LinuxQuestions.org - Incorrect Hard disk partiton volume labels

I have three hard disks in my PC , hda is used for /, /home, /boot and swap. I recently installed Fedora 10. Everything seems to setup for disk hda.

I then have partitions sdb1 and sdc1

On the edit partion options for these hard drives when installing F10 I can set the mount point. I have never seen this before with the other distros I have used and usually have to mess around with fstab after install to mount these disks, so was pleased to see this option.

Under my previous install (Debian, which I didn't use for long) I had these drives mounted under /media/store1 and /media/store2

This is reflected in the "Edit Parition: /dev/s***" options where the "Original File System Label" is shown as store1 and store2 for each disk

However I decided I wanted to mount them under /media/sdb1 and /media/sdc1

So the "Edit Partion: /dev/s***" ended up looking like this

Mount Point /media/s***
Original File System Label store* Cannot be changed
Format as not selected
Resize not selected
Encrypt not selected

Everything installs great. However when I log in I see both drives on my desktop labelled as store1 and store2. I expected they would be labelled as /dev/s***

Furthermore when I go the properties for these disks and select Permissions it says;
'The permissions of "s***" cannot be determined'
However I am able to view the contents and deleted files.

It seems to me something has gone wrong with mounting of these disks during installation, only I'm not sure what or how to make sure everything is OK

fstab for current installation:

Quote:

#
# /etc/fstab
# Created by anaconda on Thu Apr 30 08:48:22 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or vol_id(8) for more info
#
UUID=d5387498-15d9-4a04-8738-de0eb503f0a3 / ext3 defaults 1 1
UUID=db9fae8d-8fb1-44a0-99dc-9539cf449c7b /home ext3 defaults 1 2
UUID=831c01f2-e0d4-4c2a-9a2c-ea45ab4f9988 /media/sdb1 ext3 defaults 1 2
UUID=2d3cce93-3826-49bd-a7fb-c29ad408bb8d /media/sdc1 ext3 defaults 1 2
UUID=9e184eaf-1dc7-40a2-8562-2daae962fe32 /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sda5 swap swap defaults 0 0

I dont have the fstab from the debian install as it was installed for literally 10 mins. However I had Fedora 10 KDE4 installed previous to that, here is the fstab from that install showing the changes I had to make at the bottom to mount these drives (under different mount points):

Quote:

#
# /etc/fstab
# Created by anaconda on Wed Mar 4 20:02:17 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or vol_id(8) for more info
#
UUID=612b222a-4a8f-4944-a449-24fb935d8f8e / ext3 defaults 1 1
UUID=db9fae8d-8fb1-44a0-99dc-9539cf449c7b /home ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
UUID=1303a808-2c8d-435f-8764-74f1dfbf2862 swap swap defaults 0 0
UUID=b8ff5a6a-9ebd-41bf-af5d-d0fac7bccdfd swap swap defaults 0 0
/dev/sdb1 /media/500GB ext3 defaults 0 0
/dev/sdc1 /media/1TB ext3 defaults 0 0

Another point of interest, I don't recall seeing the same Edit Parition options when installing Fedora 10 KDE...