LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 10-06-2004, 09:51 AM   #1
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Rep: Reputation: 15
Kernel panic - HPT366 RAID


Sorry for the long post, but this is driving me insane!!

I am trying to build kernel 2.4.24 on Suse 9.0. The box has Highpoint
software RAID (hptraid) and / should be mounted on /dev/ataraid/d0p2.

I have used the stock 2.4.21-243 kernel as a starting point (because it
boots!) and have included support for reiserfs, Software RAID, and
NVIDIA IDE interfaces.

The exact error messages I receive on boot are:
-------------------------------------------
reiserfs:checking transaction log (device ataraid(114,2))
node level 0 does not match to the expected one
ataraid(114,2):vs_5150:search_by_key:invalid format found in block.Fsck?
ataraid(114,2):vs_13070:reiserfs_read_inode:i/o failure occurred trying
to find stat data of [1 2 0x0 50]
ataraid(114,2):Using r5 hash to sort names
VFS:Cannot open root device "ataraid /d0p2"
Please append a correct "root=" boot option
kernel panic:VFS:Unable to mount root fs
-------------------------------------------

The reiserfs filesystem isn't corrupt as it boots perfectly well using
kernel 2.4.21-243.

Any ideas?

Here is lspci:

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev10)
01:09.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 03)
01:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)




Thanks for any help.

Last edited by breenbaron; 10-28-2004 at 07:39 AM.
 
Old 10-06-2004, 01:20 PM   #2
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
For current raid info http://linux.yyz.us/sata/

Walt
 
Old 10-06-2004, 01:26 PM   #3
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
This is from here in the HCL.

http://www.linuxquestions.org/hcl/sh...hp?product=783
 
Old 10-06-2004, 02:31 PM   #4
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
Thanks for the reply.

CONFIG_BLK_DEV_HPT34X=y
CONFIG_BLK_DEV_HPT366=y

Are already included in the kernel config though.

I'll have a look tomorrow and try some of the other tips in the link you gave.

Cheers.
 
Old 10-07-2004, 06:27 AM   #5
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
Well, I've followed all of the advice in the article - compiling the necessary kernel options and I still get the same errors with vanilla 2.4.24 kernel.


With kernel 2.4.21, using the .config provided in the link, I can mount the / partition readonly due to resierfs superblock errors.

Yet the original SUSE kernel mount / on /dev/ataraid/d0p2 with no errors!!

Any other ideas??



Thanks a lot.

Last edited by breenbaron; 10-07-2004 at 07:47 AM.
 
Old 10-07-2004, 07:17 AM   #6
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
For 2.4.X kernel what is the dmesg output?
 
Old 10-07-2004, 07:58 AM   #7
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
Thanks again for your response.

I can only get the dmesg output from the SUSE kernel that boots(2.4.21-243)- because of either kernel panic (2.4.24) or read-only root filesystem(2.4.21).

Is this what you're looking for?

The error from 2.4.24 is shown above in my original post.


MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 393200
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 163824 pages.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75c0
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x5fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x5fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x5fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/ataraid/d0p2 vga=0x31a desktop hdb=ide-scsi hdblu
n=0 hdb=ide-scsi hdblun=0 hdb=ide-scsi hdblun=0 splash=silent
ide_setup: hdb=ide-scsi
ide_setup: hdblun=0
ide_setup: hdb=ide-scsi
ide_setup: hdblun=0
ide_setup: hdb=ide-scsi
ide_setup: hdblun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 2162.455 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4276.22 BogoMIPS
Memory: 1550424k/1572800k available (1730k kernel code, 21984k reserved, 606k data, 176k init, 655296k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs 18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
00:00:01[A] -> IRQ 5 Mode 1 Trigger 1
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
00:00:02[A] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
00:00:04[A] -> IRQ 10 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LIDE] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 98300
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xd8000000, mapped to 0xf8818000, size 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:f0c0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 148x51
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
HPT370: IDE controller at PCI slot 01:09.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT37X: using 50MHz internal PLL
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeMA, hdfio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgMA, hdhio
hda: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
hdb: LITE-ON DVDRW LDW-811S, ATAPI CD/DVD-ROM drive
hdc: SAMSUNG SV1203N, ATA DISK drive
blk: queue c03e8b54, I/O limit 4095Mb (mask 0xffffffff)
hde: SAMSUNG SV1203N, ATA DISK drive
blk: queue c03e8fe8, I/O limit 4095Mb (mask 0xffffffff)
hdg: SAMSUNG SV1203N, ATA DISK drive
blk: queue c03e947c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x9400-0x9407,0x9802 on irq 11
ide3 at 0x9c00-0x9c07,0xa002 on irq 11
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
hdg: attached ide-disk driver.
hdg: host protected area => 1
hdg: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hdc: hdc1 hdc2
hde: hde1 hde2
hdg: unknown partition table
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 364k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Highpoint HPT370 Softwareraid driver for linux version 0.01-ww1
No raid array found
ataraid/d0: ataraid/d0p1 ataraid/d0p2
Drive 0 is 114498 Mb
Drive 6 is 114498 Mb
Raid array consists of 2 drives.
No raid array found
No raid array found
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ataraid(114,2)) ...
for (ataraid(114,2))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Adding Swap: 1052216k swap-space (priority 42)
hda: attached ide-cdrom driver.
hda: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hdb: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: DVDRW LDW-811S Rev: HS0E
Type: CD-ROM ANSI SCSI revision: 02
bootsplash: silent jpeg found.
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xfc8d9000, 00:40:f4:89:72:5b, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[e3001000-e30017ff] Max Packet=[2048]
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000005fa4]
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: PCI device 10de:0068 (nVidia Corporation)
ehci_hcd 00:02.2: irq 11, pci mem fc8dd000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 15:48:47 Aug 12 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xfc8df000, IRQ 11
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xfc8e1000, IRQ 5
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47438
eth0: no IPv6 routers present
bootsplash: silent jpeg found.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 1430M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Linux video capture interface: v1.00
cdrom: This disc doesn't have any tracks I recognize!
 
Old 10-07-2004, 09:06 AM   #8
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
While you get a kernel panic with 2.4 what does dmesg say before that before reiserfs below?

The exact error messages I receive on boot are:
-------------------------------------------
reiserfs:checking transaction log (device ataraid(114,2))
node level 0 does not match to the expected one
ataraid(114,2):vs_5150:search_by_key:invalid format found in block.Fsck?


Do you get anything simular to the following with 2.4.21

ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
HPT370: IDE controller at PCI slot 01:09.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT37X: using 50MHz internal PLL
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:pio
 
Old 10-07-2004, 09:11 AM   #9
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
I am also curious do you have access to knoppix 3.6? If so try boot from it and see if you get the desired results? You will have to boot linux24 because it boots to linux 2.6.x kernel.
 
Old 10-07-2004, 11:12 AM   #10
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
with 2.4.21:

[drm] Initialised radeon 1.1.1 20010405 on minor 1
Uniform Multi-plaform E-IDE driver Revision:7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx
HPT370: IDE controller at PCI slot 01:09.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT37X: using 50MHz internal PLL
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hdeMA, hdfio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdgMA, hdhio



with 2.4.24 (before panic) some differences in dmsg output I've noticed:

Highpoint HPT370 Softwareraid driver for linux version 0.0.2
ataraid/d0: p1 p2
Drive 0 is 114498 Mb
Drive 1 is 114498 Mb
RAID 1 consists of 2 drives
Loading Adaptec I20 RAID controllers
Detecting Adaptec I20 RAID controllers...
Red Hat/Adaptec aacraid driver (1.1-3 Oct 6 2004 10:51:42)
Failed initialisation of WD-700 SCSi card!

megaraid: no BIOS enabled

I20 Block storage OSM v0.9
12o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ f7a99940
(512 byte buffers X 4 can_queue X 0 12o controllers)
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid 5 personality registered as nr 4
raid5: measuring checksumming speed
8regs :2715 MB/sec
32regs : 1710 MB/sec
pIII_sse :4935 MB/sec
pII_mmx : 4209.200 MB/sec
p5_mmx : 5553.200 MB/sec
raid5: using function: pIII_sse

LVM version 1.0.7
pci_hotplug: PCI hot plug
cpqphp.o: Compaq Hot Plug PCI controller
acpiphp: ACPI Hot plug PCI controller


Quite a lot of junk I can remove by the looks of it.

Out of interest, knoppix boots fine with linux24.

Thanks again.
 
Old 10-07-2004, 02:46 PM   #11
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
Hey I looked through your .config file for 2.4.24 and you have soo much extra stuff being compiled in you may want to go through and see what is need and not need. I think you are simply missing so thing with scsi control? I show up in you previous 2.21. dmesg. A cleaner .config may help out more.

walt
 
Old 10-07-2004, 02:56 PM   #12
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
The following is all you need either compile in or as a module:

insmod ataraid
insmod hptraid

Then you should be able to use the /dev/ataraid/d0pX notation.
 
Old 10-07-2004, 03:19 PM   #13
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
Hi Walt,

Thanks again for your help.

Both of those options are already compiled in the kernel and I've stripped a lot of junk out.


The problem arises when the transactin log for device ataraid(114,2) is checked:

reiserfs: checking transaction log (device ataraid(114,2)) for (ataraid(114,2)
is_tree_node: node level 10799 does not match to the expected one 4
ataraid(114,2):vs-5150: search_by_key: invalid format found in block 521998. Fsck?
ataraid(114,2):vs-13070: reiserfs_read_inode2: i/o failure ocurred trying to find stat data
ataraid(114,2):Using r5 hash to sort names
VFS:Cannot mount root device "ataraid/d0p2" or 72:02
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 72:02

reiserfsck makes no difference.

Do you think this is a SCSI problem?

I noticed that the kernel that boots assigns irq 11 to ide2 and ide3, while the "broken kernels" assign irq 17.

Is this an issue?

Cheers.
 
Old 10-07-2004, 04:03 PM   #14
ghostwalker
Member
 
Registered: Jun 2003
Posts: 160

Rep: Reputation: 30
You said that you could get knoppix to run correctly? If do lsmod to see what modules are loaded. See if those match the ones that you have compile into you kernel. I think I am at the end of the help I can give you. Take and go through the following to see if it of any help

http://www.kernel.org/pub/linux/kern...sata-raid.html

Also http://www.google.com/linux may help in your search......

Walt
 
Old 10-07-2004, 04:20 PM   #15
breenbaron
LQ Newbie
 
Registered: Mar 2004
Posts: 23

Original Poster
Rep: Reputation: 15
Hello again Walt,

I've already checked the output of lsmod.

I'll keep on trying.

Thanks for your help.

Nick.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kernel Panic: Booting into RAID 1 elliotfuller Linux - Hardware 0 09-07-2005 03:01 AM
Red Hat ES3, kernel panic on Dell raid controller wayloud Linux - Hardware 1 09-23-2004 07:43 AM
HPT370 detects and using module HPT366, change ?? DaveQB Linux - Hardware 0 02-19-2004 03:36 AM
Kernel 2.6, RAID-1 & reiserfs kernel panic Raptor Ramjet Slackware 2 01-04-2004 08:25 AM
SuSE 8.2 installation kernel panic with promise 20276 onboard RAID Controller Tarball_Phreak Linux - Hardware 0 11-06-2003 12:12 PM


All times are GMT -5. The time now is 12:46 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration