LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Epson C64 on RH 9.0 (http://www.linuxquestions.org/questions/linux-hardware-18/epson-c64-on-rh-9-0-a-138512/)

mac0439 01-25-2004 03:06 PM

Epson C64 on RH 9.0
 
New to Linux and RH 9.0. Trying to install gimp-print-4.3.25 for my Epson C64. Downloaded .tar.gz to a dir created in home dir. Untarred to same dir. Run ./configure and get the error: no acceptable c compiler found in $PATH.

Have c complier installed on system. What does this error mean/how do I fix it?

jailbait 01-25-2004 06:32 PM

"Have c complier installed on system. What does this error mean/how do I fix it?"

Use this command:
which gcc
to see if the compiler is on the PATH.

Use this command:
rpm -qi gcc
to check that the compiler is installed.

___________________________________
Be prepared. Create a LifeBoat CD.
http://users.rcn.com/srstites/LifeBo...home.page.html

Steve Stites

mac0439 01-26-2004 03:26 PM

I ran the which gcc cmd---not in path
I ran the rpm -qi gcc---not installed

thanks jailbait---I will try to figure the rest out on my own---but I suspect I will be back

jailbait 01-26-2004 05:00 PM

"I ran the rpm -qi gcc---not installed"

You need to install gcc. There should be a rpm for gcc on your Red hat install CD.

___________________________________
Be prepared. Create a LifeBoat CD.
http://users.rcn.com/srstites/LifeBo...home.page.html

Steve Stites

mac0439 01-26-2004 11:21 PM

Decided to start from scratch. I did a "bare bones" install the first time. I am running a duel boot with XP on my laptop to see if it worked. It did so have decided to do a reinstall with the "everything" option. I will then try the printer install again. I will let you know if any more problems crop up. Thanks again jailbait.


All times are GMT -5. The time now is 11:04 AM.