Dual monitor config /got it working
 

Ok, here we go.....
I cant seem to get past the testing part of configureing my dual monitor/dual card setup. When i run "XFree86 -xf86config /root/XF86Config.new" i get both screens up and my mouse moving through both screens, and I do the "ctrl-Alt-backspace" to get back to console my screen1 (of screen0/screen1) turns away from the test color to vertical lines with a blinking cursor and console comes up on screen0. So then i copy the new config "cp /root/XF86Config.new /etc/X11/XF86Config" to where it is supposed to be ( and this is where i get stuck). I dont know how to startx and run both monitors other than "startx -- -multihead" or "startx +xinerama" (I think) and neither of these work, the screen1 stays just like it is after i exit the test screen (vert lines and cursor). I believe when x is starting it's using the XF86Config-4 (which doesnt show anything other than the card0 and monitor0 labled as 1 instead of 0)file instead of the XF86Config file(which shows all cards and monitors...etc).
Mandrake10
card0 is a GF4 mx 4000 64mb PCI
monitor0 is a Samsung SyncMAster 21GLs
card1 is a NVidia TNT2 64 32mb AGP
monitor1 is an AcerView 56e

here's my XF86Config file

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "unix/:-1"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
#DisplaySize 390 290 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "4610"
Option "DPMS"
EndSection

Section "Monitor"
#DisplaySize 270 200 # mm
Identifier "Monitor1"
VendorName "API"
ModelName "4538"
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:0:11:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
Identifier "Card1"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection

Thanks in advance
Tim

jeeez! nothing on this yet?

should I post this again in a different forum? Moderators?

Ok, here's an update....
I messed around enough to get them working (somewhat) but not the way I want them too.
Seems as though i have 2 seperate X's running and not the expanded desktop I was shooting for. I am looking to drag windows from screen to screen, at this point my mouse moves from screen to screen, but i cannot drag windows/programs from screen to screen only open them on either screen. I have pasted my xf86config-4 file for you all to look over and give me some tips to gain what i am looking for.

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 21GLs"
HorizSync 30.0-85.0
VertRefresh 50.0-160.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Acer"
ModelName "Acer 56e"
HorizSync 30.0-69.0
VertRefresh 50.0-110.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device0"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
BusID "PCI:0:11:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "RIVA TNT2"
Driver "nv"
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen0"
Device "device0"
Monitor "monitor0"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 15
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 16
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 24
Virtual 800 600
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout2"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen0" 0 0
Screen "screen1" Rightof "screen0"
EndSection

I am getting close and am happy to receive ANY advise....

"bump"

Got it running, here's the config file incase anyone wants to look at it............
XF86Config-4.....

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 21GLs"
HorizSync 30.0-85.0
VertRefresh 50.0-160.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Acer"
ModelName "Acer 56e"
HorizSync 30.0-69.0
VertRefresh 50.0-110.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device0"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
BusID "PCI:0:11:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "RIVA TNT2"
Driver "nv"
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen0"
Device "device0"
Monitor "monitor0"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 15
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 16
Virtual 800 600
EndSubsection

Subsection "Display"
Depth 24
Virtual 800 600
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout2"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen0" 0 0
Screen "screen1" Rightof "screen0"
Option "Xinerama" "On"
EndSection

or just read the Xinerama-Howto ;-)

like anyone in this forum offered anything??? lol