LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 03-03-2007, 08:40 PM   #1
Elim_Garak
LQ Newbie
 
Registered: Jul 2005
Distribution: Mepis
Posts: 12

Rep: Reputation: 0
Hitachi SATA Hard Drive not showing in Disks List in QTParted


Hello,

I am trying to install Mepis 6.0 from Live CD but my Hitachi SATA drive is not listed in QTParted, it does however see my 300GB removable USB hard drive.

I am installing this on a Dell Inspiron 1501 laptop.

I will paste some of the output they ask for before making a hardware post.

Please forgive the length but I am not sure what exactly from the logs should or should not be included.

If there is anything else I should include, please let me know.



Kernel
------

2.6.15-26-386



lspci
-----


0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37
0000:00:06.0 PCI bridge: ATI Technologies Inc: Unknown device 5a38
0000:00:12.0 IDE interface: ATI Technologies Inc: Unknown device 4380
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4387
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4388
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4389
0000:00:13.3 USB Controller: ATI Technologies Inc: Unknown device 438a
0000:00:13.4 USB Controller: ATI Technologies Inc: Unknown device 438b
0000:00:13.5 USB Controller: ATI Technologies Inc: Unknown device 4386
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4385 (rev 13)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 438c
0000:00:14.2 0403: ATI Technologies Inc: Unknown device 4383
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 438d
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4384
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5975
0000:05:00.0 Network controller: Broadcom Corporation: Unknown device 4311 (rev 01)
0000:08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
0000:08:01.0 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
0000:08:01.1 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)



