Mandriva 2006.0 and CD-RW
After updating to Mandriva 2006.0 Powerpack my "old" RICOH CD-R/RW MP7083A wich worked fine now freezes the system....these are some outputs:
[root@panoramix /]# dmesg | grep hd Kernel command line: root=/dev/hda1 resume=/dev/hda2 splash=silent vga=788 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: ST340810A, ATA DISK drive hdb: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive hdc: RICOH CD-R/RW MP7083A, ATAPI CD/DVD-ROM drive hdd: ST36421A, ATA DISK drive hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdc: set_drive_speed_status: error=0x04 { AbortedCommand } hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes not supported hdd: max request size: 128KiB hdd: 12596850 sectors (6449 MB) w/256KiB Cache, CHS=13330/15/63, UDMA(33) hdd: cache flushes not supported Adding 514040k swap on /dev/hda2. Priority:-1 extents:1 hdb: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA [root@panoramix /]# cdrecord -scanbus Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to warly at mandriva.com. Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 ######################################################################################### # # Warning: Using ATAPI via /dev/hd* interface. Use dev=ATA:X,Y,Z or dev=/dev/hdX # ######################################################################################### Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) * cdrecord: Warning: controller returns wrong size for CD capabilities page. 0,1,0 1) 'NEC ' 'CD-ROM DRIVE:282' '4.A2' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'RICOH ' 'CD-R/RW MP7083A ' '1.20' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [root@panoramix /]# cdrecord dev=/dev/hdc -scanbus Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to warly at mandriva.com. Note: The author of cdrecord should not be bothered with problems in this version. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. scsibus1: 1,0,0 100) 'RICOH ' 'CD-R/RW MP7083A ' '1.20' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [root@panoramix /]# cdrecord dev=ATAPI -scanbus Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to warly at mandriva.com. Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATAPI' devname: 'ATAPI' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) * cdrecord: Warning: controller returns wrong size for CD capabilities page. 0,1,0 1) 'NEC ' 'CD-ROM DRIVE:282' '4.A2' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'RICOH ' 'CD-R/RW MP7083A ' '1.20' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * ...and this is my /etc/fstab file: # This file is edited by fstab-sync - see 'man fstab-sync' for details /dev/hda1 / ext2 defaults 1 1 /dev/hdb /mnt/cdrom auto umask=0,user,iocharset=iso8859-15,codepage=850,noauto,ro,exec,users 0 0 /dev/hdc /mnt/cdrom2 auto umask=0,user,iocharset=iso8859-15,codepage=850,noauto,ro,exec,users 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,umask=0,iocharset=iso8859-15,sync,codepage=850 0 0 /dev/hdd1 /mnt/windows ntfs umask=0,nls=iso8859-15,ro 0 0 none /proc proc defaults 0 0 /dev/hda2 swap swap defaults 0 0 Some help or idea would be appreciate. TIA |
All times are GMT -5. The time now is 07:33 AM. |