LinuxQuestions.org - i810 dual head

ok so I have edited by xorg for dual head as shown

Quote:

Section "ServerFlags"
Option "DefaultServerLayout" "single head configuration"
#Option "DefaultServerLayout" "Double Separate Desktop 1024 Layout"
EndSection

# two screens with two desktop, external 1280x1024
Section "ServerLayout"
Identifier "Double Separate Desktop 1024 Layout"
Screen 0 "Screen0" Below "Screen1"
Screen 1 "Screen1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "Synaptics" "AlwaysCore"
Option "Xinerama" "true"
Option "Clone" "off"
EndSection

Section "ServerLayout"

Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "AlwaysCore"
EndSection

Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/TTF/"
EndSection

Section "Module"
Load "dri"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "6 7"
Option "Buttons" "7"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
#Option "FingerLow" "14"
#Option "FingerHigh" "15"
Option "MaxTapMove" "110"
#Option "VertScrollDelta" "50"
#Option "HorizScrollDelta" "20"
Option "MinSpeed" ".5"
Option "MaxSpeed" "5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Generic VGA Monitor"
HorizSync 27 - 96
VertRefresh 50 - 160
VertRefresh 60
DisplaySize 347 260
Option "DPMS"
Modeline "1024x768_60.00" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection

Section "Device"
Identifier "Device0"
Driver "i810"
BusID "PCI:0:2:0"
Screen 0
Option "MonitorLayout" "CRT,LFP"
VendorName "Intel"
Option "NoAccel" "false"
Option "DRI" "true"
VideoRam 16384

EndSection

Section "Device"
Identifier "Dual VGAOUT Device"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
Option "MonitorLayout" "CRT,LFP"

# Option "DDC" "false"
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Dual VGAOUT Device"
Monitor "Generic VGA Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
Virtual 1024 768
EndSubSection
EndSection

I receive the errors below and am not sure how to fix this. Dual Head with the i810 is said to be possible and it seems that I am close, but something is still wrong.

Quote:

(EE) I810(0): Failed to switch to monitor configuration (0x108)
(EE) I810(0): Please check the devices specified in your MonitorLayout
(EE) I810(0): is configured correctly.
(EE) I810(1): Failed to setup second head due to primary head failure.
(EE) Screen(s) found, but none have a usable configuration.

Thanks