LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 01-20-2010, 01:21 AM   #1
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Rep: Reputation: 0
IDE DVD drive and SATA 3.0 hard drive not detected on Debian/Ubuntu install


Hello, all. I recently built a new desktop system, and I cannot get the Debian or Ubuntu installation kernels to recognize my DVD drive and (more importantly) my hard drive. I have tried using debian-503-amd64 installation DVD and netinstall via USB drive, and also the Ubuntu 9.10 AMD64 install DVD. The relevant hardware I'm using is an ASRock P55 Extreme mobo, Intel i5, Samsung Spinpoint F3 1GB, and an older DVD drive (purchased around 2003) with an IDE connection to the mobo. I opened a shell during the Debian install and obtained the following output:

Hardware Summary

Code:
umame -a: Linux (none) 2.6.26-2-amd64 #1 SMP Wed Aug 19 22:33:18 UTC 2009 x86_64 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Clarksfield/Lynnfield DMI [8086:d131] (rev 11)
lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 [8086:d138] (rev 11)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:08.0 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield System Management Registers [8086:d155] (rev 11)
lspci -knn: 00:08.1 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers [8086:d156] (rev 11)
lspci -knn: 00:08.2 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers [8086:d157] (rev 11)
lspci -knn: 00:08.3 System peripheral [0880]: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers [8086:d158] (rev 11)
lspci -knn: 00:10.0 System peripheral [0880]: Intel Corporation Device [8086:d150] (rev 11)
lspci -knn: 00:10.1 System peripheral [0880]: Intel Corporation Device [8086:d151] (rev 11)
lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
lspci -knn: 	Kernel driver in use: ehci_hcd
lspci -knn: 	Kernel modules: ehci-hcd
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation Ibex Peak High Definition Audio [8086:3b56] (rev 05)
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 1 [8086:3b42] (rev 05)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 2 [8086:3b44] (rev 05)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 3 [8086:3b46] (rev 05)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 4 [8086:3b48] (rev 05)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root Port 5 [8086:3b4a] (rev 05)
lspci -knn: 	Kernel driver in use: pcieport-driver
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced Host Controller [8086:3b34] (rev 05)
lspci -knn: 	Kernel driver in use: ehci_hcd
lspci -knn: 	Kernel modules: ehci-hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation Ibex Peak LPC Interface Controller [8086:3b02] (rev 05)
lspci -knn: 00:1f.2 IDE interface [0101]: Intel Corporation Ibex Peak 4 port SATA IDE Controller [8086:3b20] (rev 05)
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation Ibex Peak SMBus Controller [8086:3b30] (rev 05)
lspci -knn: 00:1f.5 IDE interface [0101]: Intel Corporation Ibex Peak 2 port SATA IDE Controller [8086:3b26] (rev 05)
lspci -knn: 01:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. Device [1106:3403]
lspci -knn: 	Kernel driver in use: ohci1394
lspci -knn: 	Kernel modules: ohci1394
lspci -knn: 01:00.1 IDE interface [0101]: VIA Technologies, Inc. PATA IDE Host Controller [1106:0415] (rev a0)
lspci -knn: 02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2360] (rev 02)
lspci -knn: 	Kernel driver in use: ahci
lspci -knn: 	Kernel modules: ahci
lspci -knn: 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
lspci -knn: 07:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0615] (rev a2)
lsmod: Module                  Size  Used by
lsmod: sd_mod                 29248  0 
lsmod: vga16fb                16408  2 
lsmod: vgastate               12672  1 vga16fb
lsmod: fan                     9224  0 
lsmod: usbhid                 45408  0 
lsmod: hid                    41536  1 usbhid
lsmod: ff_memless              9224  1 usbhid
lsmod: usb_storage            95296  0 
lsmod: floppy                 61544  0 
lsmod: ahci                   32908  0 
lsmod: libata                165344  1 ahci
lsmod: scsi_mod              160376  3 sd_mod,usb_storage,libata
lsmod: ohci1394               32564  0 
lsmod: dock                   13984  1 libata
lsmod: ieee1394               93432  1 ohci1394
lsmod: ehci_hcd               35980  0 
lsmod: thermal                22560  0 
lsmod: processor              42048  5 thermal
lsmod: thermal_sys            17600  3 fan,thermal,processor
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                  4095948       676   4095272   0% /dev
free:               total         used         free       shared      buffers
free:   Mem:      8191896        58032      8133864            0            0
free:  Swap:            0            0            0
free: Total:      8191896        58032      8133864
/proc/cmdline: priority=low vga=normal initrd=/install.amd/initrd.gz --  BOOT_IMAGE=/install.amd/vmlinuz 
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 30
/proc/cpuinfo: model name	: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
/proc/cpuinfo: stepping	: 5
/proc/cpuinfo: cpu MHz		: 2666.579
/proc/cpuinfo: cache size	: 8192 KB
/proc/cpuinfo: physical id	: 0
/proc/cpuinfo: siblings	: 4
/proc/cpuinfo: core id		: 0
/proc/cpuinfo: cpu cores	: 4
/proc/cpuinfo: apicid		: 0
/proc/cpuinfo: initial apicid	: 0
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 11
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 sse4_2 popcnt lahf_lm ida
/proc/cpuinfo: bogomips	: 5337.91
/proc/cpuinfo: clflush size	: 64
/proc/cpuinfo: cache_alignment	: 64
/proc/cpuinfo: address sizes	: 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo: 
/proc/cpuinfo: processor	: 1
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 30
/proc/cpuinfo: model name	: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
/proc/cpuinfo: stepping	: 5
/proc/cpuinfo: cpu MHz		: 2666.579
/proc/cpuinfo: cache size	: 8192 KB
/proc/cpuinfo: physical id	: 0
/proc/cpuinfo: siblings	: 4
/proc/cpuinfo: core id		: 1
/proc/cpuinfo: cpu cores	: 4
/proc/cpuinfo: apicid		: 2
/proc/cpuinfo: initial apicid	: 2
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 11
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 sse4_2 popcnt lahf_lm ida
/proc/cpuinfo: bogomips	: 5332.98
/proc/cpuinfo: clflush size	: 64
/proc/cpuinfo: cache_alignment	: 64
/proc/cpuinfo: address sizes	: 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo: 
/proc/cpuinfo: processor	: 2
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 30
/proc/cpuinfo: model name	: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
/proc/cpuinfo: stepping	: 5
/proc/cpuinfo: cpu MHz		: 2666.579
/proc/cpuinfo: cache size	: 8192 KB
/proc/cpuinfo: physical id	: 0
/proc/cpuinfo: siblings	: 4
/proc/cpuinfo: core id		: 2
/proc/cpuinfo: cpu cores	: 4
/proc/cpuinfo: apicid		: 4
/proc/cpuinfo: initial apicid	: 4
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 11
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 sse4_2 popcnt lahf_lm ida
/proc/cpuinfo: bogomips	: 5333.01
/proc/cpuinfo: clflush size	: 64
/proc/cpuinfo: cache_alignment	: 64
/proc/cpuinfo: address sizes	: 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo: 
/proc/cpuinfo: processor	: 3
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 6
/proc/cpuinfo: model		: 30
/proc/cpuinfo: model name	: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz
/proc/cpuinfo: stepping	: 5
/proc/cpuinfo: cpu MHz		: 2666.579
/proc/cpuinfo: cache size	: 8192 KB
/proc/cpuinfo: physical id	: 0
/proc/cpuinfo: siblings	: 4
/proc/cpuinfo: core id		: 3
/proc/cpuinfo: cpu cores	: 4
/proc/cpuinfo: apicid		: 6
/proc/cpuinfo: initial apicid	: 6
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 11
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 sse4_2 popcnt lahf_lm ida
/proc/cpuinfo: bogomips	: 5333.00
/proc/cpuinfo: clflush size	: 64
/proc/cpuinfo: cache_alignment	: 64
