Hi,

Fyi, I am testing our new Hp Storageworks 1/8 G2 Tape autoloader. However, it cannot detect at RHEL 4 AS (2.6.9-82.ELsmp). Herewith, I enclosed you the #lspci output

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
00:0b.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45)
00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21150 (rev 04)
00:0e.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
00:0f.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
00:14.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:14.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:14.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:14.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
01:07.0 Network controller: Compaq Computer Corporation Netelligent Integrated 10/100 TX UTP (rev 10)
01:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
01:09.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
01:0b.0 PCI bridge: IBM PCI to PCI Bridge (IBM27-82351) (rev 07)
02:00.0 Mass storage controller: Compaq Computer Corporation Smart-2/P RAID Controller (rev 03)


Please let me know if SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) is not suitable attach to HP Storageworks 1/8 G2 Tape Autoloader. Or you may recommend other suitable SCSI card for backup purpose. Thanks.