Monitor don't want 1280x1024 60 Hz
My monitor under Suse10.2 allways installs 1280x1024 75 Hz. This brings my screen to a small stripe of 5 mm om the right side. If I try to modify the resolution bye thr hardwareswitches on the screen, it always tells me 1280x1024x75 Hz. Best resolution will be at 1280x1024x60 Hz. I have used the program
gtf 1280 1024 60 and I modify the file for graphics I get 1600x1024x60 with this values under windows it works well I see Hf 63.9 Hz Vf 60 Hz and 1280x1024 What I have to do ? Paul7 |
The monitor just displays the signal it gets from the graphics card. So, you should try configuring the graphics card.
The tool to use in SuSE is SaX2. |
Edit the file /etc/X11/xorg.conf and find the Monitor section. My xorg.conf file has here:
Code:
HorizSync 31.0 - 81.0 Code:
VertRefresh 60.0 - 60.0 |
not better
I try several things to get a solution.
I try lspci I got 01.00.0 ATI Radeon R200 QM (Radeon 9100) at the hardware I see Samsung TFT LCD 17" in front. Behind I see Orion in yast I saw before Monitor ---- Screen SEC 170EI-AD1-V50 1280-1024 SXVGA 16.7 M 24 B Now I tried to go to ATI to find the driver for this monitor http://ati.amd.com/support/drivers/l...n-prer200.html There you can find a Driver 8,28.8 I download all what is neccessary. After download I start the extraction. It offers me a direct installation or build a RPM After building the RPM you get the information that you have to aticonfig at console level and you have to save the xconfiguration. The program do it anyway than you kwow the name of the file for recovering. I run everything and restart the system. the system starts up but it will not go to the X I restored the old config The system start nearly than before, If I use YAST/Sax2 I see Monitor ATI Radeon R200 QM screen is the the same as before but now all things ar more bat then before xorg.conf generated bz aticonfig is buggy but I have to find out. What can I do Paul7 |
My suggestion requires changing just one line in xorg.conf, and you can very easily change it back. So far as I can tell, you haven't tried it.
What bigrigdriver has told you is not correct. It is not the graphics card or the video driver that determine the signal timings to the monitor. X Windows does that. And the way you control what X Windows does is through what you put in the xorg.conf file. |
Your monitor lies to you. :)
|
Quote:
VertRefresh 43-76 -> 60-60 after reboot I get 1600x1024 60 Hz and the warning message from the Monitor that the best is 1280x1024 Hz this does't go away so I changed back to the origine. Now I try to modify which was generated by aticonfig |
X doesn't know you want 1280x1024 unless you tell it. In the Screen section, you want something similar to this:
Code:
DefaultDepth 24 |
Quote:
the system don't want to go to Graphical mode what is so different in SUSE 10.2 or inside the driver during boottime the system use the right values, I chect it with the hardware button on the screen. The same I by shutdown.At this time I have Hf 63.9 Hz and Vf 60 Hz. This are te values I want later too. The trouble starts when I go to X aand ends when I left. I think it is realy a driver problem which is loaded when you go to X. the origine is radeon. i changed it to fglxr, but this don't want to go to X. Do you know the name of the low level driver? Maybe this will help!!! |
Maybe you should post the sections device, monitor and screen from your xorg.conf so we can have a look at them.
And a monitor does NOT need/have a driver. |
I'd guess the free driver you'd use is "radeon" or "ati". X will guess which driver is best and construct a .conf file for you if you exit X and say "Xorg -configure". (But it won't use the non-free fglxr driver.)
|
This is my complete xorg.conf. I don't see anything what should be wrong.
If I switch the screen to 60 Hz with a desktop tool, it goes to 1600x1024. This is line in the section modes. Thak you. Paul # /.../ # SaX generated X11 config file # Created on: 2007-07-23T21:21:38+0700. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/opt/kde3/share/fonts" FontPath "/usr/local/share/fonts" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection Section "Module" Load "dri" Load "freetype" Load "type1" Load "dbe" Load "glx" Load "extmod" Load "v4l" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc105" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Name" "ImExPS/2 Generic Explorer Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 340 270 HorizSync 29-81 Identifier "Monitor[0]" ModelName "170EI-A01-V50" Option "DPMS" VendorName "SEC" VertRefresh 43-76 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 Modeline "1280x1024" 119.40 1280 1368 1504 1728 1024 1025 1028 1063 Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 Modeline "1280x960" 122.11 1280 1368 1504 1728 960 961 964 1000 Modeline "1280x960" 111.52 1280 1360 1496 1712 960 961 964 997 Modeline "1280x960" 102.10 1280 1360 1496 1712 960 961 964 994 Modeline "1280x800" 100.78 1280 1360 1496 1712 800 801 804 833 Modeline "1280x800" 92.08 1280 1352 1488 1696 800 801 804 831 Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 Modeline "1152x864" 97.69 1152 1224 1344 1536 864 865 868 900 Modeline "1152x864" 90.02 1152 1224 1344 1536 864 865 868 897 Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 Modeline "1280x768" 95.88 1280 1352 1488 1696 768 769 772 800 Modeline "1280x768" 88.42 1280 1352 1488 1696 768 769 772 798 Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 Modeline "1024x768" 76.89 1024 1080 1192 1360 768 769 772 800 Modeline "1024x768" 70.07 1024 1080 1184 1344 768 769 772 798 Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "1280x600" 80.06 1280 1344 1480 1680 600 601 604 627 Modeline "1280x600" 73.49 1280 1336 1472 1664 600 601 604 625 Modeline "1280x600" 67.08 1280 1336 1464 1648 600 601 604 623 Modeline "1280x600" 61.50 1280 1336 1464 1648 600 601 604 622 Modeline "1024x600" 64.04 1024 1080 1184 1344 600 601 604 627 Modeline "1024x600" 58.65 1024 1072 1176 1328 600 601 604 625 Modeline "1024x600" 54.05 1024 1072 1176 1328 600 601 604 623 Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 Modeline "800x600" 45.93 800 840 920 1040 600 601 604 625 Modeline "800x600" 42.33 800 840 920 1040 600 601 604 623 Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 Modeline "768x576" 42.06 768 800 880 992 576 577 580 600 Modeline "768x576" 38.82 768 800 880 992 576 577 580 599 Modeline "768x576" 34.96 768 792 872 976 576 577 580 597 Modeline "640x480" 28.83 640 664 728 816 480 481 484 500 Modeline "640x480" 26.60 640 664 728 816 480 481 484 499 Modeline "640x480" 23.86 640 656 720 800 480 481 484 497 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "Radeon 9100 QM" BusID "1:0:0" Driver "radeon" Identifier "Device[0]" Option "usevnc" "no" Screen 0 VendorName "ATI" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection |
Hello
What you also could do, if you manage to return to the first situation (small stripe of 5 mm), is to use xvidtune to generate a modeline. See http://linux.die.net/man/1/xvidtune for details. Bye Koen Plessers |
good advice
i tried it and it worked
|
Quote:
|
All times are GMT -5. The time now is 10:46 AM. |