/proc/cpuinfo: address sizes	: 36 bits physical, 48 bits virtual
/proc/cpuinfo: power management:
/proc/cpuinfo: 
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:1f.2
/proc/ioports: 01f0-01f7 : 0000:00:1f.2
/proc/ioports: 0376-0376 : 0000:00:1f.2
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : 0000:00:1f.2
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-041f : 0000:00:1f.3
/proc/ioports: 04d0-04d1 : pnp 00:08
/proc/ioports: 0500-057f : pnp 00:08
/proc/ioports: 0800-087f : pnp 00:08
/proc/ioports:   0800-0803 : ACPI PM1a_EVT_BLK
/proc/ioports:   0804-0805 : ACPI PM1a_CNT_BLK
/proc/ioports:   0808-080b : ACPI PM_TMR
/proc/ioports:   0810-0815 : ACPI CPU throttle
/proc/ioports:   0820-082f : ACPI GPE0_BLK
/proc/ioports:   0850-0850 : ACPI PM2_CNT_BLK
/proc/ioports: 0a00-0a0f : pnp 00:0b
/proc/ioports: 0a10-0a1f : pnp 00:0b
/proc/ioports: 0a20-0a2f : pnp 00:0b
/proc/ioports: 0a30-0a3f : pnp 00:0b
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: a080-a08f : 0000:00:1f.5
/proc/ioports: a400-a40f : 0000:00:1f.5
/proc/ioports: a480-a483 : 0000:00:1f.5
/proc/ioports: a800-a807 : 0000:00:1f.5
/proc/ioports: a880-a883 : 0000:00:1f.5
/proc/ioports: ac00-ac07 : 0000:00:1f.5
/proc/ioports: b000-bfff : PCI Bus 0000:01
/proc/ioports:   b000-b0ff : 0000:01:00.0
/proc/ioports:   b400-b40f : 0000:01:00.1
/proc/ioports:   b480-b483 : 0000:01:00.1
/proc/ioports:   b800-b807 : 0000:01:00.1
/proc/ioports:   b880-b883 : 0000:01:00.1
/proc/ioports:   bc00-bc07 : 0000:01:00.1
/proc/ioports: c000-cfff : PCI Bus 0000:02
/proc/ioports:   c400-c40f : 0000:02:00.0
/proc/ioports:     c400-c40f : ahci
/proc/ioports:   c480-c483 : 0000:02:00.0
/proc/ioports:     c480-c483 : ahci
/proc/ioports:   c800-c807 : 0000:02:00.0
/proc/ioports:     c800-c807 : ahci
/proc/ioports:   c880-c883 : 0000:02:00.0
/proc/ioports:     c880-c883 : ahci
/proc/ioports:   cc00-cc07 : 0000:02:00.0
/proc/ioports:     cc00-cc07 : ahci
/proc/ioports: d000-dfff : PCI Bus 0000:03
/proc/ioports:   d800-d8ff : 0000:03:00.0
/proc/ioports: e000-efff : PCI Bus 0000:07
/proc/ioports:   ec00-ec7f : 0000:07:00.0
/proc/ioports: ff90-ff9f : 0000:00:1f.2
/proc/ioports: ffa0-ffaf : 0000:00:1f.2
/proc/iomem: 00000000-0009f7ff : System RAM
/proc/iomem: 0009f800-0009ffff : reserved
/proc/iomem: 000c0000-000cffff : pnp 00:0d
/proc/iomem: 000e4000-000fffff : reserved
/proc/iomem: 00100000-c776ffff : System RAM
/proc/iomem:   00200000-0042d0ea : Kernel code
/proc/iomem:   0042d0eb-0053b6f7 : Kernel data
/proc/iomem:   005e0000-00675397 : Kernel bss
/proc/iomem: c7770000-c777ffff : ACPI Tables
/proc/iomem: c7780000-c77cffff : ACPI Non-volatile Storage
/proc/iomem: c77d0000-c77dffff : reserved
/proc/iomem: c77eb400-c7ffffff : reserved
/proc/iomem: cfd00000-cfdfffff : PCI Bus 0000:03
/proc/iomem:   cfdf8000-cfdfbfff : 0000:03:00.0
/proc/iomem:   cfdff000-cfdfffff : 0000:03:00.0
/proc/iomem: cfe00000-cfefffff : PCI Bus 0000:04
/proc/iomem: cff00000-cfffffff : PCI Bus 0000:05
/proc/iomem: d0000000-dfffffff : PCI Bus 0000:07
/proc/iomem:   d0000000-dfffffff : 0000:07:00.0
/proc/iomem: e0000000-efffffff : PCI MMCONFIG 0
/proc/iomem:   e0000000-efffffff : pnp 00:0c
/proc/iomem: f7cf6000-f7cf63ff : 0000:00:1a.0
/proc/iomem:   f7cf6000-f7cf63ff : ehci_hcd
/proc/iomem: f7cf8000-f7cfbfff : 0000:00:1b.0
/proc/iomem: f7cfc000-f7cfc3ff : 0000:00:1d.0
/proc/iomem:   f7cfc000-f7cfc3ff : ehci_hcd
/proc/iomem: f7cffc00-f7cffcff : 0000:00:1f.3
/proc/iomem: f7d00000-f7dfffff : PCI Bus 0000:01
/proc/iomem:   f7def800-f7deffff : 0000:01:00.0
/proc/iomem:     f7def800-f7deffff : ohci1394
/proc/iomem:   f7df0000-f7dfffff : 0000:01:00.1
/proc/iomem: f7e00000-f7efffff : PCI Bus 0000:02
/proc/iomem:   f7efe000-f7efffff : 0000:02:00.0
/proc/iomem:     f7efe000-f7efffff : ahci
/proc/iomem: f7f00000-f7ffffff : PCI Bus 0000:03
/proc/iomem:   f7fe0000-f7ffffff : 0000:03:00.0
/proc/iomem: f8000000-fbffffff : PCI Bus 0000:07
/proc/iomem:   f8000000-f9ffffff : 0000:07:00.0
/proc/iomem:   fafe0000-faffffff : 0000:07:00.0
/proc/iomem:   fb000000-fbffffff : 0000:07:00.0
/proc/iomem: fc000000-fcffffff : pnp 00:01
/proc/iomem: fd000000-fdffffff : pnp 00:01
/proc/iomem: fe000000-febfffff : pnp 00:01
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem:   fec00000-fec00fff : pnp 00:09
/proc/iomem: fed14000-fed19fff : pnp 00:01
/proc/iomem: fed1c000-fed1ffff : pnp 00:08
/proc/iomem: fed20000-fed3ffff : pnp 00:08
/proc/iomem: fed40000-fed8ffff : pnp 00:08
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem:   fee00000-fee00fff : reserved
/proc/iomem: ffa00000-ffffffff : reserved
/proc/iomem: 100000000-237ffffff : System RAM
/proc/interrupts:            CPU0       CPU1       CPU2       CPU3       
/proc/interrupts:   0:         37          0          0       2799   IO-APIC-edge      timer
/proc/interrupts:   1:          0          0          0         55   IO-APIC-edge      i8042
/proc/interrupts:   6:          0          0          0          3   IO-APIC-edge      floppy
/proc/interrupts:   8:          0          0          0          0   IO-APIC-edge      rtc0
/proc/interrupts:   9:          0          0          0          0   IO-APIC-fasteoi   acpi
/proc/interrupts:  16:        251          0          0          0   IO-APIC-fasteoi   ehci_hcd:usb1
/proc/interrupts:  17:          0          2          0          0   IO-APIC-fasteoi   ohci1394
/proc/interrupts:  19:          0          0          0          0   IO-APIC-fasteoi   ahci
/proc/interrupts:  23:          0        290          0          0   IO-APIC-fasteoi   ehci_hcd:usb2
/proc/interrupts: NMI:          0          0          0          0   Non-maskable interrupts
/proc/interrupts: LOC:       1015       1054        762        209   Local timer interrupts
/proc/interrupts: RES:        554        513        358        515   Rescheduling interrupts
/proc/interrupts: CAL:         44        105        101         83   function call interrupts
/proc/interrupts: TLB:         46         47         42         61   TLB shootdowns
/proc/interrupts: TRM:          0          0          0          0   Thermal event interrupts
/proc/interrupts: THR:          0          0          0          0   Threshold APIC interrupts
/proc/interrupts: SPU:          0          0          0          0   Spurious interrupts
/proc/interrupts: ERR:          0
/proc/meminfo: MemTotal:      8191896 kB
/proc/meminfo: MemFree:       8133520 kB
/proc/meminfo: Buffers:             0 kB
/proc/meminfo: Cached:          16344 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:           7360 kB
/proc/meminfo: Inactive:        11172 kB
/proc/meminfo: SwapTotal:           0 kB
/proc/meminfo: SwapFree:            0 kB
/proc/meminfo: Dirty:               0 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: AnonPages:        2228 kB
/proc/meminfo: Mapped:           1504 kB
/proc/meminfo: Slab:             8792 kB
/proc/meminfo: SReclaimable:     2568 kB
/proc/meminfo: SUnreclaim:       6224 kB
/proc/meminfo: PageTables:        472 kB
/proc/meminfo: NFS_Unstable:        0 kB
/proc/meminfo: Bounce:              0 kB
/proc/meminfo: WritebackTmp:        0 kB
/proc/meminfo: CommitLimit:   4095948 kB
/proc/meminfo: Committed_AS:     5808 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed:    286100 kB
/proc/meminfo: VmallocChunk: 34359452143 kB
/proc/meminfo: HugePages_Total:     0
/proc/meminfo: HugePages_Free:      0
/proc/meminfo: HugePages_Rsvd:      0
/proc/meminfo: HugePages_Surp:      0
/proc/meminfo: Hugepagesize:     2048 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse0 
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices: 
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices: 
/proc/bus/input/devices: I: Bus=0003 Vendor=047d Product=102d Version=0110
/proc/bus/input/devices: N: Name="Kensington      Kensington USB/PS2 Wheel Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.0-1.1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse1 
/proc/bus/input/devices: B: EV=17
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
 
