LinuxQuestions.org
View the Most Wanted LQ Wiki articles.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 01-23-2008, 02:54 AM   #1
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Rep: Reputation: 39
Question Intel 82801G sound doesnt work in ubuntu 7.10


i got a new MoBo and enthusiastically loaded Ubuntu 7.10 amd64 on the system, i've now discovered that the sound doesn't work, the MoBo came with a CD with linux drivers on it, i went to install them but when i restarted i couldn't access a GUI because of libasound2 or something like that, lspci shows
Code:
lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:01.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
02:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)
i don't think my graphics currently support openGL or 3d rendering either, any help at all would be most welcome
 
Old 01-23-2008, 02:59 AM   #2
Drakeo
Senior Member
 
Registered: Jan 2008
Location: Urbana IL
Distribution: Slackware, Slacko,
Posts: 2,557
Blog Entries: 3

Rep: Reputation: 215Reputation: 215Reputation: 215
what is you dmesg out put
 
Old 01-23-2008, 05:05 AM   #3
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
here it is,
Code:
[    0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f7ae000 - 000000007f7e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB030 checksum 0
[    0.000000] ACPI: RSDP 000FB030, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 7F7A0000, 003C (r1    7000720 MSFT       97)
[    0.000000] ACPI: FACP 7F7A0200, 0084 (r2 A_M_I_ OEMFACP   7000720 MSFT       97)
[    0.000000] ACPI: DSDT 7F7A05C0, 682B (r1  A0798 A0798000        0 INTL 20051117)
[    0.000000] ACPI: FACS 7F7AE000, 0040
[    0.000000] ACPI: APIC 7F7A0390, 006C (r1 A_M_I_ OEMAPIC   7000720 MSFT       97)
[    0.000000] ACPI: MCFG 7F7A0400, 003C (r1 A_M_I_ OEMMCFG   7000720 MSFT       97)
[    0.000000] ACPI: SLIC 7F7A0440, 0176 (r1    7000720 MSFT       97)
[    0.000000] ACPI: OEMB 7F7AE040, 0080 (r1 A_M_I_ AMI_OEM   7000720 MSFT       97)
[    0.000000] ACPI: HPET 7F7A6DF0, 0038 (r1 A_M_I_ OEMHPET   7000720 MSFT       97)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007f7a0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000007f7a0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   522144
[    0.000000] On node 0 totalpages: 522047
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1125 pages reserved
[    0.000000]   DMA zone: 2818 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7082 pages used for memmap
[    0.000000]   DMA32 zone: 510966 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 513784
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   67.881548] time.c: Detected 2199.971 MHz processor.
[   67.882647] Console: colour VGA+ 80x25
[   67.882663] Checking aperture...
[   67.882672] Calgary: detecting Calgary via BIOS EBDA area
[   67.882673] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   67.905445] Memory: 2047160k/2088576k available (2274k kernel code, 41028k reserved, 1181k data, 296k init)
[   67.905488] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[   67.983990] Calibrating delay using timer specific routine.. 4403.14 BogoMIPS (lpj=8806285)
[   67.984021] Security Framework v1.0.0 initialized
[   67.984028] SELinux:  Disabled at boot.
[   67.984203] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   67.985540] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   67.986193] Mount-cache hash table entries: 256
[   67.986337] CPU: L1 I cache: 32K, L1 D cache: 32K
[   67.986340] CPU: L2 cache: 2048K
[   67.986342] CPU 0/0 -> Node 0
[   67.986344] using mwait in idle threads.
[   67.986346] CPU: Physical Processor ID: 0
[   67.986347] CPU: Processor Core ID: 0
[   67.986353] CPU0: Thermal monitoring enabled (TM2)
[   67.986363] SMP alternatives: switching to UP code
[   67.986621] Early unpacking initramfs... done
[   68.304436] ACPI: Core revision 20070126
[   68.304483] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   68.358161] Using local APIC timer interrupts.
[   68.403574] result 12499832
[   68.403576] Detected 12.499 MHz APIC timer.
[   68.407621] SMP alternatives: switching to SMP code
[   68.407713] Booting processor 1/2 APIC 0x1
[   68.417978] Initializing CPU#1
[   68.495482] Calibrating delay using timer specific routine.. 4400.00 BogoMIPS (lpj=8800018)
[   68.495488] CPU: L1 I cache: 32K, L1 D cache: 32K
[   68.495490] CPU: L2 cache: 2048K
[   68.495492] CPU 1/1 -> Node 0
[   68.495494] CPU: Physical Processor ID: 0
[   68.495495] CPU: Processor Core ID: 1
[   68.495500] CPU1: Thermal monitoring enabled (TM2)
[   68.495778] Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
[   68.495839] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   68.519473] Brought up 2 CPUs
[   68.556053] migration_cost=13
[   68.556222] NET: Registered protocol family 16
[   68.556296] ACPI: bus type pci registered
[   68.556302] PCI: Using configuration type 1
[   68.558727] ACPI: EC: Look up EC in DSDT
[   68.562847] ACPI: Interpreter enabled
[   68.562850] ACPI: (supports S0 S1 S3 S4 S5)
[   68.562866] ACPI: Using IOAPIC for interrupt routing
[   68.569523] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   68.569535] PCI: Probing PCI hardware (bus 00)
[   68.570006] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   68.570009] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   68.570438] PCI: Transparent bridge - 0000:00:1e.0
[   68.570480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   68.570606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   68.570694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   68.570767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   68.572679] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   68.572783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   68.572889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   68.572991] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   68.573092] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   68.573194] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   68.573295] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   68.573397] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   68.573480] Linux Plug and Play Support v0.97 (c) Adam Belay
[   68.573489] pnp: PnP ACPI init
[   68.573496] ACPI: bus type pnp registered
[   68.577143] pnp: PnP ACPI: found 18 devices
[   68.577145] ACPI: ACPI bus type pnp unregistered
[   68.577197] PCI: Using ACPI for IRQ routing
[   68.577200] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   68.577270] NET: Registered protocol family 8
[   68.577271] NET: Registered protocol family 20
[   68.577285] PCI-GART: No AMD northbridge found.
[   68.577289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   68.577292] hpet0: 3 64-bit timers, 14318180 Hz
[   68.578336] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   68.578344] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[   68.578348] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   68.578350] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[   68.578353] pnp: 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[   68.578355] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   68.578360] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   68.578362] pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[   68.578367] pnp: 00:0f: iomem range 0xffc00000-0xfff7ffff has been reserved
[   68.578370] pnp: 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
[   68.578374] pnp: 00:11: iomem range 0x0-0x9ffff could not be reserved
[   68.578376] pnp: 00:11: iomem range 0xc0000-0xdffff has been reserved
[   68.578379] pnp: 00:11: iomem range 0xe0000-0xfffff could not be reserved
[   68.578381] pnp: 00:11: iomem range 0x100000-0x7f7fffff could not be reserved
[   68.578626] PCI: Bridge: 0000:00:1c.0
[   68.578630]   IO window: e000-efff
[   68.578633]   MEM window: disabled.
[   68.578636]   PREFETCH window: disabled.
[   68.578640] PCI: Bridge: 0000:00:1c.1
[   68.578643]   IO window: d000-dfff
[   68.578647]   MEM window: dff00000-dfffffff
[   68.578650]   PREFETCH window: disabled.
[   68.578654] PCI: Bridge: 0000:00:1e.0
[   68.578656]   IO window: c000-cfff
[   68.578660]   MEM window: dfe00000-dfefffff
[   68.578663]   PREFETCH window: disabled.
[   68.578683] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   68.578688] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   68.578703] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   68.578707] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   68.578716] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   68.578725] NET: Registered protocol family 2
[   68.579402] Time: tsc clocksource has been installed.
[   68.615577] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   68.616224] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[   68.620114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   68.620830] TCP: Hash tables configured (established 262144 bind 65536)
[   68.620833] TCP reno registered
[   68.635666] checking if image is initramfs... it is
[   69.263886] Freeing initrd memory: 7706k freed
[   69.267918] audit: initializing netlink socket (disabled)
[   69.267938] audit(1201122719.320:1): initialized
[   69.269615] VFS: Disk quotas dquot_6.5.1
[   69.269656] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   69.269732] io scheduler noop registered
[   69.269734] io scheduler anticipatory registered
[   69.269735] io scheduler deadline registered
[   69.269812] io scheduler cfq registered (default)
[   69.269826] Boot video device is 0000:00:02.0
[   69.270992] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   69.271029] assign_interrupt_mode Found MSI capability
[   69.271031] Allocate Port Service[0000:00:1c.0:pcie00]
[   69.271064] Allocate Port Service[0000:00:1c.0:pcie02]
[   69.271135] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   69.271169] assign_interrupt_mode Found MSI capability
[   69.271171] Allocate Port Service[0000:00:1c.1:pcie00]
[   69.288036] Real Time Clock Driver v1.12ac
[   69.288212] hpet_resources: 0xfed00000 is busy
[   69.288247] Linux agpgart interface v0.102 (c) Dave Jones
[   69.288249] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   69.288344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   69.288877] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   69.289400] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   69.289514] input: Macintosh mouse button emulation as /class/input/input0
[   69.289576] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   69.289578] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   69.292245] serio: i8042 KBD port at 0x60,0x64 irq 1
[   69.292249] serio: i8042 AUX port at 0x60,0x64 irq 12
[   69.292384] mice: PS/2 mouse device common for all mice
[   69.292504] TCP cubic registered
[   69.292555] NET: Registered protocol family 1
[   69.292711] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   69.292718] Freeing unused kernel memory: 296k freed
[   69.311151] input: AT Translated Set 2 keyboard as /class/input/input1
[   70.430495] AppArmor: AppArmor initialized<5>audit(1201122720.484:2):  type=1505 info="AppArmor initialized" pid=1229
[   70.435487] fuse init (API version 7.8)
[   70.439218] Failure registering capabilities with primary security module.
[   70.467356] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  3B, should be 2E [20070126]
[   70.467363] ACPI: SSDT 7F7AE0C0, 0214 (r1    AMI   CPU1PM        1 INTL 20051117)
[   70.467557] ACPI: Processor [CPU1] (supports 8 throttling states)
[   70.467696] ACPI: SSDT 7F7AE2E0, 0143 (r1    AMI   CPU2PM        1 INTL 20051117)
[   70.467860] ACPI: Processor [CPU2] (supports 8 throttling states)
[   70.467869] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   70.467877] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   70.791799] usbcore: registered new interface driver usbfs
[   70.791822] usbcore: registered new interface driver hub
[   70.791841] usbcore: registered new device driver usb
[   70.814791] USB Universal Host Controller Interface driver v3.0
[   70.814903] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   70.814913] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   70.814917] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   70.815046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   70.815073] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[   70.815174] usb usb1: configuration #1 chosen from 1 choice
[   70.815193] hub 1-0:1.0: USB hub found
[   70.815199] hub 1-0:1.0: 2 ports detected
[   70.827318] SCSI subsystem initialized
[   70.851289] libata version 2.21 loaded.
[   70.854807] Floppy drive(s): fd0 is 1.44M
[   70.881043] FDC 0 is a post-1991 82077
[   70.921276] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   70.921710] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   70.921716] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   70.921763] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   70.921799] ehci_hcd 0000:00:1d.7: debug port 1
[   70.921805] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   70.921812] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdfdffc00
[   70.925703] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   70.925778] usb usb2: configuration #1 chosen from 1 choice
[   70.925799] hub 2-0:1.0: USB hub found
[   70.925804] hub 2-0:1.0: 8 ports detected
[   71.030938] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[   71.030948] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   71.030951] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   71.031073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   71.031097] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[   71.031391] usb usb3: configuration #1 chosen from 1 choice
[   71.031522] hub 3-0:1.0: USB hub found
[   71.031526] hub 3-0:1.0: 2 ports detected
[   71.133348] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   71.133363] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   71.133368] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   71.133396] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   71.133420] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[   71.133497] usb usb4: configuration #1 chosen from 1 choice
[   71.133517] hub 4-0:1.0: USB hub found
[   71.133521] hub 4-0:1.0: 2 ports detected
[   71.237755] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[   71.237765] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   71.237770] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   71.237795] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   71.237829] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[   71.237901] usb usb5: configuration #1 chosen from 1 choice
[   71.237919] hub 5-0:1.0: USB hub found
[   71.237923] hub 5-0:1.0: 2 ports detected
[   71.345273] ata_piix 0000:00:1f.1: version 2.11
[   71.345290] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[   71.345321] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   71.345422] scsi0 : ata_piix
[   71.345458] scsi1 : ata_piix
[   71.345545] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
[   71.345548] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
[   71.695411] usb 4-1: new low speed USB device using uhci_hcd and address 2
[   71.706511] ata1.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
[   71.706516] ata1.00: 312581808 sectors, multi 16: LBA48 
[   71.706523] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66
[   71.772997] ata1.00: configured for UDMA/100
[   71.878823] usb 4-1: configuration #1 chosen from 1 choice
[   71.944743] ata1.01: configured for UDMA/66
[   72.112046] scsi 0:0:0:0: Direct-Access     ATA      ST3160815A       3.AA PQ: 0 ANSI: 5
[   72.113362] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5
[   72.113434] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   72.113467] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[   72.113502] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   72.113558] scsi2 : ata_piix
[   72.113607] scsi3 : ata_piix
[   72.113685] ata3: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001b402 bmdma 0x000000000001a400 irq 23
[   72.113688] ata4: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001a802 bmdma 0x000000000001a408 irq 23
[   72.129168] usb 4-2: new full speed USB device using uhci_hcd and address 3
[   72.341361] usb 4-2: configuration #1 chosen from 1 choice
[   72.344502] usbcore: registered new interface driver hiddev
[   72.357449] input: A4Tech USB Optical Mouse as /class/input/input2
[   72.357470] input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.2-1
[   72.357484] usbcore: registered new interface driver usbhid
[   72.357487] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   72.454327] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   72.454337] sd 0:0:0:0: [sda] Write Protect is off
[   72.454339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   72.454350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   72.454388] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   72.454395] sd 0:0:0:0: [sda] Write Protect is off
[   72.454396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 
Old 01-23-2008, 05:07 AM   #4
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
Code:
[   72.454407] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   72.454411]  sda: sda1 sda2 < sda5 > sda3
[   72.502631] sd 0:0:0:0: [sda] Attached SCSI disk
[   72.505259] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   72.505275] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   72.506006] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   72.506010] Uniform CD-ROM driver Revision: 3.20
[   72.506155] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   85.311731] kjournald starting.  Commit interval 5 seconds
[   85.311739] EXT3-fs: mounted filesystem with ordered data mode.
[   85.747622] ISO 9660 Extensions: Microsoft Joliet Level 3
[   85.788642] ISO 9660 Extensions: RRIP_1991A
[   85.987071] Registering unionfs 1.4
[   85.987074] unionfs: debugging is not enabled
[   85.993535] loop: module loaded
[   86.210189] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[  135.237399] agpgart: Detected an Intel 945G Chipset.
[  135.238237] agpgart: Detected 7932K stolen memory.
[  135.252651] agpgart: AGP aperture is 256M @ 0xe0000000
[  135.730071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  135.979754] iTCO_vendor_support: vendor-support=0
[  135.980527] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[  135.980592] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[  135.980627] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  136.084330] intel_rng: FWH not detected
[  136.204199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  136.630644] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[  136.689016] parport_pc 00:07: reported by Plug and Play ACPI
[  136.689128] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[  136.692003] input: PC Speaker as /class/input/input3
[  136.770050] Attansic(R) L2 Ethernet Network Driver - version 1.0.40.2
[  136.770053] Copyright (c) 2006 Attansic Corporation.
[  136.925901] Bluetooth: Core ver 2.11
