Hi ,

My logs are overflowing with errors associated with my DLink DGE-530T NIC.

These errors are repeating every second and it is having an impact on performance.
The card seems to work fine in every respect except for the errors in the logs.

I am running Slackware 10.2 with kernel 2.6.13.

Does anyone have any suggestions how to clear this error?

Thanks

Syslog Error Output

Dec 25 04:40:09 vannah kernel: eth0: Adapter failed.
Dec 25 04:40:09 vannah kernel: Class: Hardware failure
Dec 25 04:40:09 vannah kernel: Nr: 0x264
Dec 25 04:40:09 vannah kernel: Msg: unexpected IRQ Status error


LSPCI Output

00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:09.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 11)
00:0a.0 SCSI storage controller: Future Domain Corp. TMC-18C30 [36C70]
00:0b.0 RAID bus controller: Promise Technology, Inc. PDC20571 (FastTrak TX2200) (rev 02)
00:0c.0 VGA compatible controller: Trident Microsystems TGUI 9660/938x/968x (rev d3)

DMESG

ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
scsi2: <fdomain> No BIOS; using scsi id 7
scsi2: <fdomain> TMC-36C70 (PCI bus) chip at 0x7000 irq 5
scsi2 : Future Domain 16-bit SCSI Driver Version 5.51
Vendor: ARCHIVE Model: Python 04106-XXX Rev: 7600
Type: Sequential-Access ANSI SCSI revision: 02
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.0.29
Copyright(c) 2004-2005 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.002.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.0.14 (May 2, 2005)
libata version 1.12 loaded.
sata_promise version 1.02
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12