Old 01-20-2010, 01:24 AM   #2
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
more info

OS Release Info

Code:
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123lenny4"
X_INSTALLATION_MEDIUM=cdrom
syslog

Code:
Jan 19 21:46:43 syslogd started: BusyBox v1.10.2
Jan 19 21:46:43 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2)
Jan 19 21:46:43 kernel: [    0.000000] Initializing cgroup subsys cpuset
Jan 19 21:46:43 kernel: [    0.000000] Initializing cgroup subsys cpu
Jan 19 21:46:43 kernel: [    0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 22:33:18 UTC 2009
Jan 19 21:46:43 kernel: [    0.000000] Command line: priority=low vga=normal initrd=/install.amd/initrd.gz --  BOOT_IMAGE=/install.amd/vmlinuz 
Jan 19 21:46:43 kernel: [    0.000000] BIOS-provided physical RAM map:
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 00000000c7770000 (usable)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000c7770000 - 00000000c7780000 (ACPI data)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000c7780000 - 00000000c77d0000 (ACPI NVS)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000c77d0000 - 00000000c77e0000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000c77eb400 - 00000000c8000000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
Jan 19 21:46:43 kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 256, 817008) 1 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 1048576, 2326528) 2 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] max_pfn_mapped = 2326528
Jan 19 21:46:43 kernel: [    0.000000] init_memory_mapping
Jan 19 21:46:43 kernel: [    0.000000] DMI present.
Jan 19 21:46:43 kernel: [    0.000000] ACPI: RSDP 000FA900, 0014 (r0 ACPIAM)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: RSDT C7770000, 0040 (r1 103009 RSDT1438 20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: FACP C7770200, 0084 (r1 A_M_I  OEMFACP  12000601 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: DSDT C7770460, 77D1 (r1  AS242 AS24217F      17F INTL 20051117)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: FACS C7780000, 0040
Jan 19 21:46:43 kernel: [    0.000000] ACPI: APIC C7770390, 008C (r1 103009 APIC1438 20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: MCFG C7770420, 003C (r1 103009 OEMMCFG  20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: OEMB C7780040, 0073 (r1 103009 OEMB1438 20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: AAFT C777A460, 0027 (r1 103009 OEMAAFT  20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: GSCI C77800C0, 2024 (r1 103009 GMCHSCI  20091030 MSFT       97)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: SSDT C7783700, 0363 (r1 DpgPmm    CpuPm       12 INTL 20051117)
Jan 19 21:46:43 kernel: [    0.000000] No NUMA configuration found
Jan 19 21:46:43 kernel: [    0.000000] Faking a node at 0000000000000000-0000000238000000
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 256, 817008) 1 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] Entering add_active_range(0, 1048576, 2326528) 2 entries of 3200 used
Jan 19 21:46:43 kernel: [    0.000000] Bootmem setup node 0 0000000000000000-0000000238000000
Jan 19 21:46:43 kernel: [    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
Jan 19 21:46:43 kernel: [    0.000000]   bootmap [0000000000017000 -  000000000005dfff] pages 47
Jan 19 21:46:43 kernel: [    0.000000]   early res: 0 [0-fff] BIOS data page
Jan 19 21:46:43 kernel: [    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
Jan 19 21:46:43 kernel: [    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
Jan 19 21:46:43 kernel: [    0.000000]   early res: 3 [7fba5000-7ffff3a8] RAMDISK
Jan 19 21:46:43 kernel: [    0.000000]   early res: 4 [9f800-fffff] BIOS reserved
Jan 19 21:46:43 kernel: [    0.000000]   early res: 5 [8000-11fff] PGTABLE
Jan 19 21:46:43 kernel: [    0.000000]  [ffffe20000000000-ffffe200039fffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
Jan 19 21:46:43 kernel: [    0.000000]  [ffffe20003a00000-ffffe20007dfffff] PMD -> [ffff81000c000000-ffff8100103fffff] on node 0
Jan 19 21:46:43 kernel: [    0.000000] Zone PFN ranges:
Jan 19 21:46:43 kernel: [    0.000000]   DMA             0 ->     4096
Jan 19 21:46:43 kernel: [    0.000000]   DMA32        4096 ->  1048576
Jan 19 21:46:43 kernel: [    0.000000]   Normal    1048576 ->  2326528
Jan 19 21:46:43 kernel: [    0.000000] Movable zone start PFN for each node
Jan 19 21:46:43 kernel: [    0.000000] early_node_map[3] active PFN ranges
Jan 19 21:46:43 kernel: [    0.000000]     0:        0 ->      159
Jan 19 21:46:43 kernel: [    0.000000]     0:      256 ->   817008
Jan 19 21:46:43 kernel: [    0.000000]     0:  1048576 ->  2326528
Jan 19 21:46:43 kernel: [    0.000000] On node 0 totalpages: 2094863
Jan 19 21:46:43 kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Jan 19 21:46:43 kernel: [    0.000000]   DMA zone: 1252 pages reserved
Jan 19 21:46:43 kernel: [    0.000000]   DMA zone: 2691 pages, LIFO batch:0
Jan 19 21:46:43 kernel: [    0.000000]   DMA32 zone: 14280 pages used for memmap
Jan 19 21:46:43 kernel: [    0.000000]   DMA32 zone: 798632 pages, LIFO batch:31
Jan 19 21:46:43 kernel: [    0.000000]   Normal zone: 17472 pages used for memmap
Jan 19 21:46:43 kernel: [    0.000000]   Normal zone: 1260480 pages, LIFO batch:31
Jan 19 21:46:43 kernel: [    0.000000]   Movable zone: 0 pages used for memmap
Jan 19 21:46:43 kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Jan 19 21:46:43 kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
Jan 19 21:46:43 kernel: [    0.000000] IOAPIC[0]: apic_id 7, version 0, address 0xfec00000, GSI 0-23
Jan 19 21:46:43 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 19 21:46:43 kernel: [    0.000000] ACPI: IRQ0 used by override.
Jan 19 21:46:43 kernel: [    0.000000] ACPI: IRQ2 used by override.
Jan 19 21:46:43 kernel: [    0.000000] ACPI: IRQ9 used by override.
Jan 19 21:46:43 kernel: [    0.000000] Setting APIC routing to flat
Jan 19 21:46:43 kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c7770000 - 00000000c7780000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c7780000 - 00000000c77d0000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c77d0000 - 00000000c77e0000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c77e0000 - 00000000c77ec000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c77ec000 - 00000000c8000000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fee00000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
Jan 19 21:46:43 kernel: [    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Jan 19 21:46:43 kernel: [    0.000000] Allocating PCI resources starting at cc000000 (gap: c8000000:36e00000)
Jan 19 21:46:43 kernel: [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
Jan 19 21:46:43 kernel: [    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
Jan 19 21:46:43 kernel: [    0.000000] NR_CPUS: 32, nr_cpu_ids: 8
Jan 19 21:46:43 kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2061803
Jan 19 21:46:43 kernel: [    0.000000] Policy zone: Normal
Jan 19 21:46:43 kernel: [    0.000000] Kernel command line: priority=low vga=normal initrd=/install.amd/initrd.gz --  BOOT_IMAGE=/install.amd/vmlinuz 
Jan 19 21:46:43 kernel: [    0.000000] Initializing CPU#0
Jan 19 21:46:43 kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Jan 19 21:46:43 kernel: [    0.000000] TSC calibrated against PM_TIMER
Jan 19 21:46:43 kernel: [    0.000000] time.c: Detected 2666.579 MHz processor.
Jan 19 21:46:43 kernel: [    0.004000] Console: colour VGA+ 80x25
Jan 19 21:46:43 kernel: [    0.004000] console [tty0] enabled
Jan 19 21:46:43 kernel: [    0.004000] Checking aperture...
Jan 19 21:46:43 kernel: [    0.004000] Calgary: detecting Calgary via BIOS EBDA area
Jan 19 21:46:43 kernel: [    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Jan 19 21:46:43 kernel: [    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jan 19 21:46:43 kernel: [    0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
Jan 19 21:46:43 kernel: [    0.004000] Memory: 8187044k/9306112k available (2228k kernel code, 192408k reserved, 1081k data, 392k init)
Jan 19 21:46:43 kernel: [    0.004000] CPA: page pool initialized 1 of 1 pag
Jan 19 21:46:43 kernel: es preallocated
Jan 19 21:46:43 kernel: [    0.084091] Calibrating delay using timer specific routine.. 5337.91 BogoMIPS (lpj=10675833)
Jan 19 21:46:43 kernel: [    0.084239] Security Framework initialized
Jan 19 21:46:43 kernel: [    0.084304] SELinux:  Disabled at boot.
Jan 19 21:46:43 kernel: [    0.084366] Capability LSM initialized
Jan 19 21:46:43 kernel: [    0.084896] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 19 21:46:43 kernel: [    0.086558] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 19 21:46:43 kernel: [    0.087329] Mount-cache hash table entries: 256
Jan 19 21:46:43 kernel: [    0.087555] Initializing cgroup subsys ns
Jan 19 21:46:43 kernel: [    0.087618] Initializing cgroup subsys cpuacct
Jan 19 21:46:43 kernel: [    0.087682] Initializing cgroup subsys devices
Jan 19 21:46:43 kernel: [    0.087757] CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 19 21:46:43 kernel: [    0.087862] CPU: L2 cache: 256K
Jan 19 21:46:43 kernel: [    0.087923] CPU: L3 cache: 8192K
Jan 19 21:46:43 kernel: [    0.087984] CPU 0/0 -> Node 0
Jan 19 21:46:43 kernel: [    0.088005] CPU: Physical Processor ID: 0
Jan 19 21:46:43 kernel: [    0.088080] CPU: Processor Core ID: 0
Jan 19 21:46:43 kernel: [    0.088142] MCE: warning: using only 9 banks
