intel 945gm graphics controller.. only vesa works .5 times
 

anyone run into an issue installing FC4 on Dells D820 with Intel 945GM graphics controller?

upon boot of laptop i get a error - x server wont' start unless I run x configuration programe - I run the x configuration programe and change the monitor to whatever it seems to not make a difference. I leave the video card on VESA (generic) and Gnome (x-window) will start and work fine.. but then I reboot and the same problem happens again. I have been on google since 8am and can't find a fix to work for me. any ideas? see below for my xorg.0.log erros - if you made this work by tweaking your xorg.conf please post it. Many thanks!

X Window System Version 6.8.2
2.6.11-1.1369_FC4smp

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) VESA(0): Bad V_BIO
S checksum
(WW) VESA(0): config file hsync range 31.5-37.9kHz not within DDC hsync ranges.
(WW) VESA(0): config file vrefresh range 50-70Hz not within DDC vrefresh ranges.
(WW) VESA(0): Bad V_BIOS checksum

here is lspci

[root@Vegas sbin]# lspci
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation Mobile I/O Controller Hub LPC (rev 01)
00:1f.2 IDE interface: Intel Corporation Mobile I/O Controller Hub SATA cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
03:01.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7135 (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
[root@Vegas sbin]#

if you ever have thiss issue upgrade to the most recent xorg with yum