LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Intel D845GLLY + Multiple Intel Pro 100 NICs + kernel 2.6.x = NICs don't work (http://www.linuxquestions.org/questions/linux-hardware-18/intel-d845glly-multiple-intel-pro-100-nics-kernel-2-6-x-%3D-nics-dont-work-286276/)

egable 02-04-2005 03:30 PM

Intel D845GLLY + Multiple Intel Pro 100 NICs + kernel 2.6.x = NICs don't work
 
I have an Intel D845GLLY motherboard. It has an on-board Intel Pro NIC. I also put in 3 half-height Intel Pro 100 PCI NICs. When I use the default 2.4.26 kernel that comes with Slackware 10, everything works fine. But when I move to a 2.6 kernel (2.6.8.1, 2.6.10) the networking stops functioning. If I pull out the PCI NICs, the onboard NIC works fine under the newer kernels. If I put in 1 PCI NIC, that one and the onboard NIC work fine in the newer kernels. If I put in Second PCI NIC, they stop working.

I have tried going into the BIOS and setting a different IRQ for each PCI slot, but that did not solve the problem. Does anyone have any other suggestions?

Thanks.


All times are GMT -5. The time now is 02:32 AM.