Jan 19 21:46:43 kernel: [    0.088211] CPU0: Thermal monitoring enabled (TM1)
Jan 19 21:46:43 kernel: [    0.088274] using mwait in idle threads.
Jan 19 21:46:43 kernel: [    0.088997] ACPI: Core revision 20080321
Jan 19 21:46:43 kernel: [    0.144009] CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
Jan 19 21:46:43 kernel: [    0.144009] Using local APIC timer interrupts.
Jan 19 21:46:43 kernel: [    0.148009] APIC timer calibration result 8333057
Jan 19 21:46:43 kernel: [    0.148009] Detected 8.333 MHz APIC timer.
Jan 19 21:46:43 kernel: [    0.148009] Booting processor 1/2 ip 6000
Jan 19 21:46:43 kernel: [    0.160010] Initializing CPU#1
Jan 19 21:46:43 kernel: [    0.160010] Calibrating delay using timer specific routine.. 5332.98 BogoMIPS (lpj=10665977)
Jan 19 21:46:43 kernel: [    0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 19 21:46:43 kernel: [    0.160010] CPU: L2 cache: 256K
Jan 19 21:46:43 kernel: [    0.160010] CPU: L3 cache: 8192K
Jan 19 21:46:43 kernel: [    0.160010] CPU 1/2 -> Node 0
Jan 19 21:46:43 kernel: [    0.160010] CPU: Physical Processor ID: 0
Jan 19 21:46:43 kernel: [    0.160010] CPU: Processor Core ID: 1
Jan 19 21:46:43 kernel: [    0.160010] MCE: warning: using only 9 banks
Jan 19 21:46:43 kernel: [    0.160010] CPU1: Thermal monitoring enabled (TM1)
Jan 19 21:46:43 kernel: [    0.240015] CPU1: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
Jan 19 21:46:43 kernel: [    0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jan 19 21:46:43 kernel: [    0.244015] Booting processor 2/4 ip 6000
Jan 19 21:46:43 kernel: [    0.256016] Initializing CPU#2
Jan 19 21:46:43 kernel: [    0.256016] Calibrating delay using timer specific routine.. 5333.01 BogoMIPS (lpj=10666026)
Jan 19 21:46:43 kernel: [    0.256016] CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 19 21:46:43 kernel: [    0.256016] CPU: L2 cache: 256K
Jan 19 21:46:43 kernel: [    0.256016] CPU: L3 cache: 8192K
Jan 19 21:46:43 kernel: [    0.256016] CPU 2/4 -> Node 0
Jan 19 21:46:43 kernel: [    0.256016] CPU: Physical Processor ID: 0
Jan 19 21:46:43 kernel: [    0.256016] CPU: Processor Core ID: 2
Jan 19 21:46:43 kernel: [    0.256016] MCE: warning: using only 9 banks
Jan 19 21:46:43 kernel: [    0.256016] CPU2: Thermal monitoring enabled (TM1)
Jan 19 21:46:43 kernel: [    0.335006] CPU2: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
Jan 19 21:46:43 kernel: [    0.335802] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Jan 19 21:46:43 kernel: [    0.340021] Booting processor 3/6 ip 6000
Jan 19 21:46:43 kernel: [    0.352022] Initializing CPU#3
Jan 19 21:46:43 kernel: [    0.352022] Calibrating delay using timer specific routine.. 5333.00 BogoMIPS (lpj=10666012)
Jan 19 21:46:43 kernel: [    0.352022] CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 19 21:46:43 kernel: [    0.352022] CPU: L2 cache: 256K
Jan 19 21:46:43 kernel: [    0.352022] CPU: L3 cache: 8192K
Jan 19 21:46:43 kernel: [    0.352022] CPU 3/6 -> Node 0
Jan 19 21:46:43 kernel: [    0.352022] CPU: Physical Processor ID: 0
Jan 19 21:46:43 kernel: [    0.352022] CPU: Processor Core ID: 3
Jan 19 21:46:43 kernel: [    0.352022] MCE: warning: using only 9 banks
Jan 19 21:46:43 kernel: [    0.352022] CPU3: Thermal monitoring enabled (TM1)
Jan 19 21:46:43 kernel: [    0.432495] CPU3: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz stepping 05
Jan 19 21:46:43 kernel: [    0.433291] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Jan 19 21:46:43 kernel: [    0.437415] Brought up 4 CPUs
Jan 19 21:46:43 kernel: [    0.437415] Total of 4 processors activated (21336.92 BogoMIPS).
Jan 19 21:46:43 kernel: [    0.437415] CPU0 attaching sched-domain:
Jan 19 21:46:43 kernel: [    0.437415]  domain 0: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]   groups: 0 1 2 3
Jan 19 21:46:43 kernel: [    0.437415]   domain 1: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]    groups: 0-3
Jan 19 21:46:43 kernel: [    0.437415] CPU1 attaching sched-domain:
Jan 19 21:46:43 kernel: [    0.437415]  domain 0: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]   groups: 1 2 3 0
Jan 19 21:46:43 kernel: [    0.437415]   domain 1: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]    groups: 0-3
Jan 19 21:46:43 kernel: [    0.437415] CPU2 attaching sched-domain:
Jan 19 21:46:43 kernel: [    0.437415]  domain 0: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]   groups: 2 3 0 1
Jan 19 21:46:43 kernel: [    0.437415]   domain 1: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]    groups: 0-3
Jan 19 21:46:43 kernel: [    0.437415] CPU3 attaching sched-domain:
Jan 19 21:46:43 kernel: [    0.437415]  domain 0: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]   groups: 3 0 1 2
Jan 19 21:46:43 kernel: [    0.437415]   domain 1: span 0-3
Jan 19 21:46:43 kernel: [    0.437415]    groups: 0-3
Jan 19 21:46:43 kernel: [    0.437415] net_namespace: 1224 bytes
Jan 19 21:46:43 kernel: [    0.437415] Booting paravirtualized kernel on bare hardware
Jan 19 21:46:43 kernel: [    0.437415] NET: Registered protocol family 16
Jan 19 21:46:43 kernel: [    0.437415] ACPI: bus type pci registered
Jan 19 21:46:43 kernel: [    0.437415] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jan 19 21:46:43 kernel: [    0.437415] PCI: Not using MMCONFIG.
Jan 19 21:46:43 kernel: [    0.437415] PCI: Using configuration type 1 for base access
Jan 19 21:46:43 kernel: [    0.437416] ACPI: EC: Look up EC in DSDT
Jan 19 21:46:43 kernel: [    0.449291] ACPI: Interpreter enabled
Jan 19 21:46:43 kernel: [    0.449354] ACPI: (supports S0 S1 S3 S4 S5)
Jan 19 21:46:43 kernel: [    0.449584] ACPI: Using IOAPIC for interrupt routing
Jan 19 21:46:43 kernel: [    0.449584] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jan 19 21:46:43 kernel: [    0.457291] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Jan 19 21:46:43 kernel: [    0.469292] PCI: Using MMCONFIG at e0000000 - efffffff
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 19 21:46:43 kernel: [    0.483513] PCI: Transparent bridge - 0000:00:1e.0
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
Jan 19 21:46:43 kernel: [    0.483513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
Jan 19 21:46:43 kernel: [    0.483623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
Jan 19 21:46:43 kernel: [    0.507515] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
Jan 19 21:46:43 kernel: [    0.507515] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
Jan 19 21:46:43 kernel: [    0.507515] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
Jan 19 21:46:43 kernel: [    0.507515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
Jan 19 21:46:43 kernel: [    0.511515] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jan 19 21:46:43 kernel: [    0.511515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
Jan 19 21:46:43 kernel: [    0.511515] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
Jan 19 21:46:43 kernel: [    0.511515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
Jan 19 21:46:43 kernel: [    0.515515] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 03, should be FA [20080321]
Jan 19 21:46:43 kernel: [    0.515515] Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 19 21:46:43 kernel: [    0.515515] pnp: PnP ACPI init
Jan 19 21:46:43 kernel: [    0.515515] ACPI: bus type pnp registered
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:00: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01:   add mem 0xfc000000-0xfcffffff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01:   add mem 0xfd000000-0xfdffffff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01:   add mem 0xfe000000-0xfebfffff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01:   add mem 0xfed14000-0xfed19fff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add dma 4 flags 0x4
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0x0-0xf flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0x81-0x83 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0x87-0x87 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0x89-0x8b flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0x8f-0x8f flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02:   add io  0xc0-0xdf flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:03: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:03:   add io  0x70-0x71 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:03:   add irq 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:03: Plug and Play ACPI device, IDs PNP
Jan 19 21:46:43 kernel: 0b00 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:04: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:04:   add io  0x61-0x61 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:05: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:05:   add io  0xf0-0xff flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:05:   add irq 13 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   add io  0x3f0-0x3f5 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   add io  0x3f7-0x3f7 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   add irq 6 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   add dma 2 flags 0x0
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: parse resource options
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: new independent option
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: new dependent option (priority 0x0)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   dma bitmask 0x4 flags 0x0
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
 