[  136.925941] NET: Registered protocol family 31
[  136.925942] Bluetooth: HCI device and connection manager initialized
[  136.925945] Bluetooth: HCI socket layer initialized
[  136.927338] Bluetooth: HCI USB driver ver 2.9
[  136.929517] usbcore: registered new interface driver hci_usb
[  137.118040] ieee80211_init: failed to initialize WME (err=-17)
[  137.265764] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[  137.265790] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[  137.265810] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[  137.265845] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[  137.336061] wmaster0: Selected rate control algorithm 'simple'
[  137.588831] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  137.588844] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  137.793336] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[  137.793841] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  137.992127] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[  141.048903] No dock devices found.
[  141.085885] input: Power Button (FF) as /class/input/input4
[  141.085902] ACPI: Power Button (FF) [PWRF]
[  141.085997] input: Power Button (CM) as /class/input/input5
[  141.086009] ACPI: Power Button (CM) [PWRB]
[  145.348689] lp0: using parport0 (interrupt-driven).
[  146.023365] ppdev: user-space parallel port driver
[  149.064492] Failure registering capabilities with primary security module.
[  149.997577] Bluetooth: L2CAP ver 2.8
[  149.997583] Bluetooth: L2CAP socket layer initialized
[  150.431582] Bluetooth: RFCOMM socket layer initialized
[  150.431802] Bluetooth: RFCOMM TTY layer initialized
[  150.431806] Bluetooth: RFCOMM ver 1.8
[  158.885787] [drm] Initialized drm 1.1.0 20060810
[  158.931803] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[  158.932044] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  364.629985] NET: Registered protocol family 17
[  365.484142] wlan0: Initial auth_alg=0
[  365.484150] wlan0: authenticate with AP 00:17:9a:d8:b0:6a
[  365.485345] wlan0: RX authentication from 00:17:9a:d8:b0:6a (alg=0 transaction=2 status=0)
[  365.485352] wlan0: authenticated
[  365.485355] wlan0: associate with AP 00:17:9a:d8:b0:6a
[  365.487395] wlan0: RX AssocResp from 00:17:9a:d8:b0:6a (capab=0x461 status=0 aid=1)
[  365.487399] wlan0: associated
[  408.738535] wlan0: disassociate(reason=3)
[  446.249046] wlan0: Initial auth_alg=0
[  446.249053] wlan0: authenticate with AP 00:17:9a:d8:b0:6a
[  446.250247] wlan0: RX authentication from 00:17:9a:d8:b0:6a (alg=0 transaction=2 status=0)
[  446.250253] wlan0: authenticated
[  446.250257] wlan0: associate with AP 00:17:9a:d8:b0:6a
[  446.252060] wlan0: RX AssocResp from 00:17:9a:d8:b0:6a (capab=0x461 status=0 aid=1)
[  446.252065] wlan0: associated
[  452.003283] NET: Registered protocol family 10
[  452.003433] lo: Disabled Privacy Extensions
[  452.003620] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  452.156726] wlan0: duplicate address detected!
[  555.181861] JFS: nTxBlock = 8192, nTxLock = 65536
[  555.388324] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  555.391786] SGI XFS Quota Management subsystem
[  555.661194] program parted_devices is using a deprecated SCSI ioctl, please convert it to SG_IO
[  714.112985] NTFS driver 2.1.28 [Flags: R/O MODULE].
[  714.200530] QNX4 filesystem 0.2.3 registered.
[  714.268191] cramfs: wrong magic
[  714.513787] cramfs: wrong magic
[  714.540385] attempt to access beyond end of device
[  714.540390] sda2: rw=0, want=4, limit=2
[  714.540393] EXT3-fs: unable to read superblock
[  714.542445] FAT: bogus number of reserved sectors
[  714.542452] VFS: Can't find a valid FAT filesystem on dev sda2.
[  714.544590] attempt to access beyond end of device
[  714.544595] sda2: rw=0, want=66, limit=2
[  714.544756] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[  714.546865] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[  714.548807] attempt to access beyond end of device
[  714.548812] sda2: rw=0, want=4, limit=2
[  714.548814] EXT2-fs: unable to read superblock
[  714.550659] attempt to access beyond end of device
[  714.550664] sda2: rw=0, want=72, limit=2
[  714.550827] attempt to access beyond end of device
[  714.550830] sda2: rw=0, want=128, limit=2
[  714.552795] attempt to access beyond end of device
[  714.552799] sda2: rw=0, want=18, limit=2
[  714.552967] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[  714.553090] attempt to access beyond end of device
[  714.553092] sda2: rw=0, want=130, limit=2
[  714.553228] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[  714.553231] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[  714.555340] attempt to access beyond end of device
[  714.555344] sda2: rw=0, want=8, limit=2
[  714.555349] XFS: SB read failed
[  714.562982] FAT: bogus number of reserved sectors
[  714.562988] VFS: Can't find a valid FAT filesystem on dev sda2.
[  714.569421] attempt to access beyond end of device
[  714.569426] sda2: rw=0, want=4, limit=2
[  714.569618] MINIX-fs: unable to read superblock
[  714.576481] attempt to access beyond end of device
[  714.576485] sda2: rw=0, want=3, limit=2
[  714.576694] hfs: unable to find HFS+ superblock
[  714.579513] qnx4: wrong fsid in superblock.
[  714.581593] You didn't specify the type of your ufs filesystem
[  714.581595] 
[  714.581595] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[  714.581597] 
[  714.581597] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[  714.581997] attempt to access beyond end of device
[  714.582000] sda2: rw=0, want=18, limit=2
[  714.583979] attempt to access beyond end of device
[  714.583984] sda2: rw=0, want=3, limit=2
[  714.583987] hfs: can't find a HFS filesystem on dev sda2.
[  714.621825] cramfs: wrong magic
[  714.640151] kjournald starting.  Commit interval 5 seconds
[  714.640351] EXT3-fs: mounted filesystem with ordered data mode.
[  714.771750] cramfs: wrong magic
[  714.778206] VFS: Can't find ext3 filesystem on dev sda5.
[  714.974588] cramfs: wrong magic
[  715.254359] cramfs: wrong magic
[  715.279850] attempt to access beyond end of device
[  715.279856] sda2: rw=0, want=4, limit=2
[  715.279859] EXT3-fs: unable to read superblock
[  715.281894] FAT: bogus number of reserved sectors
[  715.281901] VFS: Can't find a valid FAT filesystem on dev sda2.
[  715.284000] attempt to access beyond end of device
[  715.284005] sda2: rw=0, want=66, limit=2
[  715.284169] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[  715.286203] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[  715.288251] attempt to access beyond end of device
[  715.288256] sda2: rw=0, want=4, limit=2
[  715.288259] EXT2-fs: unable to read superblock
[  715.290056] attempt to access beyond end of device
[  715.290060] sda2: rw=0, want=72, limit=2
[  715.290064] attempt to access beyond end of device
[  715.290066] sda2: rw=0, want=128, limit=2
[  715.291909] attempt to access beyond end of device
[  715.291913] sda2: rw=0, want=18, limit=2
[  715.292075] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[  715.292201] attempt to access beyond end of device
[  715.292203] sda2: rw=0, want=130, limit=2
[  715.292339] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[  715.292342] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[  715.294369] attempt to access beyond end of device
[  715.294372] sda2: rw=0, want=8, limit=2
[  715.294544] XFS: SB read failed
[  715.302619] FAT: bogus number of reserved sectors
[  715.302626] VFS: Can't find a valid FAT filesystem on dev sda2.
[  715.308797] attempt to access beyond end of device
[  715.308803] sda2: rw=0, want=4, limit=2
[  715.308806] MINIX-fs: unable to read superblock
[  715.310755] attempt to access beyond end of device
[  715.310760] sda2: rw=0, want=3, limit=2
[  715.310926] hfs: unable to find HFS+ superblock
[  715.312918] qnx4: wrong fsid in superblock.
[  715.315020] You didn't specify the type of your ufs filesystem
[  715.315022] 
[  715.315023] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[  715.315024] 
[  715.315025] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[  715.315038] attempt to access beyond end of device
[  715.315040] sda2: rw=0, want=18, limit=2
[  715.316802] attempt to access beyond end of device
[  715.316807] sda2: rw=0, want=3, limit=2
[  715.316810] hfs: can't find a HFS filesystem on dev sda2.
[  715.353153] cramfs: wrong magic
[  715.371479] kjournald starting.  Commit interval 5 seconds
[  715.371678] EXT3-fs: mounted filesystem with ordered data mode.
[  715.494766] cramfs: wrong magic
[  715.501221] VFS: Can't find ext3 filesystem on dev sda5.
[  719.796141] cramfs: wrong magic
[  720.036016] cramfs: wrong magic
[  720.058423] attempt to access beyond end of device
[  720.058429] sda2: rw=0, want=4, limit=2
[  720.058432] EXT3-fs: unable to read superblock
[  720.060376] FAT: bogus number of reserved sectors
[  720.060383] VFS: Can't find a valid FAT filesystem on dev sda2.
[  720.062314] attempt to access beyond end of device
[  720.062319] sda2: rw=0, want=66, limit=2
[  720.062322] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[  720.064258] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[  720.066141] attempt to access beyond end of device
[  720.066146] sda2: rw=0, want=4, limit=2
[  720.066148] EXT2-fs: unable to read superblock
[  720.067896] attempt to access beyond end of device
[  720.067901] sda2: rw=0, want=72, limit=2
[  720.067905] attempt to access beyond end of device
[  720.067907] sda2: rw=0, want=128, limit=2
[  720.069669] attempt to access beyond end of device
[  720.069674] sda2: rw=0, want=18, limit=2
[  720.069678] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[  720.069683] attempt to access beyond end of device
[  720.069685] sda2: rw=0, want=130, limit=2
[  720.069688] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[  720.069690] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[  720.071460] attempt to access beyond end of device
[  720.071464] sda2: rw=0, want=8, limit=2
[  720.071468] XFS: SB read failed
[  720.081169] FAT: bogus number of reserved sectors
[  720.081177] VFS: Can't find a valid FAT filesystem on dev sda2.
[  720.087323] attempt to access beyond end of device
[  720.087328] sda2: rw=0, want=4, limit=2
[  720.087331] MINIX-fs: unable to read superblock
[  720.089146] attempt to access beyond end of device
[  720.089151] sda2: rw=0, want=3, limit=2
[  720.089153] hfs: unable to find HFS+ superblock
[  720.091154] qnx4: wrong fsid in superblock.
[  720.093151] You didn't specify the type of your ufs filesystem
[  720.093153] 
[  720.093154] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[  720.093155] 
[  720.093156] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[  720.093578] attempt to access beyond end of device
[  720.093581] sda2: rw=0, want=18, limit=2
[  720.095558] attempt to access beyond end of device
[  720.095563] sda2: rw=0, want=3, limit=2
[  720.095567] hfs: can't find a HFS filesystem on dev sda2.
[  720.131705] cramfs: wrong magic
[  720.150030] kjournald starting.  Commit interval 5 seconds
[  720.150244] EXT3-fs: mounted filesystem with ordered data mode.
[  720.282010] cramfs: wrong magic
[  720.288730] VFS: Can't find ext3 filesystem on dev sda5.
[  720.484471] cramfs: wrong magic
[  720.749423] cramfs: wrong magic
[  720.773161] attempt to access beyond end of device
[  720.773167] sda2: rw=0, want=4, limit=2
[  720.773170] EXT3-fs: unable to read superblock
[  720.775187] FAT: bogus number of reserved sectors
[  720.775194] VFS: Can't find a valid FAT filesystem on dev sda2.
[  720.777284] attempt to access beyond end of device
[  720.777289] sda2: rw=0, want=66, limit=2
[  720.777453] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[  720.779536] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[  720.781444] attempt to access beyond end of device
[  720.781449] sda2: rw=0, want=4, limit=2
[  720.781451] EXT2-fs: unable to read superblock
[  720.783277] attempt to access beyond end of device
[  720.783282] sda2: rw=0, want=72, limit=2
[  720.783447] attempt to access beyond end of device
[  720.783449] sda2: rw=0, want=128, limit=2
[  720.785470] attempt to access beyond end of device
[  720.785474] sda2: rw=0, want=18, limit=2
[  720.785639] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[  720.785760] attempt to access beyond end of device
[  720.785763] sda2: rw=0, want=130, limit=2
[  720.785898] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[  720.785901] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[  720.787978] attempt to access beyond end of device
[  720.787983] sda2: rw=0, want=8, limit=2
[  720.787987] XFS: SB read failed
[  720.795878] FAT: bogus number of reserved sectors
[  720.795884] VFS: Can't find a valid FAT filesystem on dev sda2.
[  720.802003] attempt to access beyond end of device
[  720.802008] sda2: rw=0, want=4, limit=2
[  720.802197] MINIX-fs: unable to read superblock
[  720.804110] attempt to access beyond end of device
[  720.804116] sda2: rw=0, want=3, limit=2
[  720.804118] hfs: unable to find HFS+ superblock
[  720.806121] qnx4: wrong fsid in superblock.
[  720.808026] You didn't specify the type of your ufs filesystem
[  720.808028] 
[  720.808029] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[  720.808030] 
[  720.808031] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[  720.808433] attempt to access beyond end of device
[  720.808436] sda2: rw=0, want=18, limit=2
[  720.810357] attempt to access beyond end of device
[  720.810362] sda2: rw=0, want=3, limit=2
[  720.810523] hfs: can't find a HFS filesystem on dev sda2.
[  720.846408] cramfs: wrong magic
[  720.864735] kjournald starting.  Commit interval 5 seconds
[  720.864933] EXT3-fs: mounted filesystem with ordered data mode.
[  720.996334] cramfs: wrong magic
[  721.002790] VFS: Can't find ext3 filesystem on dev sda5.
[  768.885432] intel_rng: FWH not detected
[  794.379853] kjournald starting.  Commit interval 5 seconds
[  794.385000] EXT3 FS on sda3, internal journal
[  794.385139] EXT3-fs: mounted filesystem with ordered data mode.
[ 2251.710379] cramfs: wrong magic
[ 2251.734554] attempt to access beyond end of device
[ 2251.734562] sda2: rw=0, want=4, limit=2
[ 2251.734567] EXT3-fs: unable to read superblock
[ 2251.737982] FAT: bogus number of reserved sectors
[ 2251.737989] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2251.741246] attempt to access beyond end of device
[ 2251.741254] sda2: rw=0, want=66, limit=2
[ 2251.741540] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[ 2251.745132] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[ 2251.748440] attempt to access beyond end of device
[ 2251.748447] sda2: rw=0, want=4, limit=2
[ 2251.748725] EXT2-fs: unable to read superblock
[ 2251.752145] attempt to access beyond end of device
[ 2251.752152] sda2: rw=0, want=72, limit=2
[ 2251.752159] attempt to access beyond end of device
[ 2251.752163] sda2: rw=0, want=128, limit=2
[ 2251.755500] attempt to access beyond end of device
[ 2251.755508] sda2: rw=0, want=18, limit=2
[ 2251.755787] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[ 2251.756012] attempt to access beyond end of device
[ 2251.756017] sda2: rw=0, want=130, limit=2
[ 2251.756266] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[ 2251.756271] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[ 2251.759858] attempt to access beyond end of device
[ 2251.759862] sda2: rw=0, want=8, limit=2
[ 2251.759866] XFS: SB read failed
[ 2251.764143] FAT: bogus number of reserved sectors
[ 2251.764147] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2251.770342] attempt to access beyond end of device
[ 2251.770348] sda2: rw=0, want=4, limit=2
[ 2251.770350] MINIX-fs: unable to read superblock
[ 2251.772198] attempt to access beyond end of device
[ 2251.772202] sda2: rw=0, want=3, limit=2
[ 2251.772205] hfs: unable to find HFS+ superblock
[ 2251.774215] qnx4: wrong fsid in superblock.
[ 2251.776335] You didn't specify the type of your ufs filesystem
[ 2251.776337] 
[ 2251.776337] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[ 2251.776339] 
[ 2251.776340] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2251.776748] attempt to access beyond end of device
[ 2251.776751] sda2: rw=0, want=18, limit=2
[ 2251.778750] attempt to access beyond end of device
[ 2251.778756] sda2: rw=0, want=3, limit=2
[ 2251.778759] hfs: can't find a HFS filesystem on dev sda2.
[ 2252.821553] cramfs: wrong magic
[ 2252.846760] attempt to access beyond end of device
[ 2252.846765] sda2: rw=0, want=4, limit=2
[ 2252.846768] EXT3-fs: unable to read superblock
[ 2252.848788] FAT: bogus number of reserved sectors
[ 2252.848795] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2252.850715] attempt to access beyond end of device
[ 2252.850720] sda2: rw=0, want=66, limit=2
[ 2252.850723] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[ 2252.852659] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[ 2252.854623] attempt to access beyond end of device
[ 2252.854628] sda2: rw=0, want=4, limit=2
[ 2252.854793] EXT2-fs: unable to read superblock
[ 2252.856705] attempt to access beyond end of device
[ 2252.856710] sda2: rw=0, want=72, limit=2
[ 2252.856714] attempt to access beyond end of device
[ 2252.856716] sda2: rw=0, want=128, limit=2
[ 2252.858508] attempt to access beyond end of device
[ 2252.858513] sda2: rw=0, want=18, limit=2
[ 2252.858518] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[ 2252.858522] attempt to access beyond end of device
[ 2252.858525] sda2: rw=0, want=130, limit=2
[ 2252.858528] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[ 2252.858530] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[ 2252.860337] attempt to access beyond end of device
[ 2252.860341] sda2: rw=0, want=8, limit=2
[ 2252.860345] XFS: SB read failed
[ 2252.862319] FAT: bogus number of reserved sectors
[ 2252.862325] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2252.868518] attempt to access beyond end of device
[ 2252.868524] sda2: rw=0, want=4, limit=2
[ 2252.868526] MINIX-fs: unable to read superblock
[ 2252.870392] attempt to access beyond end of device
[ 2252.870397] sda2: rw=0, want=3, limit=2
[ 2252.870563] hfs: unable to find HFS+ superblock
[ 2252.872599] qnx4: wrong fsid in superblock.
[ 2252.874646] You didn't specify the type of your ufs filesystem
[ 2252.874648] 
[ 2252.874649] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[ 2252.874650] 
[ 2252.874651] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2252.874663] attempt to access beyond end of device
[ 2252.874665] sda2: rw=0, want=18, limit=2
[ 2252.876449] attempt to access beyond end of device
[ 2252.876453] sda2: rw=0, want=3, limit=2
[ 2252.876457] hfs: can't find a HFS filesystem on dev sda2.
[ 2307.194497] intel_rng: FWH not detected
[ 2309.485941] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 2309.486043] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2309.594154] usbcore: registered new interface driver libusual
[ 2309.596894] Initializing USB Mass Storage driver...
[ 2309.597059] usbcore: registered new interface driver usb-storage
[ 2309.597150] USB Mass Storage support registered.
 
