I couldn't hear any sound from my system.
I use asus p4pe mainboard but i couldn't make the soundcard work
i use dmesg check if my system can identify it
i get the message as following

-------------------------------------------------------------------------------------------------
Intel 810 + AC97 Audio, version 0.24, 17:59:48 Mar 13 2003
PCI: Found IRQ 6 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x9400 and 0x9800, MEM 0xe9800000 and 0xe9000000, IRQ 6
i810: Intel ICH4 mmio at 0xf09d5000 and 0xf09d7000
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS112 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
Intel 810 + AC97 Audio, version 0.24, 17:59:48 Mar 13 2003
PCI: Found IRQ 6 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x9400 and 0x9800, MEM 0xe9800000 and 0xe9000000, IRQ 6
i810: Intel ICH4 mmio at 0xf09d5000 and 0xf09d7000
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS112 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
Intel 810 + AC97 Audio, version 0.24, 17:59:48 Mar 13 2003
PCI: Found IRQ 6 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x9400 and 0x9800, MEM 0xe9800000 and 0xe9000000, IRQ 6
i810: Intel ICH4 mmio at 0xf09d5000 and 0xf09d7000
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS112 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
------------------------------------------------------------------------------------------------
i use M$ test may soundcard is OK
but it could not work at my RH9
what shall i do

any one have idea?

Thanks
Exper

Hi,

On my Debian system (using kernel 2.4.22) I had the same problem.
But then last night, I tried switching around with the jacks, now it works!
Speakers: pink (mic) - For some weird reason the sound IS in STEREO
Line in: blue

The "Speech POST Reporter" doesn't work after this, but who wants that noise anyway?

I Don't know, why it works (maybe it's ASUS's implementation of the Intel Audio chip or something - or in connection with the kernel module...) switching the jacks, but hey - it works...

But there is no mic in...

Peace!
Carsten B. Jensen

If you guys haven't fried your motherboards yet, you need to go to http://www.alsa-project.org/ and get the drivers and install ALSA for your sound. There is another post in LQ where the mic jack being used was discussed, and someone who had fried their motherboard doing this posted it.

I have the P4PE motherboard, and the onboard soundchip will even work in 5.1 mode. However, you need to install the ALSA drivers for it to work.

Get the first three files off the ALSA home page (driver, library, utilities) and then follow the instructions here http://www.alsa-project.org/alsa-doc...odule=intel8x0 verbatim. If you do, you'll get sound with the speakers plugged into the proper jacks. I hope you still get notice of a post to this thread.