dmesg
-----

[17179569.184000] Linux version 2.6.15-26-386 (root@mepis-party) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jul 19 12:14:26 EDT 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[17179569.184000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000037e70000 (usable)
[17179569.184000] BIOS-e820: 0000000037e70000 - 0000000037e81000 (ACPI data)
[17179569.184000] BIOS-e820: 0000000037e81000 - 0000000037f00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 894MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f8780
[17179569.184000] On node 0 totalpages: 228976
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 224880 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI present.
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] Intel MultiProcessor Specification v1.4
[17179569.184000] Virtual Wire compatibility mode.
[17179569.184000] OEM ID: AMD Product ID: POOH APIC at: 0xFEE00000
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] I/O APIC #1 Version 33 at 0xFEC00000.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Processors: 1
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: us init=/etc/init apm=power-off vga=normal nomce acpi=off pnpbios=off ide=nodma quiet xdrvr=vesa
[17179569.184000] ide_setup: ide=nodma : Prevented DMA
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[ 0.000000] Detected 1795.801 MHz processor.
[ 27.403168] Using tsc for high-res timesource
[ 27.404048] Console: colour VGA+ 80x25
[ 27.404392] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 27.404881] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.418144] Memory: 901532k/915904k available (2633k kernel code, 13684k reserved, 929k data, 192k init, 0k highmem)
[ 27.418147] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 27.494930] Calibrating delay using timer specific routine.. 3597.85 BogoMIPS (lpj=7195715)
[ 27.494957] Security Framework v1.0.0 initialized
[ 27.494962] SELinux: Disabled at boot.
[ 27.494964] Capability LSM initialized
[ 27.494974] Mount-cache hash table entries: 512
[ 27.495044] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
[ 27.495051] CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
[ 27.495057] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 27.495060] CPU: L2 Cache: 512K (64 bytes/line)
[ 27.495062] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000019
[ 27.495073] mtrr: v2.0 (20020519)
[ 27.495076] CPU: AMD Mobile AMD Sempron(tm) Processor 3500+ stepping 02
[ 27.495080] Enabling fast FPU save and restore... done.
[ 27.495083] Enabling unmasked SIMD FPU exception support... done.
[ 27.495086] Checking 'hlt' instruction... OK.
[ 27.511064] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
[ 27.619456] Freeing initrd memory: 1491k freed
[ 27.620313] ExtINT not setup in hardware but reported by MP table
[ 27.620399] ENABLING IO-APIC IRQs
[ 27.620577] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=0 pin2=2
[ 27.660319] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 27.660362] ...trying to set up timer (IRQ0) through the 8259A ...
[ 27.660364] ..... (found pin 2) ... failed.
[ 27.700108] ...trying to set up timer as Virtual Wire IRQ... works.
[ 27.846967] NET: Registered protocol family 16
[ 27.854720] PCI: BIOS BUG #81[49435024] found
[ 27.854777] PCI: Using configuration type 1
[ 27.855084] ACPI: Subsystem revision 20051216
[ 27.855086] ACPI: Interpreter disabled.
[ 27.855089] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.855095] pnp: PnP ACPI: disabled
[ 27.855096] PnPBIOS: Disabled
[ 27.855182] SCSI subsystem initialized
[ 27.855214] usbcore: registered new driver usbfs
[ 27.855236] usbcore: registered new driver hub
[ 27.855265] PCI: Probing PCI hardware
[ 27.855268] PCI: Probing PCI hardware (bus 00)
[ 27.855956] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 27.856224] Boot video device is 0000:01:05.0
[ 27.856804] PCI: Transparent bridge - 0000:00:14.4
[ 27.862573] PCI: Using IRQ router default [1002/4385] at 0000:00:14.0
[ 27.862583] PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 193
[ 27.862587] PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 153
[ 27.862591] PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 161
[ 27.862595] PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 169
[ 27.862599] PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 161
[ 27.862603] PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 169
[ 27.862607] PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 177
[ 27.862613] PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 153
[ 27.862617] PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 153
[ 27.862626] PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 169
[ 27.862631] PCI->APIC IRQ transform: 0000:08:00.0[A] -> IRQ 185
[ 27.862635] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 27.862638] PCI->APIC IRQ transform: 0000:08:01.0[C] -> IRQ 153
[ 27.862642] PCI: using PPB 0000:00:14.4[C] to get irq 16
[ 27.862645] PCI->APIC IRQ transform: 0000:08:01.1[C] -> IRQ 153
[ 27.862650] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 27.862693] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 27.862971] PCI: Bridge: 0000:00:01.0
[ 27.862974] IO window: 9000-9fff
[ 27.862977] MEM window: c0100000-c01fffff
[ 27.862981] PREFETCH window: c8000000-cfffffff
[ 27.862983] PCI: Bridge: 0000:00:05.0
[ 27.862985] IO window: disabled.
[ 27.862987] MEM window: disabled.
[ 27.862990] PREFETCH window: disabled.
[ 27.862992] PCI: Bridge: 0000:00:06.0
[ 27.862994] IO window: disabled.
[ 27.862997] MEM window: c0200000-c02fffff
[ 27.863000] PREFETCH window: disabled.
[ 27.863003] PCI: Bridge: 0000:00:14.4
[ 27.863004] IO window: disabled.
[ 27.863010] MEM window: c0300000-c03fffff
[ 27.863014] PREFETCH window: disabled.
[ 27.863030] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 27.863037] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 27.863094] Machine check exception polling timer started.
[ 27.863634] audit: initializing netlink socket (disabled)
[ 27.863641] audit(1172955669.748:1): initialized
[ 27.863713] VFS: Disk quotas dquot_6.5.1
[ 27.863729] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.863777] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[ 27.863805] NTFS driver 2.1.25 [Flags: R/W].
[ 27.863817] Registering unionfs 1.1.2
[ 27.863847] Initializing Cryptographic API
[ 27.863851] io scheduler noop registered
[ 27.863856] io scheduler anticipatory registered
[ 27.863860] io scheduler deadline registered
[ 27.863871] io scheduler cfq registered
[ 28.118716] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 28.118720] pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
[ 28.118740] assign_interrupt_mode Found MSI capability
[ 28.118772] Allocate Port Service[pcie00]
[ 28.118795] Allocate Port Service[pcie02]
[ 28.118819] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 28.118822] pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
[ 28.118841] assign_interrupt_mode Found MSI capability
[ 28.118866] Allocate Port Service[pcie00]
[ 28.118884] Allocate Port Service[pcie02]
[ 28.118976] isapnp: Scanning for PnP cards...
[ 28.473371] isapnp: No Plug & Play device found
[ 28.483444] Non-volatile memory driver v1.2
[ 28.483527] PNP: No PS/2 controller found. Probing ports directly.
[ 28.493593] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.494174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.494202] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 28.495898] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.496022] loop: loaded (max 8 devices)
[ 28.496080] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.496083] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 28.496692] Probing IDE interface ide0...
[ 29.358397] hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
[ 30.029693] Probing IDE interface ide1...
[ 30.589421] Probing IDE interface ide2...
[ 31.149150] Probing IDE interface ide3...
[ 31.708879] Probing IDE interface ide4...
[ 32.268609] Probing IDE interface ide5...
[ 32.828355] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 32.836021] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 32.836027] Uniform CD-ROM driver Revision: 3.20
[ 32.860897] libata version 1.20 loaded.
[ 32.861157] Driver 'sd' needs updating - please use bus_type methods
[ 32.861204] ieee1394: Initialized config rom entry `ip1394'
[ 32.861245] ieee1394: raw1394: /dev/raw1394 device initialized
[ 32.861261] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 32.861264] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 32.861266] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 32.861281] usbmon: debugfs is not available
[ 32.861321] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 32.861361] ehci_hcd 0000:00:13.5: debug port 1
[ 32.861407] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 32.861414] ehci_hcd 0000:00:13.5: irq 177, io mem 0xc0004400
[ 32.862725] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.862820] hub 1-0:1.0: USB hub found
[ 32.862831] hub 1-0:1.0: 10 ports detected
[ 32.964321] Initializing USB Mass Storage driver...
[ 33.204160] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 33.338853] scsi0 : SCSI emulation for USB Mass Storage devices
[ 33.338890] usb-storage: device found at 2
[ 33.338893] usb-storage: waiting for device to settle before scanning
[ 33.338899] usbcore: registered new driver usb-storage
[ 33.338901] USB Mass Storage support registered.
[ 33.338936] mice: PS/2 mouse device common for all mice
[ 33.338976] NET: Registered protocol family 2
[ 33.376115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 33.376280] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.378795] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.378997] TCP: Hash tables configured (established 131072 bind 65536)
[ 33.379000] TCP reno registered
[ 33.379071] ip_tables: (C) 2000-2002 Netfilter core team
[ 33.381897] input: AT Translated Set 2 keyboard as /class/input/input0
[ 33.416056] TCP bic registered
[ 33.416068] NET: Registered protocol family 1
[ 33.416075] NET: Registered protocol family 8
[ 33.416077] NET: Registered protocol family 20
[ 33.416096] Using IPI Shortcut mode
[ 33.416154] RAMDISK: Compressed image found at block 0
[ 33.533691] EXT2-fs warning: checktime reached, running e2fsck is recommended
[ 33.533708] VFS: Mounted root (ext2 filesystem).
[ 38.336343] Vendor: ST332082 Model: 0A Rev: 0000
[ 38.336351] Type: Direct-Access ANSI SCSI revision: 00
[ 38.337201] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 38.337204] sda: assuming drive cache: write through
[ 38.337951] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 38.337953] sda: assuming drive cache: write through
[ 38.337955] sda: sda1 sda2 sda3
[ 38.352024] sd 0:0:0:0: Attached scsi disk sda
[ 38.352072] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 38.352211] usb-storage: device scan complete
[ 43.669348] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 43.669551] Unable to load NLS charset cp437
[ 43.669678] Unable to load NLS charset cp437
[ 43.714911] ISO 9660 Extensions: RRIP_1991A
[ 56.638313] Freeing unused kernel memory: 192k freed
[ 68.718387] Linux agpgart interface v0.101 (c) Dave Jones
[ 68.811765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 68.922354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 69.149854] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 69.149902] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 69.425015] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 69.425027] ohci_hcd 0000:00:13.0: irq 153, io mem 0xc0005000
[ 69.478799] hub 2-0:1.0: USB hub found
[ 69.478812] hub 2-0:1.0: 2 ports detected
[ 69.582546] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 69.798403] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 69.798414] ohci_hcd 0000:00:13.1: irq 161, io mem 0xc0006000
[ 69.856090] hub 3-0:1.0: USB hub found
[ 69.856103] hub 3-0:1.0: 2 ports detected
[ 69.958377] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 70.189751] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 70.189761] ohci_hcd 0000:00:13.2: irq 169, io mem 0xc0007000
[ 70.240294] sdhci: Secure Digital Host Controller Interface driver, 0.10
[ 70.240298] sdhci: Copyright(c) Pierre Ossman
[ 70.242202] hub 4-0:1.0: USB hub found
[ 70.242213] hub 4-0:1.0: 2 ports detected
[ 70.370226] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 70.622331] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 70.622340] ohci_hcd 0000:00:13.3: irq 161, io mem 0xc0008000
[ 70.678021] hub 5-0:1.0: USB hub found
[ 70.678034] hub 5-0:1.0: 2 ports detected
[ 70.782004] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 70.997848] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 70.997856] ohci_hcd 0000:00:13.4: irq 169, io mem 0xc0009000
[ 71.053950] hub 6-0:1.0: USB hub found
[ 71.053960] hub 6-0:1.0: 2 ports detected
[ 71.161701] Broadcom 4401 Ethernet Driver bcm4400 ver. 3.0.7 (10/31/03)
[ 71.165524] eth0: Broadcom BCM4401-B0 100Base-T found at mem c0300000, IRQ 185, node addr 0019b9511a7c
[ 71.216528] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
[ 71.226715] sdhci: ============== REGISTER DUMP ==============
[ 71.226721] sdhci: Sys addr: 0x00000000 | Version: 0x00000200
[ 71.226727] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 71.226732] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 71.226738] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 71.226743] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 71.226748] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[ 71.226754] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 71.226759] sdhci: Int enab: 0xe1ff00cf | Sig enab: 0xe1ff00cf
[ 71.226765] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 71.226771] sdhci: Caps: 0x018021a1 | Max curr: 0x00000040
[ 71.226773] sdhci: ===========================================
[ 71.280466] mmc0: SDHCI at 0xc0302800 irq 153 DMA
[ 71.376737] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 72.796103] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 72.796108] md: bitmap version 4.39
[ 73.273150] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 73.718941] NET: Registered protocol family 17
[ 75.154296] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 75.164252] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x18 (950 mV)
[ 75.164255] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x12 (1100 mV)
[ 75.164258] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10 (1150 mV)
[ 75.164262] cpu_init done, current fid 0xa, vid 0x10
[ 75.175709] powernow: This module only works with AMD K7 CPUs
[ 75.338550] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
[ 75.424271] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 76.435034] bcm4400: eth0 NIC Link is Up, 100 Mbps full duplex
[ 78.386092] floppy0: no floppy controllers found
[ 78.632733] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[ 78.635264] usbcore: registered new driver ndiswrapper
[ 84.785007] Adding 976552k swap on /dev/sda2. Priority:1 extents:1 across:976552k
[ 90.637851] capifs: Rev 1.1.2.3
[ 111.178836] lp: driver loaded but no devices found
[ 111.310681] ppdev: user-space parallel port driver
[ 118.857666] apm: BIOS not found.
[ 590.233273] APIC error on CPU0: 00(40)
[ 612.418322] APIC error on CPU0: 40(40)
[ 617.459835] APIC error on CPU0: 40(40)



Any help would be appreciated.

Thanks
 
Old 03-04-2007, 03:07 AM   #2
Simon Bridge
Guru
 
Registered: Oct 2003
Location: Waiheke NZ
Distribution: Ubuntu
Posts: 9,211

Rep: Reputation: 197Reputation: 197
These are the high points:
Quote:
PCI: BUG #81[49435024]

PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0

APIC error on CPU0: 00(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
These last suggest you have APIC problems - set kernel parameter on boot to "noapic, nolapic" and see what happens.

Last edited by Simon Bridge; 03-04-2007 at 03:11 AM.
 
Old 03-04-2007, 01:44 PM   #3
Elim_Garak
LQ Newbie
 
Registered: Jul 2005
Distribution: Mepis
Posts: 12

Original Poster
Rep: Reputation: 0
Thanks Simon, I will try when I get home in a few hours (At work).
 
Old 03-04-2007, 03:20 PM   #4
Simon Bridge
Guru
 
Registered: Oct 2003
Location: Waiheke NZ
Distribution: Ubuntu
Posts: 9,211

Rep: Reputation: 197Reputation: 197
BIOS seems to be spotty setting up PCI ... I guess there is always replacing the BIOS completely

http://linuxbios.org/index.php/Main_Page
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Needed on Installation of Etch on SATA Hard Disks royski_it2004 Debian 4 07-02-2007 08:12 AM
Unable to install RHEL_4 64 bit on AMD64 with 7200 RPM HITACHI SATA II hard drive chandan_smvdu Linux - Enterprise 1 01-31-2007 05:57 PM
Redhat El4 not detecting hitachi deskstar 7K80 SATA drive with ATI controller gemathny Linux - Hardware 0 03-09-2006 12:17 AM
SuSE 9.1, SIS 964 SATA, HItachi 160GB disks, kernel upgrade? fireman949 Linux - Distributions 2 08-31-2004 12:38 AM
no linux on 2,5 inch Hitachi hard drive`? pablovschby Linux - Hardware 0 12-25-2003 08:41 AM


All times are GMT -5. The time now is 12:24 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration