI:/dev/hdc'
devname: 'ATAPI:/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at THE_FORUM_COMPLAINS_ABOUT_THE_URL
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-3540A '
Revision       : '1.01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x002B 
Profile: 0x001B 
Profile: 0x001A 
Profile: 0x0015 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x0011 
Profile: 0x0010 
Profile: 0x000A (current)
Profile: 0x0009 
Profile: 0x0008 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1343488 = 1312 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   637 MB        
Total size:      732 MB (72:33.22) = 326492 sectors
Lout start:      732 MB (72:35/17) = 326492 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 33357
Starting to write CD/DVD at speed 10 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of  637 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 01 F0 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.104s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
/usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0xa (Reserved)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 D0 36
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 81% done
cmd finished after 22.060s timeout 200s
/usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0xa (Reserved)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 FF FF
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 99% done
cmd finished after 22.170s timeout 200s
write track data: error after 1015808 bytes
Writing  time:   72.639s
Average write speed  72.3x.
Fixating...
/usr/bin/cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0xa (Reserved)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 80 FF FF
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) operation 99% done
cmd finished after 2.000s timeout 200s
/usr/bin/cdrecord: Caught interrupt.
Trouble flushing the cache
BURN-Free was never needed.
/usr/bin/cdrecord: fifo had 80 puts and 17 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 5 times full, min fill was 95%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=ATAPI:/dev/hdc speed=10 -dao driveropts=burnfree -eject -data /d/Temp/slackware.10.2_1.iso
dmesg
Code:
Linux version 2.4.31 (root@meanX) (gcc version 3.3.6) #4 Thu Oct 6 20:35:07 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 KT400A                                    ) @ 0x000f71d0
ACPI: RSDT (v001 KT400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 KT400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 KT400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7fc0
ACPI: DSDT (v001 KT400A AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Kernel command line: BOOT_IMAGE=Linux-novi ro root=302
Initializing CPU#0
Detected 1533.211 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3060.53 BogoMIPS
Memory: 515464k/524224k available (1740k kernel code, 8372k reserved, 592k data, 108k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfbae0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
BIOS EDD facility v0.11 2004-Jun-21, 2 devices found
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:0f.0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.0
    ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD2000JB-00GVA0, ATA DISK drive
hdb: QUANTUM FIREBALLlct20 30, ATA DISK drive
blk: queue c0391e60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0391f9c, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 390721968 sectors (200050 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=3649/255/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
 hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
Via 686a/8233/8235 audio driver 1.9.1-ac3
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97  codec, id: ALG96 (Unknown)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xBC00, IRQ 11
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 108k freed
Adding Swap: 514072k swap-space (priority -1)
Adding Swap: 208804k swap-space (priority -2)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver v1.1.22 [Flags: R/O MODULE]
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  ANOTHER_URL
eth0: VIA VT6102 Rhine-II at 0xc000, 00:04:61:61:7e:c4, IRQ 11.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.4: irq 11, pci mem e0d05000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 20:28:28 Oct  6 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 288 bytes per conntrack
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
PPP BSD Compression module registered
PPP Deflate Compression module registered
spurious 8259A interrupt: IRQ7.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
PPP BSD Compression module registered
PPP Deflate Compression module registered
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Cannot read medium - incompatible format -- (asc=0x30, ascq=0x02)
  The failed "Send DVD Structure" packet command was: 
  "ad 00 00 00 00 00 00 00 00 20 00 00 "
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid command operation code -- (asc=0x20, ascq=0x00)
  The failed "<NULL>" packet command was: 
  "3c 00 00 00 00 00 00 00 04 00 00 00 "
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 10 00 00 00 "
  Error in command data byte 7
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Cannot read medium - incompatible format -- (asc=0x30, ascq=0x02)
  The failed "Send DVD Structure" packet command was: 
  "ad 00 00 00 00 00 00 00 00 20 00 00 "
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 3c 00 00 00 "
  Error in command data byte 12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid command operation code -- (asc=0x20, ascq=0x00)
  The failed "<NULL>" packet command was: 
  "3c 00 00 00 00 00 00 00 04 00 00 00 "
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
hdc: irq timeout: status=0xd0 { Busy }
hdc: irq timeout: error=0xd0LastFailedSense 0x0d 
hdc: DMA disabled
hdc: ATAPI reset complete
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x54
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Invalid field in parameter list -- (asc=0x26, ascq=0x00)
  The failed "Mode Select 10" packet command was: 
  "55 10 00 00 00 00 00 00 10 00 00 00 "
  Error in command data byte 7
cdrom: open failed.
lspci -v, the relevant data
Code:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
	Subsystem: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
	Flags: bus master, 66Mhz, medium devsel, latency 8
	Memory at e8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [80] AGP version 3.5
	Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: ec000000-edffffff
	Prefetchable memory behind bridge: e0000000-e7ffffff
	Capabilities: [80] Power Management version 2

00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at a800 [size=16]
	Capabilities: [c0] Power Management version 2

Last edited by kalkulus; 10-08-2005 at 08:13 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
NEC ND-3540A DVD Burner Matir Linux - Hardware 12 07-21-2005 09:40 PM
problem with nec dvdrw linuxmandrake Linux - Hardware 0 06-15-2005 12:15 PM
NEC/Mit. 930SB Problem swinchen Linux - Hardware 3 10-22-2004 08:12 AM
DVD-R burning in SuSE 9.1 with NEC-1300A ianunderwood Linux - General 1 06-11-2004 11:53 AM
audiocd burning problem, whole system hangs while burning ichbinesderelch Linux - Software 1 11-14-2003 02:30 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:37 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration