Here are some modem links I have collected. If that is a real hardware modem, see the instructions below the modem links.
# Modem and connection troubleshooting
WinModems and Linux
Modem HOWTO
Modem NHFs
Linmodems.org
Conexant/Rockwell modem HOWTO
The Unofficial PCTel Linux Driver page
I finaly got my PcTel hsp56 mr modem to work
Linux driver for Winmodems with Lucent Apollo (ISA) and Mars (PCI) chipsets
Lucent AMR modem listed as an Intel AC'97 - Smart Link Modems
The kppp Handbook
Dial-up Networking Configuration Using KDE's Kppp
Troubleshooting ISP Connection Problems
Connecting to AOL with Linux
# Configuring a real hardware pci modem
To configure a pci modem, open an x terminal and su - to the root account:
Code:
[fancy@tinwhistle fancy]$ su -
Password:
[root@tinwhistle root]# cat /proc/pci
Look for your modem in the returned list. Look for something similar to mine:
Code:
Bus 2, device 2, function 0:
Communication controller: PCI device 151f:0000 (TOPIC SEMICONDUCTOR Corp) (rev 0).
IRQ 5.
I/O at 0xc400 [0xc407].
With this info, I use the setserial command:
Code:
[root@tinwhistle root]# setserial /dev/ttyS0 irq 5 port 0xc400 uart 16550a
Then I test the modem with the internet connection wizard and it works. I edit /etc/rc.d/rc.local and enter the setserial command:
Code:
[root@tinwhistle root]# pico -w /etc/rc.d/rc.local
My file for an example
Code:
#!/bin/sh
# Redhat /etc/rc.d/rc.local file
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# configure modem
setserial /dev/ttyS0 irq 5 port 0xc400 uart 16550a
Now, it remains configured after a reboot.
