huawei e1752 mobile broadband dongle
Need a bit of help with this have got the broadband side working lovely on Mandriva linux but it should show as a removable drive in fact in windows it shows as two on linux none its as if there not there.Can anyone point me in rite direction to sort this.
lsusb returnes Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 011: ID 12d1:141b Huawei Technologies Co., Ltd. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub a bit from dmesg usb 1-4: new high speed USB device using ehci_hcd and address 10 usb 1-4: New USB device found, idVendor=12d1, idProduct=1446 usb 1-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4 usb 1-4: Product: HUAWEI Mobile usb 1-4: Manufacturer: HUAWEI Technology usb 1-4: SerialNumber: 1234567890ABCDEF usb 1-4: configuration #1 chosen from 1 choice scsi20 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning scsi21 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning usb 1-4: usbfs: process 12219 (usb_modeswitch) did not claim interface 0 before use usb 1-4: USB disconnect, address 10 usb 1-4: new high speed USB device using ehci_hcd and address 11 usb 1-4: New USB device found, idVendor=12d1, idProduct=141b usb 1-4: New USB device strings: Mfr=3, Product=2, SerialNumber=4 usb 1-4: Product: HUAWEI Mobile usb 1-4: Manufacturer: HUAWEI Technology usb 1-4: SerialNumber: 1234567890ABCDEF usb 1-4: configuration #1 chosen from 1 choice option 1-4:1.0: GSM modem (1-port) converter detected usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 option 1-4:1.1: GSM modem (1-port) converter detected usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 scsi24 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 11 usb-storage: waiting for device to settle before scanning scsi 24:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 sd 24:0:0:0: Attached scsi generic sg2 type 0 sd 24:0:0:0: [sdb] Attached SCSI removable disk usb-storage: device scan complete it sort of see but it just is not available normally removable drives just come up |
My huawie E220 and E620 both use the option module.
I also have binfmt_misc and usbserial, are closely related to the modem usb_storage, My E620 has a whole 38Mb of un-writable memory (at least to me) you could add "option" to the file /etc/modprobe.preload The rest is configured by the network manager, either kde or Mandrive MCC (configure your computer) You will need to reboot. in /etc/modprobe.conf, well, it used to be there, it is probably built in now, I custom compile my kernels. Use the search function, there's been plenty written about this over the last 2 years. Cheers, and best regards, Glenn |
All times are GMT -5. The time now is 03:31 AM. |