Old 01-23-2008, 05:07 AM   #5
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
Code:
[ 2311.507288] ide0: I/O resource 0x3F6-0x3F6 not free.
[ 2311.507292] ide0: ports already in use, skipping probe
[ 2311.507295] ide1: I/O resource 0x376-0x376 not free.
[ 2311.507297] ide1: ports already in use, skipping probe
[ 2311.614298] ide-floppy driver 0.99.newide
[ 2314.695714] intel_rng: FWH not detected
[ 2356.809684] cramfs: wrong magic
[ 2356.834587] attempt to access beyond end of device
[ 2356.834593] sda2: rw=0, want=4, limit=2
[ 2356.834596] EXT3-fs: unable to read superblock
[ 2356.836723] FAT: bogus number of reserved sectors
[ 2356.836729] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2356.838816] attempt to access beyond end of device
[ 2356.838820] sda2: rw=0, want=66, limit=2
[ 2356.838823] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
[ 2356.840880] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[ 2356.842874] attempt to access beyond end of device
[ 2356.842878] sda2: rw=0, want=4, limit=2
[ 2356.842990] EXT2-fs: unable to read superblock
[ 2356.844907] attempt to access beyond end of device
[ 2356.844911] sda2: rw=0, want=72, limit=2
[ 2356.845022] attempt to access beyond end of device
[ 2356.845025] sda2: rw=0, want=128, limit=2
[ 2356.846945] attempt to access beyond end of device
[ 2356.846950] sda2: rw=0, want=18, limit=2
[ 2356.846955] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 8, size 1024)
[ 2356.846960] attempt to access beyond end of device
[ 2356.846962] sda2: rw=0, want=130, limit=2
[ 2356.846965] ReiserFS: sda2: warning: sh-2006: read_super_block: bread failed (dev sda2, block 64, size 1024)
[ 2356.846968] ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2
[ 2356.848942] attempt to access beyond end of device
[ 2356.848945] sda2: rw=0, want=8, limit=2
[ 2356.848949] XFS: SB read failed
[ 2356.851000] FAT: bogus number of reserved sectors
[ 2356.851007] VFS: Can't find a valid FAT filesystem on dev sda2.
[ 2356.857239] attempt to access beyond end of device
[ 2356.857244] sda2: rw=0, want=4, limit=2
[ 2356.857369] MINIX-fs: unable to read superblock
[ 2356.859248] attempt to access beyond end of device
[ 2356.859253] sda2: rw=0, want=3, limit=2
[ 2356.859362] hfs: unable to find HFS+ superblock
[ 2356.861480] qnx4: wrong fsid in superblock.
[ 2356.863334] You didn't specify the type of your ufs filesystem
[ 2356.863336] 
[ 2356.863337] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
[ 2356.863338] 
[ 2356.863339] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 2356.863351] attempt to access beyond end of device
[ 2356.863353] sda2: rw=0, want=18, limit=2
[ 2356.865307] attempt to access beyond end of device
[ 2356.865313] sda2: rw=0, want=3, limit=2
[ 2356.865316] hfs: can't find a HFS filesystem on dev sda2.
i had to output it to a file it was so long
 