Old 01-20-2010, 01:27 AM   #3
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
more info

more syslog

Code:
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x370 max 0x370 align 1 size 6 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   io  min 0x377 max 0x377 align 1 size 1 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: end dependent options
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:07: parse allocated resources
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:07:   add io  0x60-0x60 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:07:   add io  0x64-0x64 flags 0x1
Jan 19 21:46:43 kernel: [    0.515515] pnp 00:07:   add irq 1 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x10-0x1f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x22-0x3f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x44-0x4d flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x50-0x5f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x62-0x63 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x65-0x6f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x72-0x7f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x80-0x80 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x84-0x86 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x88-0x88 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x8c-0x8e flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x90-0x9f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0xa2-0xbf flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0xe0-0xef flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x4d0-0x4d1 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x800-0x87f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x0-0xffffffffffffffff flags 0x10000001
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add io  0x500-0x57f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add mem 0xfed1c000-0xfed1ffff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add mem 0xfed20000-0xfed3ffff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08:   add mem 0xfed40000-0xfed8ffff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:09: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:09:   add mem 0xfec00000-0xfec00fff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:09:   add mem 0xfee00000-0xfee00fff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   add io  0x3f8-0x3ff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   add irq 4 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: parse resource options
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new independent option
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x0)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: new dependent option (priority 0x1)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a:   dma bitmask 0xf flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: end dependent options
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b:   add io  0x0-0xffffffffffffffff flags 0x10000001
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b:   add io  0xa00-0xa0f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b:   add io  0xa10-0xa1f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b:   add io  0xa20-0xa2f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b:   add io  0xa30-0xa3f flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0c: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0c:   add mem 0xe0000000-0xefffffff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0
Jan 19 21:46:43 kernel: c: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d: parse allocated resources
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d:   add mem 0x0-0x9ffff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d:   add mem 0xc0000-0xcffff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d:   add mem 0xe0000-0xfffff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d:   add mem 0x100000-0xc7ffffff flags 0x1
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d:   add mem 0xfed90000-0xffffffff flags 0x0
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
Jan 19 21:46:43 kernel: [    0.519515] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 19 21:46:43 kernel: [    0.519515] pnp: PnP ACPI: found 14 devices
Jan 19 21:46:43 kernel: [    0.519515] ACPI: ACPI bus type pnp unregistered
Jan 19 21:46:43 kernel: [    0.519515] usbcore: registered new interface driver usbfs
Jan 19 21:46:43 kernel: [    0.519515] usbcore: registered new interface driver hub
Jan 19 21:46:43 kernel: [    0.519515] usbcore: registered new device driver usb
Jan 19 21:46:43 kernel: [    0.519515] PCI: Using ACPI for IRQ routing
Jan 19 21:46:43 kernel: [    0.537342] PCI-GART: No AMD northbridge found.
Jan 19 21:46:43 kernel: [    0.537441] ACPI: RTC can wake from S4
Jan 19 21:46:43 kernel: [    0.554717] pnp: the driver 'system' has been registered
Jan 19 21:46:43 kernel: [    0.554732] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
Jan 19 21:46:43 kernel: [    0.554811] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
Jan 19 21:46:43 kernel: [    0.554879] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
Jan 19 21:46:43 kernel: [    0.554946] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Jan 19 21:46:43 kernel: [    0.555014] system 00:01: driver attached
Jan 19 21:46:43 kernel: [    0.555019] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Jan 19 21:46:43 kernel: [    0.555086] system 00:08: ioport range 0x800-0x87f has been reserved
Jan 19 21:46:43 kernel: [    0.555152] system 00:08: ioport range 0x500-0x57f has been reserved
Jan 19 21:46:43 kernel: [    0.555219] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
Jan 19 21:46:43 kernel: [    0.555287] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
Jan 19 21:46:43 kernel: [    0.555355] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
Jan 19 21:46:43 kernel: [    0.555422] system 00:08: driver attached
Jan 19 21:46:43 kernel: [    0.555426] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Jan 19 21:46:43 kernel: [    0.555494] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
Jan 19 21:46:43 kernel: [    0.555574] system 00:09: driver attached
Jan 19 21:46:43 kernel: [    0.555578] system 00:0b: ioport range 0xa00-0xa0f has been reserved
Jan 19 21:46:43 kernel: [    0.555645] system 00:0b: ioport range 0xa10-0xa1f has been reserved
Jan 19 21:46:43 kernel: [    0.555711] system 00:0b: ioport range 0xa20-0xa2f has been reserved
Jan 19 21:46:43 kernel: [    0.555778] system 00:0b: ioport range 0xa30-0xa3f has been reserved
Jan 19 21:46:43 kernel: [    0.555844] system 00:0b: driver attached
Jan 19 21:46:43 kernel: [    0.555847] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
Jan 19 21:46:43 kernel: [    0.555915] system 00:0c: driver attached
Jan 19 21:46:43 kernel: [    0.555919] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
Jan 19 21:46:43 kernel: [    0.555986] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
Jan 19 21:46:43 kernel: [    0.556857] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
Jan 19 21:46:43 kernel: [    0.556925] system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved
Jan 19 21:46:43 kernel: [    0.558714] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
Jan 19 21:46:43 kernel: [    0.558795] system 00:0d: driver attached
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:03.0
Jan 19 21:46:43 kernel: [    0.560784]   IO window: e000-efff
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: 0xf8000000-0xfbffffff
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1c.0
Jan 19 21:46:43 kernel: [    0.560784]   IO window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: 0x00000000cff00000-0x00000000cfffffff
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1c.1
Jan 19 21:46:43 kernel: [    0.560784]   IO window: b000-bfff
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: 0xf7d00000-0xf7dfffff
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: disabled.
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1c.2
Jan 19 21:46:43 kernel: [    0.560784]   IO window: d000-dfff
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: 0xf7f00000-0xf7ffffff
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: 0x00000000cfd00000-0x00000000cfdfffff
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1c.3
Jan 19 21:46:43 kernel: [    0.560784]   IO window: c000-cfff
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: 0xf7e00000-0xf7efffff
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: disabled.
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1c.4
Jan 19 21:46:43 kernel: [    0.560784]   IO window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: 0x00000000cfe00000-0x00000000cfefffff
Jan 19 21:46:43 kernel: [    0.560784] PCI: Bridge: 0000:00:1e.0
Jan 19 21:46:43 kernel: [    0.560784]   IO window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   MEM window: disabled.
Jan 19 21:46:43 kernel: [    0.560784]   PREFETCH window: disabled.
Jan 19 21:46:43 kernel: [    0.560784] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 19 21:46:43 kernel: [    0.560784] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jan 19 21:46:43 kernel: [    0.560784] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Jan 19 21:46:43 kernel: [    0.560784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 19 21:46:43 kernel: [    0.560784] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
Jan 19 21:46:43 kernel: [    0.560911] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jan 19 21:46:43 kernel: [    0.560925] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 19 21:46:43 kernel: [    0.561050] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jan 19 21:46:43 kernel: [    0.561064] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Jan 19 21:46:43 kernel: [    0.561189] PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 19 21:46:43 kernel: [    0.561202] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
Jan 19 21:46:43 kernel: [    0.561327] PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 19 21:46:43 kernel: [    0.561335] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 19 21:46:43 kernel: [    0.561357] NET: Registered protocol family 2
Jan 19 21:46:43 kernel: [    0.605103] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 19 21:46:43 kernel: [    0.605921] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Jan 19 21:46:43 kernel: [    0.608475] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 19 21:46:43 kernel: [    0.608821] TCP: Hash tables configured (established 524288 bind 65536)
Jan 19 21:46:43 kernel: [    0.608888] TCP reno registered
Jan 19 21:46:43 kernel: [    0.617204] NET: Registered protocol family 1
Jan 19 21:46:43 kernel: [    0.617327] checking if image is initramfs... it is
Jan 19 21:46:43 kernel: [    0.901918] Freeing initrd memory: 4456k freed
Jan 19 21:46:43 kernel: [    0.907369] audit: initializing netlink socket (disabled)
Jan 19 21:46:43 kernel: [    0.907442] type=2000 audit(1263937600.892:1): initialized
Jan 19 21:46:43 kernel: [    0.908472] Total HugeTLB memory allocated, 0
Jan 19 21:46:43 kernel: [    0.908472] VFS: Disk quotas dquot_6.5.1
Jan 19 21:46:43 kernel: [    0.908472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 19 21:46:43 kernel: [    0.908472] msgmni has been set to 15999
Jan 19 21:46:43 kernel: [    0.908472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan 19 21:46:43 kernel: [    0.908472] io scheduler noop registered
Jan 19 21:46:43 kernel: [    0.908472] io scheduler anticipatory registered
Jan 19 21:46:43 kernel: [    0.908472] io scheduler deadline registered
Jan 19 21:46:43 kernel: [    0.908472] io scheduler cfq registered (default)
Jan 19 21:46:43 kernel: [    0.908472] pci 0000:07:00.0: Boot video device
Jan 19 21:46:43 kernel: [    0.908472] PCI: Setting latency timer of device 0000:00:03.0 to 64
Jan 19 21:46:43 kernel: [    0.908472] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908472] Allocate Port Service[0000:00:03.0:pcie00]
Jan 19 21:46:43 kernel: [    0.908472] Allocate Port Service[0000:00:03.0:pcie01]
Jan 19 21:46:43 kernel: [    0.908472] PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 19 21:46:43 kernel: [    0.908472] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908472] Allocate Port Service[0000:00:1c.0:pcie00]
Jan 19 21:46:43 kernel: [    0.908472] Allocate Port Service[0000:00:1c.0:pcie02]
Jan 19 21:46:43 kernel: [    0.908512] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jan 19 21:46:43 kernel: [    0.908512] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908512] Allocate Port Service[0000:00:1c.1:pcie00]
Jan 19 21:46:43 kernel: [    0.908512] PCI: Setting latency timer of device 0000:00:1c.2 to 64
Jan 19 21:46:43 kernel: [    0.908512] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908512] Allocate Port Service[0000:00:1c.2:pcie00]
Jan 19 21:46:43 kernel: [    0.908512] PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 19 21:46:43 kernel: [    0.908512] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908512] Allocate Port Service[0000:00:1c.3:pcie00]
Jan 19 21:46:43 kernel: [    0.908512] PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 19 21:46:43 kernel: [    0.908512] assign_interrupt_mode Found MSI capability
Jan 19 21:46:43 kernel: [    0.908512] Allocate Port Service[0000:00:1c.4:pcie00]
Jan 19 21:46:43 kernel: [    0.908512] Al
Jan 19 21:46:43 kernel: locate Port Service[0000:00:1c.4:pcie02]
Jan 19 21:46:43 kernel: [    0.912477] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support
Jan 19 21:46:43 kernel: [    0.913886] Linux agpgart interface v0.103
Jan 19 21:46:43 kernel: [    0.913949] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan 19 21:46:43 kernel: [    0.914223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 19 21:46:43 kernel: [    0.914880] pnp: the driver 'serial' has been registered
Jan 19 21:46:43 kernel: [    0.915127] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 19 21:46:43 kernel: [    0.915308] serial 00:0a: driver attached
Jan 19 21:46:43 kernel: [    0.916476] brd: module loaded
Jan 19 21:46:43 kernel: [    0.916476] input: Macintosh mouse button emulation as /class/input/input0
Jan 19 21:46:43 kernel: [    0.916476] pnp: the driver 'i8042 kbd' has been registered
Jan 19 21:46:43 kernel: [    0.916476] i8042 kbd 00:07: driver attached
Jan 19 21:46:43 kernel: [    0.916476] pnp: the driver 'i8042 aux' has been registered
 
