HUAWEI ETS2056 being reported as a loopback serial
 

Hi guys,

I have an Huawei ETS2056 (CDMA wireless phone) which has got a cable for connecting with the PC.
The cable is an Texas Instruments 3410/5052 Serial Converter (correspond to kernel module ti_usb_3410_5052, which is correctly detected under Linux. I have setup all things (including UDEV, and the ti_usb_3410_5052 hotplug script).

When I plug it to the PC, it appears correctly as /dev/usb/ttyUSB0 (through a UDEV rule, I renamed it to be usb/%k for use with KPPP) after one probe error -5, and responds correctly as a normal modem.

But here is the problem. When I dial, it never connects, and when I use a special number (provided by my ISP for connecting with the CDMA phone, and is working correctly under Windows), it seems to work, but it only displays CONNECT, without the connection speed and other codes.
In fact, only the special number works under Windows.
I use KPPP for connecting. After, the CONNECT, pppd dies, and reports an error number 17, which indicates that the serial is a loopback.

I just can't figure out, why is this reported as a loopback, though when I send commands to the modem, it works properly.

I use Kernel 2.6.15.2, and UDEV 094. Everything works properly except this.

I thus need to always log into Windows for Internet usage. Though, I really hate to go into windows, as it is very vulnerable to viruses and trojans.

So, please help me people, if you got any Huawei CDMA modem working properly. All CDMA modems from Huawei seems to be acting the same way, so those of you who are able to connect with it, please let me know your configurations.

Elie Zedeck.

Most CDMA service providers require that Stupid Mode is used. This means that pppd connects immediately without waiting for additional signals from the ISP.
You will also need defaultroute and usepeerdns in your /etc/ppp/options.

In my opinion, KPPP will never work! Use wvdial instead.

same prob...
 

i hav the same prob, but i use wvdial 2 connect nd it works (both on gnome nd kde), although i hav successfully connected from gppp but kppp doesnt work.i was thinking of using gppp on kde but i dont want to do that.

Can u Guide me how to install CDMA modem
 

I have a CDMA modem from Huawei provided by V-Ptcl Pakistan. I wonder if u can help me out with the installation procedure as i am a total newbei to linux and have just recently installed Ubuntu Feisty(its a beta but i did not have any other choice bc of the fact that i have intel 965 board not supported by edgy, mandriva 2007 or fedora core 6) on my system.
Thanks in advance

you will need a few files to make it work so if you want those files i can mail them to you

Definitely i will love to get hold of those files as i am fed up of the OS that i call "Ctrl+Alt+Del every 2 minutes operating system" to surf internet
Thanks in advance

for that you will have to tell me your e-mail address :D

E-Mail address
 

My E-Mail address is
farhadali05@hotmail.com

Huawei Ets2056
 

I am so interested by this files.
Please send me at cpelcerf@gmail.com
Thanks

I am also interested in these files
 

Hi every one..
This is my first post in this forum, though i used the info given here many times.

I am also a newbie to Linux

I use ubuntu 7.10 and Huawe fixed phone and have the same problem so please send me these files too.

My E-mail is taritom@gmail.com
thanks