Old 01-23-2008, 05:08 AM   #6
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
i'm currently running off live cd*
 
Old 01-23-2008, 05:14 AM   #7
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
i've also since re-installed ubuntu so i could access the gui, i'll reboot from HDD and post the dmesg output (hopefully it shouldnt have those nasty filesystem errors :P

Last edited by Person_1873; 01-23-2008 at 05:21 AM.
 
Old 01-23-2008, 05:33 AM   #8
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
Code:
[    0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] Command line: root=UUID=ea141ad8-6181-4626-bd6a-9b806c199f46 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f7ae000 - 000000007f7e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB030 checksum 0
[    0.000000] ACPI: RSDP 000FB030, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 7F7A0000, 003C (r1    7000720 MSFT       97)
[    0.000000] ACPI: FACP 7F7A0200, 0084 (r2 A_M_I_ OEMFACP   7000720 MSFT       97)
[    0.000000] ACPI: DSDT 7F7A05C0, 682B (r1  A0798 A0798000        0 INTL 20051117)
[    0.000000] ACPI: FACS 7F7AE000, 0040
[    0.000000] ACPI: APIC 7F7A0390, 006C (r1 A_M_I_ OEMAPIC   7000720 MSFT       97)
[    0.000000] ACPI: MCFG 7F7A0400, 003C (r1 A_M_I_ OEMMCFG   7000720 MSFT       97)
[    0.000000] ACPI: SLIC 7F7A0440, 0176 (r1    7000720 MSFT       97)
[    0.000000] ACPI: OEMB 7F7AE040, 0080 (r1 A_M_I_ AMI_OEM   7000720 MSFT       97)
[    0.000000] ACPI: HPET 7F7A6DF0, 0038 (r1 A_M_I_ OEMHPET   7000720 MSFT       97)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007f7a0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 522144) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000007f7a0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   522144
[    0.000000] On node 0 totalpages: 522047
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1125 pages reserved
[    0.000000]   DMA zone: 2818 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7082 pages used for memmap
[    0.000000]   DMA32 zone: 510966 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 513784
[    0.000000] Kernel command line: root=UUID=ea141ad8-6181-4626-bd6a-9b806c199f46 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   16.139396] time.c: Detected 2199.972 MHz processor.
[   16.140491] Console: colour VGA+ 80x25
[   16.140507] Checking aperture...
[   16.140517] Calgary: detecting Calgary via BIOS EBDA area
[   16.140518] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   16.163297] Memory: 2047124k/2088576k available (2274k kernel code, 41064k reserved, 1181k data, 296k init)
[   16.163341] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[   16.241842] Calibrating delay using timer specific routine.. 4403.16 BogoMIPS (lpj=8806320)
[   16.241874] Security Framework v1.0.0 initialized
[   16.241881] SELinux:  Disabled at boot.
[   16.242062] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   16.243376] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   16.243993] Mount-cache hash table entries: 256
[   16.244134] CPU: L1 I cache: 32K, L1 D cache: 32K
[   16.244139] CPU: L2 cache: 2048K
[   16.244141] CPU 0/0 -> Node 0
[   16.244143] using mwait in idle threads.
[   16.244145] CPU: Physical Processor ID: 0
[   16.244146] CPU: Processor Core ID: 0
[   16.244152] CPU0: Thermal monitoring enabled (TM2)
[   16.244162] SMP alternatives: switching to UP code
[   16.244426] Early unpacking initramfs... done
[   16.562872] ACPI: Core revision 20070126
[   16.562919] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   16.616584] Using local APIC timer interrupts.
[   16.661997] result 12499839
[   16.661999] Detected 12.499 MHz APIC timer.
[   16.665474] SMP alternatives: switching to SMP code
[   16.665569] Booting processor 1/2 APIC 0x1
[   16.675847] Initializing CPU#1
[   16.753334] Calibrating delay using timer specific routine.. 4400.00 BogoMIPS (lpj=8800015)
[   16.753340] CPU: L1 I cache: 32K, L1 D cache: 32K
[   16.753342] CPU: L2 cache: 2048K
[   16.753344] CPU 1/1 -> Node 0
[   16.753346] CPU: Physical Processor ID: 0
[   16.753347] CPU: Processor Core ID: 1
[   16.753352] CPU1: Thermal monitoring enabled (TM2)
[   16.753630] Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
[   16.753647] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   16.777325] Brought up 2 CPUs
[   16.800883] migration_cost=12
[   16.801054] NET: Registered protocol family 16
[   16.801126] ACPI: bus type pci registered
[   16.801133] PCI: Using configuration type 1
[   16.803565] ACPI: EC: Look up EC in DSDT
[   16.807678] ACPI: Interpreter enabled
[   16.807681] ACPI: (supports S0 S1 S3 S4 S5)
[   16.807697] ACPI: Using IOAPIC for interrupt routing
[   16.814356] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   16.814368] PCI: Probing PCI hardware (bus 00)
[   16.814837] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   16.814841] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   16.815268] PCI: Transparent bridge - 0000:00:1e.0
[   16.815310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   16.815436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   16.815526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   16.815599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   16.817488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   16.817592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.817696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.817797] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.817899] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   16.818000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.818101] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.818203] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.818288] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.818300] pnp: PnP ACPI init
[   16.818306] ACPI: bus type pnp registered
[   16.821971] pnp: PnP ACPI: found 18 devices
[   16.821973] ACPI: ACPI bus type pnp unregistered
[   16.822022] PCI: Using ACPI for IRQ routing
[   16.822024] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   16.822096] NET: Registered protocol family 8
[   16.822097] NET: Registered protocol family 20
[   16.822111] PCI-GART: No AMD northbridge found.
[   16.822116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   16.822120] hpet0: 3 64-bit timers, 14318180 Hz
[   16.823164] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   16.823171] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[   16.823175] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   16.823177] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[   16.823180] pnp: 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[   16.823182] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   16.823187] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   16.823189] pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[   16.823194] pnp: 00:0f: iomem range 0xffc00000-0xfff7ffff has been reserved
[   16.823198] pnp: 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
[   16.823201] pnp: 00:11: iomem range 0x0-0x9ffff could not be reserved
[   16.823204] pnp: 00:11: iomem range 0xc0000-0xdffff has been reserved
[   16.823206] pnp: 00:11: iomem range 0xe0000-0xfffff could not be reserved
[   16.823208] pnp: 00:11: iomem range 0x100000-0x7f7fffff could not be reserved
[   16.823449] PCI: Bridge: 0000:00:1c.0
[   16.823452]   IO window: e000-efff
[   16.823456]   MEM window: disabled.
[   16.823459]   PREFETCH window: disabled.
[   16.823463] PCI: Bridge: 0000:00:1c.1
[   16.823465]   IO window: d000-dfff
[   16.823469]   MEM window: dff00000-dfffffff
[   16.823473]   PREFETCH window: disabled.
[   16.823477] PCI: Bridge: 0000:00:1e.0
[   16.823479]   IO window: c000-cfff
[   16.823483]   MEM window: dfe00000-dfefffff
[   16.823486]   PREFETCH window: disabled.
[   16.823506] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.823511] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   16.823526] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   16.823530] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   16.823539] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   16.823549] NET: Registered protocol family 2
[   16.825265] Time: tsc clocksource has been installed.
[   16.861417] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   16.862051] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[   16.865916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   16.866624] TCP: Hash tables configured (established 262144 bind 65536)
[   16.866627] TCP reno registered
[   16.881520] checking if image is initramfs... it is
[   17.511377] Freeing initrd memory: 7738k freed
[   17.515447] audit: initializing netlink socket (disabled)
[   17.515465] audit(1201127008.312:1): initialized
[   17.517177] VFS: Disk quotas dquot_6.5.1
[   17.517221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   17.517296] io scheduler noop registered
[   17.517298] io scheduler anticipatory registered
[   17.517299] io scheduler deadline registered
[   17.517375] io scheduler cfq registered (default)
[   17.517387] Boot video device is 0000:00:02.0
[   17.518547] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   17.518583] assign_interrupt_mode Found MSI capability
[   17.518586] Allocate Port Service[0000:00:1c.0:pcie00]
[   17.518616] Allocate Port Service[0000:00:1c.0:pcie02]
[   17.518685] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   17.518719] assign_interrupt_mode Found MSI capability
[   17.518720] Allocate Port Service[0000:00:1c.1:pcie00]
[   17.535536] Real Time Clock Driver v1.12ac
[   17.535704] hpet_resources: 0xfed00000 is busy
[   17.535738] Linux agpgart interface v0.102 (c) Dave Jones
[   17.535740] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   17.535836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.536366] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.536908] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   17.537018] input: Macintosh mouse button emulation as /class/input/input0
[   17.537082] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   17.537085] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   17.539752] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.539756] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.539888] mice: PS/2 mouse device common for all mice
[   17.540011] TCP cubic registered
[   17.540063] NET: Registered protocol family 1
[   17.540218] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   17.540224] Freeing unused kernel memory: 296k freed
[   17.560734] input: AT Translated Set 2 keyboard as /class/input/input1
[   18.680209] AppArmor: AppArmor initialized<5>audit(1201127009.480:2):  type=1505 info="AppArmor initialized" pid=1232
[   18.684248] fuse init (API version 7.8)
[   18.687473] Failure registering capabilities with primary security module.
[   18.724824] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  3B, should be 2E [20070126]
[   18.724831] ACPI: SSDT 7F7AE0C0, 0214 (r1    AMI   CPU1PM        1 INTL 20051117)
[   18.725024] ACPI: Processor [CPU1] (supports 8 throttling states)
[   18.725159] ACPI: SSDT 7F7AE2E0, 0143 (r1    AMI   CPU2PM        1 INTL 20051117)
[   18.725318] ACPI: Processor [CPU2] (supports 8 throttling states)
[   18.725327] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   18.725335] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   19.042452] usbcore: registered new interface driver usbfs
[   19.042480] usbcore: registered new interface driver hub
[   19.042499] usbcore: registered new device driver usb
[   19.043136] USB Universal Host Controller Interface driver v3.0
[   19.043235] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   19.043245] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   19.043248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   19.043376] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   19.043403] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[   19.043505] usb usb1: configuration #1 chosen from 1 choice
[   19.043528] hub 1-0:1.0: USB hub found
[   19.043532] hub 1-0:1.0: 2 ports detected
[   19.066801] SCSI subsystem initialized
[   19.070292] libata version 2.21 loaded.
[   19.099457] Floppy drive(s): fd0 is 1.44M
[   19.128866] FDC 0 is a post-1991 82077
[   19.150703] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[   19.150721] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   19.150724] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   19.150748] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   19.150774] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[   19.150852] usb usb2: configuration #1 chosen from 1 choice
[   19.150872] hub 2-0:1.0: USB hub found
[   19.150876] hub 2-0:1.0: 2 ports detected
[   19.254880] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   19.254892] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   19.254897] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   19.254928] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   19.254951] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[   19.255020] usb usb3: configuration #1 chosen from 1 choice
[   19.255037] hub 3-0:1.0: USB hub found
[   19.255041] hub 3-0:1.0: 2 ports detected
[   19.359010] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[   19.359017] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   19.359020] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   19.359034] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   19.359058] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[   19.359128] usb usb4: configuration #1 chosen from 1 choice
[   19.359147] hub 4-0:1.0: USB hub found
[   19.359152] hub 4-0:1.0: 2 ports detected
[   19.463906] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   19.464361] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   19.464367] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   19.464417] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   19.464452] ehci_hcd 0000:00:1d.7: debug port 1
[   19.464458] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   19.464467] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdfdffc00
[   19.468358] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   19.468466] usb usb5: configuration #1 chosen from 1 choice
[   19.468490] hub 5-0:1.0: USB hub found
[   19.468497] hub 5-0:1.0: 8 ports detected
[   19.571715] ata_piix 0000:00:1f.1: version 2.11
[   19.571747] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[   19.571783] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   19.572024] scsi0 : ata_piix
[   19.572058] scsi1 : ata_piix
[   19.572142] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
[   19.572145] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
[   19.942089] ata1.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
[   19.942095] ata1.00: 312581808 sectors, multi 16: LBA48 
[   19.942102] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66
[   20.008565] ata1.00: configured for UDMA/100
[   20.186201] ata1.01: configured for UDMA/66
[   20.352988] scsi 0:0:0:0: Direct-Access     ATA      ST3160815A       3.AA PQ: 0 ANSI: 5
[   20.354512] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5
[   20.354587] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   20.354619] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[   20.354655] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   20.354687] scsi2 : ata_piix
[   20.354721] scsi3 : ata_piix
[   20.354802] ata3: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001b402 bmdma 0x000000000001a400 irq 23
[   20.354805] ata4: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001a802 bmdma 0x000000000001a408 irq 23
[   20.406382] usb 3-1: new low speed USB device using uhci_hcd and address 2
[   20.581753] usb 3-1: configuration #1 chosen from 1 choice
[   20.701709] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.701715] Uniform CD-ROM driver Revision: 3.20
[   20.701957] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   20.702032] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   20.702043] sd 0:0:0:0: [sda] Write Protect is off
[   20.702045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.702057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.702092] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   20.702099] sd 0:0:0:0: [sda] Write Protect is off
[   20.702101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.702111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.702115]  sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.705478] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   20.721357]  sda1 sda2 < sda5 > sda3
[   20.746535] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.836149] usb 3-2: new full speed USB device using uhci_hcd and address 3
[   21.056316] usb 3-2: configuration #1 chosen from 1 choice
[   21.059439] usbcore: registered new interface driver hiddev
[   21.072434] input: A4Tech USB Optical Mouse as /class/input/input2
[   21.072453] input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.2-1
[   21.072468] usbcore: registered new interface driver usbhid
[   21.072471] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   21.072877] kjournald starting.  Commit interval 5 seconds
[   21.072889] EXT3-fs: mounted filesystem with ordered data mode.
[   27.001043] intel_rng: FWH not detected
[   27.069179] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.076192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.090532] agpgart: Detected an Intel 945G Chipset.
[   27.091353] agpgart: Detected 7932K stolen memory.
[   27.106784] agpgart: AGP aperture is 256M @ 0xe0000000
[   27.126323] input: PC Speaker as /class/input/input3
[   27.190856] iTCO_vendor_support: vendor-support=0
[   27.191765] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   27.191832] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   27.191869] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   27.278486] parport_pc 00:07: reported by Plug and Play ACPI
[   27.278597] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   27.288738] Attansic(R) L2 Ethernet Network Driver - version 1.0.40.2
[   27.288741] Copyright (c) 2006 Attansic Corporation.
[   27.288786] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   27.288795] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   27.330770] Bluetooth: Core ver 2.11
[   27.330821] NET: Registered protocol family 31
[   27.330823] Bluetooth: HCI device and connection manager initialized
[   27.330825] Bluetooth: HCI socket layer initialized
[   27.363267] Bluetooth: HCI USB driver ver 2.9
[   27.366008] usbcore: registered new interface driver hci_usb
[   27.429681] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[   27.494368] ieee80211_init: failed to initialize WME (err=-17)
[   27.533235] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[   27.533281] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[   27.533319] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[   27.533377] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[   27.546384] wmaster0: Selected rate control algorithm 'simple'
[   27.666484] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[   27.666948] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   27.870062] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
 
