LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Fresh install of Slackware will not load X (http://www.linuxquestions.org/questions/linux-hardware-18/fresh-install-of-slackware-will-not-load-x-330257/)

whited 06-04-2005 09:33 AM

Fresh install of Slackware will not load X
 
The motherboard i am using is an ASUS CUW-AM (which isn't listed at asus.com). I have a socket 370 with a converter on it and a celeron 1.1ghz taulitin, and 192mb of ram. I am using the intergrated graphics and a dell P780 monitor. I just burned the install disks so the a clean. I have tried different types of default color depths. At 8 bits i get a white screen. 16 i get green bars. 24 i get moving green bars. I got my xorg.conf using a flashdisk.


http://home.earthlink.net/~brianbu01/xorg.conf

thank you for any help
brian

Bruce Hill 06-04-2005 09:40 AM

Not much help, probably...what does /sbin/lspci say for your VGA controller?

whited 06-04-2005 01:37 PM

lspci output

00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
01:08.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 31)
01:0a.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3119 (rev 11)


The computer loads X alright whenever I use knoppix. Is there anything that I can use from knoppix to help x load in slackware?

k4be 06-04-2005 01:40 PM

try 'xorgcfg -textmode'

whited 06-04-2005 03:16 PM

thx man i got it up and running


All times are GMT -5. The time now is 09:47 AM.