Old 01-20-2010, 01:29 AM   #4
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
more info

More syslog (the important part)

Code:
Jan 19 21:46:43 kernel: [    0.916476] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan 19 21:46:43 kernel: [    0.916476] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jan 19 21:46:43 kernel: [    0.916476] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 19 21:46:43 kernel: [    0.934379] mice: PS/2 mouse device common for all mice
Jan 19 21:46:43 kernel: [    0.934558] pnp: the driver 'rtc_cmos' has been registered
Jan 19 21:46:43 kernel: [    0.934682] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jan 19 21:46:43 kernel: [    0.934763] rtc0: alarms up to one month, y3k
Jan 19 21:46:43 kernel: [    0.934826] rtc_cmos 00:03: driver attached
Jan 19 21:46:43 kernel: [    0.934939] cpuidle: using governor ladder
Jan 19 21:46:43 kernel: [    0.935001] cpuidle: using governor menu
Jan 19 21:46:43 kernel: [    0.935065] No iBFT detected.
Jan 19 21:46:43 kernel: [    0.935339] TCP cubic registered
Jan 19 21:46:43 kernel: [    0.935401] NET: Registered protocol family 17
Jan 19 21:46:43 kernel: [    0.935807] registered taskstats version 1
Jan 19 21:46:43 kernel: [    0.935986] rtc_cmos 00:03: setting system clock to 2010-01-19 21:46:41 UTC (1263937601)
Jan 19 21:46:43 kernel: [    0.936073] Freeing unused kernel memory: 392k freed
Jan 19 21:46:43 kernel: [    0.964357] input: AT Translated Set 2 keyboard as /class/input/input1
Jan 19 21:46:43 kernel: [    0.998978] ACPI: SSDT C77820F0, 1130 (r1 DpgPmm  P001Ist       11 INTL 20051117)
Jan 19 21:46:43 kernel: [    0.999509] ACPI: SSDT C7783220, 04D5 (r1  PmRef  P001Cst     3001 INTL 20051117)
Jan 19 21:46:43 kernel: [    0.998285] Monitor-Mwait will be used to enter C-1 state
Jan 19 21:46:43 kernel: [    0.998285] Monitor-Mwait will be used to enter C-2 state
Jan 19 21:46:43 kernel: [    0.998285] Monitor-Mwait will be used to enter C-3 state
Jan 19 21:46:43 kernel: [    0.998285] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jan 19 21:46:43 kernel: [    0.998285] ACPI: ACPI0007:00 is registered as cooling_device0
Jan 19 21:46:43 kernel: [    1.003228] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Jan 19 21:46:43 kernel: [    1.003535] ACPI: ACPI0007:01 is registered as cooling_device1
Jan 19 21:46:43 kernel: [    1.008042] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
Jan 19 21:46:43 kernel: [    1.008285] ACPI: ACPI0007:02 is registered as cooling_device2
Jan 19 21:46:43 kernel: [    1.010313] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
Jan 19 21:46:43 kernel: [    1.010313] ACPI: ACPI0007:03 is registered as cooling_device3
Jan 19 21:46:43 kernel: [    1.033119] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 19 21:46:43 kernel: [    1.033250] PCI: Setting latency timer of device 0000:00:1a.0 to 64
Jan 19 21:46:43 kernel: [    1.033253] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Jan 19 21:46:43 kernel: [    1.033395] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Jan 19 21:46:43 kernel: [    1.037223] ehci_hcd 0000:00:1a.0: debug port 2
Jan 19 21:46:43 kernel: [    1.040416] PCI: cache line size of 32 is not supported by device 0000:00:1a.0
Jan 19 21:46:43 kernel: [    1.040423] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7cf6000
Jan 19 21:46:43 kernel: [    1.044145] No dock devices found.
Jan 19 21:46:43 kernel: [    1.048474] SCSI subsystem initialized
Jan 19 21:46:43 kernel: [    1.052449] libata version 3.00 loaded.
Jan 19 21:46:43 kernel: [    1.052488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 19 21:46:43 kernel: [    1.053632] usb usb1: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    1.053713] hub 1-0:1.0: USB hub found
Jan 19 21:46:43 kernel: [    1.053778] hub 1-0:1.0: 6 ports detected
Jan 19 21:46:43 kernel: [    1.056429] Floppy drive(s): fd0 is 1.44M
Jan 19 21:46:43 kernel: [    1.073028] FDC 0 is a post-1991 82077
Jan 19 21:46:43 kernel: [    1.081029] Switched to high resolution mode on CPU 3
Jan 19 21:46:43 kernel: [    1.077604] Switched to high resolution mode on CPU 1
Jan 19 21:46:43 kernel: [    1.077682] Switched to high resolution mode on CPU 2
Jan 19 21:46:43 kernel: [    1.077684] Switched to high resolution mode on CPU 0
Jan 19 21:46:43 kernel: [    1.081597] Marking TSC unstable due to TSC halts in idle
Jan 19 21:46:43 kernel: [    1.157969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 19 21:46:43 kernel: [    1.157969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 19 21:46:43 kernel: [    1.157969] usb usb1: Product: EHCI Host Controller
Jan 19 21:46:43 kernel: [    1.157969] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
Jan 19 21:46:43 kernel: [    1.157969] usb usb1: SerialNumber: 0000:00:1a.0
Jan 19 21:46:43 kernel: [    1.157976] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jan 19 21:46:43 kernel: [    1.157976] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jan 19 21:46:43 kernel: [    1.157976] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Jan 19 21:46:43 kernel: [    1.157976] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jan 19 21:46:43 kernel: [    1.162397] ehci_hcd 0000:00:1d.0: debug port 2
Jan 19 21:46:43 kernel: [    1.162470] PCI: cache line size of 32 is not supported by device 0000:00:1d.0
Jan 19 21:46:43 kernel: [    1.162481] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7cfc000
Jan 19 21:46:43 kernel: [    1.180547] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 19 21:46:43 kernel: [    1.185265] usb usb2: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    1.185371] hub 2-0:1.0: USB hub found
Jan 19 21:46:43 kernel: [    1.185445] hub 2-0:1.0: 8 ports detected
Jan 19 21:46:43 kernel: [    1.290475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jan 19 21:46:43 kernel: [    1.290475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 19 21:46:43 kernel: [    1.290475] usb usb2: Product: EHCI Host Controller
Jan 19 21:46:43 kernel: [    1.290475] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
Jan 19 21:46:43 kernel: [    1.290475] usb usb2: SerialNumber: 0000:00:1d.0
Jan 19 21:46:43 kernel: [    1.290475] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Jan 19 21:46:43 kernel: [    1.290475] PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 19 21:46:43 kernel: [    1.343571] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f7def800-f7deffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Jan 19 21:46:43 kernel: [    1.350667] ahci 0000:02:00.0: version 3.0
Jan 19 21:46:43 kernel: [    1.350667] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Jan 19 21:46:43 kernel: [    1.405975] usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan 19 21:46:43 kernel: [    1.537994] usb 1-1: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    1.538225] hub 1-1:1.0: USB hub found
Jan 19 21:46:43 kernel: [    1.538371] hub 1-1:1.0: 6 ports detected
Jan 19 21:46:43 kernel: [    1.641093] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
Jan 19 21:46:43 kernel: [    1.641166] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 19 21:46:43 kernel: [    1.882956] usb 2-1: new high speed USB device using ehci_hcd and address 2
Jan 19 21:46:43 kernel: [    2.014783] usb 2-1: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    2.014980] hub 2-1:1.0: USB hub found
Jan 19 21:46:43 kernel: [    2.015267] hub 2-1:1.0: 8 ports detected
Jan 19 21:46:43 kernel: [    2.122111] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
Jan 19 21:46:43 kernel: [    2.122111] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 19 21:46:43 kernel: [    2.320704] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Jan 19 21:46:43 kernel: [    2.357261] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Jan 19 21:46:43 kernel: [    2.357357] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
Jan 19 21:46:43 kernel: [    2.357438] PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 19 21:46:43 kernel: [    2.361332] scsi0 : ahci
Jan 19 21:46:43 kernel: [    2.361332] ata1: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 19
Jan 19 21:46:43 kernel: [    2.413272] usb 1-1.1: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    2.413418] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5406
Jan 19 21:46:43 kernel: [    2.413418] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 19 21:46:43 kernel: [    2.413418] usb 1-1.1: Product: U3 Cruzer Micro
Jan 19 21:46:43 kernel: [    2.413418] usb 1-1.1: Manufacturer: SanDisk Corporation
Jan 19 21:46:43 kernel: [    2.413418] usb 1-1.1: SerialNumber: 0000186265748226
Jan 19 21:46:43 kernel: [    2.443217] Initializing USB Mass Storage driver...
Jan 19 21:46:43 kernel: [    2.626634] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
Jan 19 21:46:43 kernel: [    2.639726] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[008f13007e850700]
Jan 19 21:46:43 kernel: [    2.697128] ata1: SATA link down (SStatus 0 SControl 300)
Jan 19 21:46:43 kernel: [    2.754011] usb 1-1.2: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    2.758762] usb 1-1.2: New USB device found, idVendor=1737, idProduct=0071
Jan 19 21:46:43 kernel: [    2.758762] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 19 21:46:43 kernel: [    2.758762] usb 1-1.2: Produ
Jan 19 21:46:43 kernel: ct: Dual-Band Wireless-N USB Network Adapter
Jan 19 21:46:43 kernel: [    2.758762] usb 1-1.2: Manufacturer: Cisco-Linksys LLC
Jan 19 21:46:43 kernel: [    2.956259] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
Jan 19 21:46:43 kernel: [    3.053624] usb 2-1.1: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    3.054161] usb 2-1.1: New USB device found, idVendor=047d, idProduct=102d
Jan 19 21:46:43 kernel: [    3.054239] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 19 21:46:43 kernel: [    3.054330] usb 2-1.1: Product: Kensington USB/PS2 Wheel Mouse
Jan 19 21:46:43 kernel: [    3.054404] usb 2-1.1: Manufacturer: Kensington     
Jan 19 21:46:43 kernel: [    3.259600] usb 2-1.2: new high speed USB device using ehci_hcd and address 4
Jan 19 21:46:43 kernel: [    3.363815] usb 2-1.2: configuration #1 chosen from 1 choice
Jan 19 21:46:43 kernel: [    3.369332] usb 2-1.2: New USB device found, idVendor=0bc2, idProduct=3000
Jan 19 21:46:43 kernel: [    3.369332] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 19 21:46:43 kernel: [    3.369332] usb 2-1.2: Product: FreeAgentDesktop
Jan 19 21:46:43 kernel: [    3.369332] usb 2-1.2: Manufacturer: Seagate
Jan 19 21:46:43 kernel: [    3.369332] usb 2-1.2: SerialNumber:             6RY0FFSQ
Jan 19 21:46:43 kernel: [    3.374393] scsi1 : SCSI emulation for USB Mass Storage devices
Jan 19 21:46:43 kernel: [    3.374393] usb-storage: device found at 3
Jan 19 21:46:43 kernel: [    3.374393] usb-storage: waiting for device to settle before scanning
Jan 19 21:46:43 kernel: [    3.374602] scsi2 : SCSI emulation for USB Mass Storage devices
Jan 19 21:46:43 kernel: [    3.374765] usb-storage: device found at 4
Jan 19 21:46:43 kernel: [    3.374765] usb-storage: waiting for device to settle before scanning
Jan 19 21:46:43 kernel: [    3.374602] usbcore: registered new interface driver usb-storage
Jan 19 21:46:43 kernel: [    3.374765] usbcore: registered new interface driver hiddev
Jan 19 21:46:43 kernel: [    3.374602] USB Mass Storage support registered.
Jan 19 21:46:43 kernel: [    3.378103] input: Kensington      Kensington USB/PS2 Wheel Mouse as /class/input/input2
Jan 19 21:46:43 kernel: [    3.400457] input,hidraw0: USB HID v1.10 Mouse [Kensington      Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1d.0-1.1
Jan 19 21:46:43 kernel: [    3.401992] usbcore: registered new interface driver usbhid
Jan 19 21:46:43 kernel: [    3.401992] usbhid: v2.6:USB HID core driver
Jan 19 21:46:44 frontend: Setting debconf/priority to low
Jan 19 21:46:44 kernel: [    3.912205] vga16fb: initializing
Jan 19 21:46:44 kernel: [    3.912205] vga16fb: mapped to 0xffff8100000a0000
Jan 19 21:46:44 kernel: [    4.126757] Console: switching to colour frame buffer device 80x30
Jan 19 21:46:44 kernel: [    4.137680] fb0: VGA16 VGA frame buffer device
Jan 19 21:46:44 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jan 19 21:46:44 init: init: starting pid 1543, tty '': '/sbin/reopen-console /sbin/debian-installer'
Jan 19 21:46:44 init: init: starting pid 1546, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Jan 19 21:46:45 debconf: Setting debconf/language to en
Jan 19 21:46:45 main-menu[1566]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Jan 19 21:46:45 main-menu[1566]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Jan 19 21:46:48 kernel: [    8.416836] usb-storage: device scan complete
Jan 19 21:46:48 kernel: [    8.418806] scsi 1:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  4.04 PQ: 0 ANSI: 2
Jan 19 21:46:48 kernel: [    8.423016] usb-storage: device scan complete
Jan 19 21:46:48 kernel: [    8.423016] scsi 2:0:0:0: Direct-Access     Seagate  FreeAgentDesktop 100D PQ: 0 ANSI: 4
Jan 19 21:46:48 kernel: [    8.428685] Driver 'sd' needs updating - please use bus_type methods
Jan 19 21:46:48 kernel: [    8.433308] sd 1:0:0:0: [sda] 8027793 512-byte hardware sectors (4110 MB)
Jan 19 21:46:48 kernel: [    8.433790] sd 1:0:0:0: [sda] Write Protect is off
Jan 19 21:46:48 kernel: [    8.433790] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
Jan 19 21:46:48 kernel: [    8.433790] sd 1:0:0:0: [sda] Assuming drive cache: write through
Jan 19 21:46:48 kernel: [    8.437152] sd 1:0:0:0: [sda] 8027793 512-byte hardware sectors (4110 MB)
Jan 19 21:46:48 kernel: [    8.438737] sd 1:0:0:0: [sda] Write Protect is off
Jan 19 21:46:48 kernel: [    8.438737] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00
Jan 19 21:46:48 kernel: [    8.438737] sd 1:0:0:0: [sda] Assuming drive cache: write through
Jan 19 21:46:48 kernel: [    8.438737]  sda:
Jan 19 21:46:48 kernel: 
Jan 19 21:46:48 kernel: [    8.439497] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan 19 21:46:48 kernel: [    8.441067] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Jan 19 21:46:48 kernel: [    8.444013] sd 2:0:0:0: [sdb] Write Protect is off
Jan 19 21:46:48 kernel: [    8.444013] sd 2:0:0:0: [sdb] Mode Sense: 1c 00 00 00
Jan 19 21:46:48 kernel: [    8.444013] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Jan 19 21:46:48 kernel: [    8.446200] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Jan 19 21:46:48 kernel: [    8.448643] sd 2:0:0:0: [sdb] Write Protect is off
Jan 19 21:46:48 kernel: [    8.448643] sd 2:0:0:0: [sdb] Mode Sense: 1c 00 00 00
Jan 19 21:46:48 kernel: [    8.448643] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Jan 19 21:46:48 kernel: [    8.448643]  sdb:
Jan 19 21:46:48 kernel:  sdb1
Jan 19 21:46:48 kernel: [    8.454674] sd 2:0:0:0: [sdb] Attached SCSI disk
Jan 19 21:47:01 main-menu[1566]: INFO: Falling back to the package description for auto-install
Jan 19 21:47:01 main-menu[1566]: INFO: Falling back to the package description for ai-choosers
Jan 19 21:47:01 main-menu[1566]: INFO: Menu item 'save-logs' selected
 
Old 01-20-2010, 01:30 AM   #5
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
more info

Some sort of package status information

Code:
Package: isofs-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: isofs-modules
Depends: kernel-image-2.6.26-2-amd64-di, nls-core-modules-2.6.26-2-amd64-di, zlib-modules-2.6.26-2-amd64-di
Description: ISOFS filesystem support

Package: pata-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: pata-modules
Depends: kernel-image-2.6.26-2-amd64-di, ata-modules-2.6.26-2-amd64-di
Description: PATA drivers

Package: cdrom-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: cdrom-core-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, ide-modules-2.6.26-2-amd64-di, isofs-modules-2.6.26-2-amd64-di
Description: CDROM support

Package: preseed-common
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb, di-utils (>= 1.58)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.07
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.59)
Description: tiny dpkg clone

Package: input-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: input-modules
Depends: kernel-image-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: Input devices support

