HP A250N 4 in 1 internal card reader

Mr Angry · 01-06-2005, 11:48 PM

First off everything does work, I have configured my system with USB mount and the disks are accessible but only if I run sg_map. That is basically my questions, how can I "skip" typing in sg_map every time I mount one or all of the disks?

info:

Code:

#cat /proc/version
Linux version 2.6.8 (root@water) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Sun Oct 10 20:01:19 EDT 2004

# cat /proc/scsi/scsi
Attached devices:
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor:          Model: USB Reader       Rev: 1.00
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 01
  Vendor:          Model: USB Reader       Rev: 1.01
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 02
  Vendor:          Model: USB Reader       Rev: 1.02
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 03
  Vendor:          Model: USB Reader       Rev: 1.03
  Type:   Direct-Access                    ANSI SCSI revision: 02

#cat /proc/bus/usb/devices
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=058f ProdID=9360 Rev= 1.00
S:  Manufacturer=
S:  Product=USB Reader
S:  SerialNumber=9203111
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms