Hi,
I was wondering if someone could shed some light on issue I'm having before I take a screwdriver to my mobo.
I'm hoping to build a mythtv box but the dvb cards wont tune to anything.
I have tried them in a old socket A board and they scan and tune.
using
scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/ etc on the K8U-X
I get "WARNING: filter timeout pid <some id>" several times
lspci -vv
02:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: LeadTek Research Inc. WinFast DTV1000-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: LeadTek Research Inc. Unknown device 665f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
dmesg
[ 25.790488] CORE cx88[0]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35,autodetected]
[ 25.882054] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 25.946103] cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 18, latency: 64, mmio: 0xfa000000
[ 25.946161] cx88[0]/0: registered device video0 [v4l2]
[ 25.946186] cx88[0]/0: registered device vbi0
[ 25.946240] cx88[0]/2: cx2388x 8802 Driver Manager
[ 25.946261] cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 18, latency: 64, mmio: 0xfb000000
[ 27.710022] cx8802_register_driver() ->registering driver type=dvb access=shared
[ 27.710026] CORE cx88[0]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35]
[ 27.710030] cx88[0]/2: cx2388x based dvb card
[ 27.755706] DVB: registering new adapter (cx88[0]).
on boot I also get this
[ 16.018855] ALI15X3: IDE controller at PCI slot 0000:00:0e.0
[ 16.018884] ALI15X3: chipset revision 199
[ 16.018886] ALI15X3: not 100% native mode: will probe irqs later
[ 24.536230] ali1563: SMBus control = 0403
[ 24.536271] ali1563_probe: Returning 0
[ 24.574683] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 24.574687] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[ 24.587759] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 24.587810] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted
could this be affecting the card?
any help would be great or its bye bye board