Package: localechooser
Status: install ok unpacked
Version: 2.09
Depends: cdebconf-udeb (>= 0.129)
Description: choose language/country/locale
Installer-Menu-Item: 1000

Package: scsi-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core SCSI subsystem

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.7-18
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.15
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 94000

Package: lowmemcheck
Status: install ok unpacked
Version: 1.30
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok unpacked
Version: 1.18
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.28
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.65
Depends: cdebconf-udeb, di-utils (>= 1.62)
Description: Execute a shell
Installer-Menu-Item: 95000

Package: firewire-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: firewire-core-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, crc-modules-2.6.26-2-amd64-di
Description: Core FireWire drivers

Package: di-utils
Status: install ok unpacked
Version: 1.65
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: mmc-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: mmc-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: MMC/SD card modules

Package: uinput-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: uinput-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: uinput support

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb, di-utils-terminfo, libc6-udeb (>= 2.7-1), libnewt0.52, libslang2-udeb (>= 2.0.7-1)
Description: Newt frontend for Debian Configuration Management System

Package: dhcp3-client-udeb
Status: install ok unpacked
Version: 3.1.1-6+lenny3
Depends: libc6-udeb (>= 2.7-1)
Description: DHCP Client for debian-installer

Package: kernel-image-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.4-1
Depends: libc6 (>= 2.7-1)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok unpacked
Version: 1.73
Depends: di-utils (>= 1.43), udev-udeb (>= 0.125-6), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: floppy-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: floppy-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Floppy driver

Package: udev-udeb
Status: install ok unpacked
Version: 0.125-7+lenny3
Depends: libc6-udeb (>= 2.7-1)
Description: /dev/ and hotplug management daemon

Package: serial-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: serial-modules
Depends: kernel-image-2.6.26-2-amd64-di, pcmcia-modules-2.6.26-2-amd64-di
Description: Serial drivers

Package: brltty-udeb
Status: install ok unpacked
Version: 3.10~r3724-1+lenny1
Depends: libc6-udeb (>= 2.7-1)
Description: Access software for a blind person using a braille display

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.9-1
Depends: libc6 (>= 2.7-1)
Description: Free Implementation of the Unicode BiDi algorithm

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-6
Depends: libc6 (>= 2.7-1)
Description: text-wrapping library with i18n - runtime udeb

Package: auto-install
Status: install ok unpacked
Version: 1.2
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 1900

Package: parport-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: parport-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Parallel port support

Package: rescue-check
Status: install ok unpacked
Version: 1.19
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 2.0.7-4
Provides: editor
Depends: libc6-udeb (>= 2.7-1), libslang2-udeb (>= 2.0.7-1)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.138lenny3
Provides: debconf-2.0
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 1.2
Depends: keyboard-setup, localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 2200

Package: fb-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: fb-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Frame buffer support

Package: load-cdrom
Status: install ok unpacked
Version: 1.18
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 1600

Package: sata-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: sata-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, ata-modules-2.6.26-2-amd64-di
Description: SATA drivers

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb, libc6-udeb (>= 2.7-1)
Description: Plain text frontend for Debian Configuration Management System

Package: nls-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: nls-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core NLS support

Package: usb-serial-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-serial-modules
Depends: kernel-image-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: USB serial drivers

Package: fat-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: fat-modules
Depends: kernel-image-2.6.26-2-amd64-di, nls-core-modules-2.6.26-2-amd64-di
Description: FAT filesystem support

Package: scsi-common-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-common-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, cdrom-core-modules-2.6.26-2-amd64-di
Description: Very common SCSI drivers

Package: ethdetect
Status: install ok unpacked
Version: 1.71
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 1700

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.10.2-2
Depends: libc6-udeb (>= 2.7-1)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.41
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: zlib-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: zlib-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: zlib modules

Package: libiw29-udeb
Status: install ok unpacked
Version: 29-1.1
Depends: libc6-udeb (>= 2.7-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: archdetect
Status: install ok unpacked
Version: 1.71
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61)
Description: Hardware architecture detector

Package: scsi-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, scsi-common-modules-2.6.26-2-amd64-di, parport-modules-2.6.26-2-amd64-di, cdrom-core-modules-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: SCSI drivers

Package: ide-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ide-modules
Depends: kernel-image-2.6.26-2-amd64-di, ide-core-modules-2.6.26-2-amd64-di
Description: IDE drivers

Package: save-logs
Status: install ok unpacked
Version: 2.38
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 94000

Package: acpi-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: acpi-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: ACPI support modules

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.65
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 99500

Package: crc-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: crc-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: CRC modules

Package: anna
Status: install ok unpacked
Version: 1.33
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-5
Depends: libc6-udeb (>= 2.7-1)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-4
Depends: udev-udeb, libc6 (>= 2.6-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:3.0.0-6
Depends: libc6-udeb (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok unpacked
Version: 2:1.07-11
Provides: console-keymaps
Depends: cdebconf-udeb
Description: keymaps for PC-style (PS/2 and AT) keyboards

Package: pcmcia-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: pcmcia-modules
Depends: kernel-image-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: Common PCMCIA drivers

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.65
Description: Terminfo entries needed by newt/slang in debian installer

Package: core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core modules

Package: hw-detect
Status: install ok unpacked
Version: 1.71
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok unpacked
Version: 1.45
Provides: keyboard-setup
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 1200

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.61
Depends: libc6-udeb (>= 2.7-1)
Description: Library of common debian-installer functions

Package: usb-storage-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-storage-modules
Depends: kernel-image-2.6.26-2-amd64-di, ide-core-modules-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: USB storage support

Package: media-retriever
Status: install ok unpacked
Version: 1.19
Provides: retriever
Depends: cdebconf-udeb, mountmedia
Description: Fetches modules from removable media

Package: installation-locale
Status: install ok unpacked
Version: 1.3
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.41
Description: debconf preseeding via environment variables

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 93000

Package: netcfg
Status: install ok unpacked
Version: 1.46
Provides: configured-network
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), libiw29-udeb (>= 28+29pre7), dhcp3-client-udeb (>= 3.1.0-2), ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 1800

Package: file-preseed
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 1400

Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3.3.dfsg-12
Description: compression library - runtime for Debian installer

Package: usb-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: USB support

Package: pcmcia-storage-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.26-2-amd64-di, ide-core-modules-2.6.26-2-amd64-di, cdrom-core-modules-2.6.26-2-amd64-di, pcmcia-modules-2.6.26-2-amd64-di, ata-modules-2.6.26-2-amd64-di
Description: PCMCIA storage drivers

Package: libdebconfclient0-udeb
Status: install ok unpacked
Version: 0.138lenny3
Depends: libc6-udeb (>= 2.7-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: mountmedia
Status: install ok unpacked
Version: 0.18
Depends: di-utils (>= 1.48)
Description: Mounts media media

Package: ide-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ide-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: IDE support

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-2
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: cdrom-detect
Status: install ok unpacked
Version: 1.30
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.48)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 1300

Package: ata-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ata-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di
Description: ATA disk modules

Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20090123lenny4
Description: debian installation image
I have also tried appending 'generic.all_generic_ide=1 ircpoll' to the boot parameters, and the system hangs on boot-up. The two drives you se in syslog (sda and sdb) are not the drive I want to install the operating system to. One is a USB drive (4 gig) and the other is an external hard drive for storage. Any help would be greatly appreciated, and I am more than willing to run any tests or divulge whatever information you want about the system.
 
Old 01-20-2010, 02:33 PM   #6
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
update

I have found a way so that the hard drive can be seen by the install. For anyone else having problems, I went into the BIOS under Advanced->Storage Configuration and changed SATA Operation Mode to ACHI (previously IDE).

I am still currently seeking a solution for my DVD drive.
 
Old 01-20-2010, 03:22 PM   #7
thorkelljarl
Senior Member
 
Registered: Jun 2008
Posts: 1,742

Rep: Reputation: 196Reputation: 196
The BIOS again...

Is the DVD recognized by the BIOS and does it show on the screen at POST? Have you checked that you have set the DVD jumper for the cable connection? Are all the cables correctly installed?

Can you boot a linux live-cd and an installation DVD from the drive?
 
Old 01-21-2010, 12:11 PM   #8
Byrnascus
LQ Newbie
 
Registered: Jul 2006
Location: US
Distribution: Debian
Posts: 12

Original Poster
Rep: Reputation: 0
the DVD drive

The dvd drive is recognized by the bios, and a Linux live CD will boot, but will eventually crash when it takes over control of reading the DVD (loading the kernel). The windows installer had no problem with it, and it works fine in Windows 7. I've used the DVD drive in an older desktop, and it works with Debian/Slackware/Windows XP. I have a feeling it has to do with the motherboard, but not sure where to take it from there.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to install Debian from a SATA DVD-ROM drive ratilio Linux - Newbie 9 07-15-2008 02:37 AM
Clone a dual booting IDE hard drive to a SATA hard drive namida12 Linux - Distributions 1 07-14-2008 11:01 AM
install xp on ide drive, ubuntu on sata drive abrahammer Ubuntu 5 07-30-2007 12:57 AM
Ubuntu 7.0.4 install failed due to no hard drive detected koheesio Ubuntu 3 05-28-2007 07:00 AM
Hard drive no longer detected after failed Ubuntu install Peepsalot Linux - Hardware 9 05-29-2006 11:52 PM


All times are GMT -5. The time now is 02:05 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration