LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Intel Corp. 82852/855GM Integrated Graphics Device (http://www.linuxquestions.org/questions/linux-hardware-18/intel-corp-82852-855gm-integrated-graphics-device-302286/)

bioagentice 03-16-2005 09:28 AM

Intel Corp. 82852/855GM Integrated Graphics Device
 
My laptop has this card in it, and the display runs like a dream, i had a bit of trouble getting the X server to work with Slackware, but after running xorgconfig, i have had no problems since... that is of course (there is always a but) the problem with my accelorator. When i type in dmesg, i get an error about my chipset.

:
:intelfb: Acceleration is not supported for the Intel(R) 852GM chipset.
:

Do any of the group know as we, know where i can find a tar ball that will allow me to have this supported, or tell me how to edit the appropriate file to get this to work, i much appreciate the help, you guys have gotten me to where i am today, please dont stop now... hehe.

Thanx

mad_ady 03-16-2005 09:46 AM

as I see it, intelfb is for the framebuffer support (the one you use in console mode). I don't see why you want acceleration for your graphics in console mode. As far as I know, X uses different drivers, and you may have acceleration with those (for your X applications).

see /var/log/XFree86.0.log to find out if you have acceleration in X.

bioagentice 03-16-2005 09:59 AM

My Xorg.0.log file, i am using slackware



_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.26 i686 [ELF]
Current Operating System: Linux darkstar 2.4.26 #6 Mon Jun 14 19:07:27 PDT 2004 i686
Build Date: 05 June 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 16 07:16:45 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** Intel i810 (generic) [i810]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/cyrillic/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000050, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 1028,017f rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 1028,017f rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 1028,017f rev 02 class 08,80,00 hdr 80
(II) PCI: 00:02:0: chip 8086,3582 card 1028,017f rev 02 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3582 card 1028,017f rev 02 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,017f rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,017f rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,017f rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,017f rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1028,017f rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,017f rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 14f1,5422 rev 01 class 07,03,00 hdr 00
(II) PCI: 02:01:0: chip 14e4,4401 card 1028,017f rev 01 class 02,00,00 hdr 00
(II) PCI: 02:02:0: chip 14e4,4324 card 1028,0003 rev 03 class 02,80,00 hdr 00
(II) PCI: 02:04:0: chip 104c,ac56 card 4000,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xfdffffff (0x6000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:4:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corp. 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/27, 0xf6f80000/19, I/O @ 0xc000/3
(--) PCI: (0:2:1) Intel Corp. 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe0000000/27, 0xf6f00000/19
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset 852GM/855GM found
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 832 kB
(II) I810(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 852GM
(--) I810(0): Chipset: "852GM/855GM"
(--) I810(0): Linear framebuffer at 0xE8000000
(--) I810(0): IO registers at addr 0xF6F80000
(II) I810(0): detected 892 kB stolen memory.
(II) I810(0): I830CheckAvailableMemory: 448508 kB available
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 892 kByte
(==) I810(0): VideoRAM: 32768 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(--) I810(0): Maximum frambuffer space: 32616 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): 2 display pipes available.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (720,400)
(II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,2057)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2057)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2057)
(II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,2057)
(II) I810(0): Size of device LFP (local flat panel) is 1024 x 768
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1024 x 768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: QDS Model: 12 Serial#: 0
(II) I810(0): Year: 2004 Week: 0
(II) I810(0): EDID Version: 1.3
(II) I810(0): Digital Display Input
(II) I810(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) I810(0): Gamma: 2.20
(II) I810(0): No DPMS capabilities specified; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.579 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) I810(0): blueX: 0.154 blueY: 0.154 whiteX: 0.312 whiteY: 0.328
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) I810(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) I810(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) I810(0): Y6185
(II) I810(0): ȸxP
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
(II) I810(0): Will use BIOS call 0x5f64 to enable displays.
(--) I810(0): Maximum space available for video modes: 12288 kByte

(WW) I810(0): config file hsync range 31.5-48.5kHz not within DDC hsync ranges.
(WW) I810(0): config file vrefresh range 50-70Hz not within DDC vrefresh ranges.
(II) I810(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) I810(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
(II) I810(0): Not using mode "1280x1024" (no mode of this name)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(**) I810(0): *Built-in mode "800x600"
(**) I810(0): *Built-in mode "640x480"
(--) I810(0): Display dimensions: (300, 230) mm
(--) I810(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) I810(0): VBE Restore workaround: enabled.
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 1 0 0xf6f80000 - 0xf6ffffff (0x80000) MS[B]
[1] 1 0 0xe8000000 - 0xefffffff (0x8000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfcffc000 - 0xfcffdfff (0x2000) MX[B]
[8] -1 0 0xfcffe000 - 0xfcffffff (0x2000) MX[B]
[9] -1 0 0xf6eff400 - 0xf6eff4ff (0x100) MX[B]
[10] -1 0 0xf6eff800 - 0xf6eff9ff (0x200) MX[B]
[11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[12] -1 0 0xf6effc00 - 0xf6efffff (0x400) MX[B]
[13] -1 0 0xf6f00000 - 0xf6f7ffff (0x80000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0xf6f80000 - 0xf6ffffff (0x80000) MX[B](B)
[16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[17] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] 1 0 0x0000c000 - 0x0000c007 (0x8) IS[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000c080 - 0x0000c0ff (0x80) IX[B]
[24] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[25] -1 0 0x0000cc40 - 0x0000cc7f (0x40) IX[B]
[26] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[27] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[28] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[29] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[32] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[33] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[B]
[34] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[35] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B](B)
[36] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 1 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 832 kB
(II) I810(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) I810(0): Default visual is TrueColor
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 512 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 5120 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000 (0x1a76f000)
(II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffe000 (0x1a76c000).
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000
(II) I810(0): Updated framebuffer allocation size from 5120 to 8192 kByte
(II) I810(0): Updated pixmap cache from 512 scanlines to 1280 scanlines
(II) I810(0): 0x837b24c: Memory at offset 0x00020000, size 8192 kBytes
(II) I810(0): 0x837b26c: Memory at offset 0x07fff000, size 4 kBytes
(II) I810(0): 0x837b290: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x837b2c0: Memory at offset 0x07fee000, size 64 kBytes
(II) I810(0): 0x837b2e0: Memory at offset 0x07ffe000, size 4 kBytes
(==) I810(0): Write-combining range (0xe8000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x000df000 (pgoffset 223)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07fee000 (pgoffset 32750)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffe000 (pgoffset 32766)
(II) I810(0): Display plane A is disabled.
(II) I810(0): Display plane B is enabled.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 760 Mbyte/s, pipe bandwidths are 252 Mbyte/s, 0 Mbyte/s
(II) I810(0): LFP compensation mode: 0x6
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(II) I810(0): direct rendering: Failed
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 8

DAChristen29 03-23-2005 04:16 PM

intel has a driver for this card on their website, i cant provide a direct link, but its easy to find.

also, i have the same chipset in a different laptop, and i couldnt get to 1024x768. i have to use a 3rd party X server, www.xig.com. it works very well, but if you dont need it, why try it?

eeades 03-24-2005 06:32 AM

If you want 3D accel under X, use the driver to i810 in xorg.conf, and uncomment the DRI line near the top. Works all the time for me under Slack 10 and 10.1.

Eric


All times are GMT -5. The time now is 12:35 PM.