Old 01-23-2008, 05:34 AM   #9
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
Code:
[   28.380940] lp0: using parport0 (interrupt-driven).
[   29.015272] EXT3 FS on sda3, internal journal
[   32.091233] No dock devices found.
[   32.158268] input: Power Button (FF) as /class/input/input4
[   32.158426] ACPI: Power Button (FF) [PWRF]
[   32.175546] input: Power Button (CM) as /class/input/input5
[   32.175581] ACPI: Power Button (CM) [PWRB]
[   33.115735] ppdev: user-space parallel port driver
[   33.269304] audit(1201087424.960:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5045 profile="/usr/sbin/cupsd"
[   33.580657] Failure registering capabilities with primary security module.
[   33.754942] Bluetooth: L2CAP ver 2.8
[   33.754948] Bluetooth: L2CAP socket layer initialized
[   33.824298] Bluetooth: RFCOMM socket layer initialized
[   33.824436] Bluetooth: RFCOMM TTY layer initialized
[   33.824439] Bluetooth: RFCOMM ver 1.8
[   36.392955] [drm] Initialized drm 1.1.0 20060810
[   36.395076] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.395467] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  148.214092] NET: Registered protocol family 17
[  149.076823] wlan0: Initial auth_alg=0
[  149.076830] wlan0: authenticate with AP 00:17:9a:d8:b0:6a
[  149.078049] wlan0: RX authentication from 00:17:9a:d8:b0:6a (alg=0 transaction=2 status=0)
[  149.078055] wlan0: authenticated
[  149.078059] wlan0: associate with AP 00:17:9a:d8:b0:6a
[  149.079888] wlan0: RX AssocResp from 00:17:9a:d8:b0:6a (capab=0x461 status=0 aid=1)
[  149.079893] wlan0: associated
[  183.890212] wlan0: disassociate(reason=3)
[  198.009022] wlan0: Initial auth_alg=0
[  198.009028] wlan0: authenticate with AP 00:17:9a:d8:b0:6a
[  198.010223] wlan0: RX authentication from 00:17:9a:d8:b0:6a (alg=0 transaction=2 status=0)
[  198.010227] wlan0: authenticated
[  198.010229] wlan0: associate with AP 00:17:9a:d8:b0:6a
[  198.012376] wlan0: RX AssocResp from 00:17:9a:d8:b0:6a (capab=0x461 status=0 aid=1)
[  198.012380] wlan0: associated
[  203.570190] NET: Registered protocol family 10
[  203.570336] lo: Disabled Privacy Extensions
[  203.570591] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  204.212486] wlan0: duplicate address detected!
thats from my install,

it doesnt seem to contain anything about my sound card at all!!! is that bad?

Last edited by Person_1873; 01-23-2008 at 05:36 AM.
 
Old 01-23-2008, 05:52 AM   #10
Person_1873
Member
 
Registered: Sep 2007
Location: Australia
Distribution: Arch Linux
Posts: 489

Original Poster
Rep: Reputation: 39
windoze uses a realtech AC97 driver...

ok i'm the biggest idiot on LinuxQuestions.org, i has the speakers plugged into the wrong jack, DOH!!!!

Last edited by Person_1873; 01-23-2008 at 06:13 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
No sound from Intel 82801g with 2008 sdrambo Mandriva 9 12-16-2007 01:28 PM
No sound. Sound card: Intel 82801G using a Conexant codec Enochs Linux - Hardware 4 07-02-2007 09:14 PM
fc6 intel 82801g sound card problems phaedrusarphan Linux - Hardware 1 01-28-2007 06:40 PM
How to get a Intel 82801G sound card to work after installation dussel Linux - Hardware 4 05-22-2006 11:43 PM
Sound doesnt work after Ubuntu install BeaverusIV Linux - Hardware 4 05-12-2005 05:57 PM


All times are GMT -5. The time now is 01:33 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration