Dual-head with X: Second (VIA) Head Dead

Dria · 10-23-2006, 06:19 PM

I'm trying to set up a dual-head configuration in Slackware 11.0 2.6.17.13. I'm using a Nvidia Geforce FX 5200 as my primary and a Via Unichrome Pro IGP as the secondary.

lspci:

Code:

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [80] AGP version 3.5
		Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fa000000-fbffffff
	Prefetchable memory behind bridge: f4000000-f7ffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR+ <PERR+
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 Multimedia audio controller: Creative Labs SB Audigy LS
	Subsystem: Creative Labs SB0312 Audigy LS
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at fc00 [size=32]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.1 Input device controller: Creative Labs SB Audigy LS Game Port
	Subsystem: Creative Labs SB0312 Audigy LS MIDI/Game port
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at f800 [size=8]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
	Subsystem: Chaintech Computer Co. Ltd Unknown device 194d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at f400 [size=8]
	Region 1: I/O ports at f000 [size=4]
	Region 2: I/O ports at ec00 [size=8]
	Region 3: I/O ports at e800 [size=4]
	Region 4: I/O ports at e400 [size=16]
	Region 5: I/O ports at e000 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at dc00 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at d800 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at d400 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at d000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at cc00 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 128 bytes
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
	Subsystem: VIA Technologies, Inc. DFI KT600-AL Motherboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
	Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at c800 [size=256]
	Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev 01) (prog-if 00 [VGA])
	Subsystem: VIA Technologies, Inc. UniChrome Pro IGP
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f4000000 (32-bit, prefetchable) [disabled] [size=64M]
	Region 1: Memory at fa000000 (32-bit, non-prefetchable) [disabled] [size=16M]
	[virtual] Expansion ROM at fb000000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

My "please let this work" xorg.conf is:

Code:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "glx"
	Load  "extmod"
	Load  "xtrap"
	Load  "record"
	Load  "dbe"
	Load  "dri"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  340   270	# mm
	Identifier   "Monitor0"
	VendorName   "PTS"
	ModelName    "CY765"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 80.0
	VertRefresh  60.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync	30.0 - 80.0
	VertRefresh	60.0 - 75.0
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	BoardName   "NV34 [GeForce FX 5200]"
	BusID       "PCI:0:11:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card1"
	Driver      "vesa"
	VendorName  "Unknown Vendor"
	BoardName   "Unknown Board"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

I've tried the via driver, and the nvidia screen works but the via module happily unloads itself and shows nothing.

Xorg.0.log after starting X with vesa driver in next post...

Dria · 10-23-2006, 06:28 PM

Code:

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.4.33.3 i686 [ELF] 
Current Operating System: Linux argenteus 2.6.17.13 #4 Wed Sep 27 22:37:23 CDT 2006 i686
Build Date: 16 September 2006
	Before reporting problems, check *snip*
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 23 14:23:36 2006
(++) Using config file: "xorg.conf.new1"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
*non-via results snipped*
(II) PCI: 01:00:0: chip 1106,3344 card 1106,3344 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[1] -1	0	0x0000b400 - 0x0000b4ff (0x100) IX[B]
	[2] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
	[3] -1	0	0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfa000000 - 0xfbffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:11:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfc000000/24, 0xd0000000/28
(--) PCI: (1:0:0) unknown vendor (0x1106) unknown chipset (0x3344) rev 1, Mem @ 0xf4000000/26, 0xfa000000/24
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[1] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[2] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[3] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[4] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[5] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[6] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[7] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[8] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[10] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[12] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[13] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[14] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[15] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[16] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[17] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[18] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
(II) Inactive PCI resource ranges:
	[0] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[1] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[1] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[2] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[3] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[4] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[5] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[6] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[7] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[8] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[10] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[12] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[13] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[14] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[15] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[16] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[17] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[18] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[1] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[6] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[9] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[10] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[11] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[15] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[16] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[17] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[19] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[22] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[23] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[24] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[25] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[26] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[27] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.9.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) NV: driver for NVIDIA chipsets: *snip*
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00:0b:0
*Nvidia resources snipped*
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[6] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[9] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[10] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[11] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[15] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[16] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[17] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[19] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[20] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[22] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[23] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[24] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[25] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[26] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[27] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[6] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[9] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[10] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[11] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] 1	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 1	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 1	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[21] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[22] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[23] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[24] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[25] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[26] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[27] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[28] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[29] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[30] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[31] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[32] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[33] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
	[34] 0	0	0x800003b0 - 0x800003bb (0xc) IS[B]
	[35] 0	0	0x800003c0 - 0x800003df (0x20) IS[B]
	[36] 1	0	0xfb0003b0 - 0xfb0003bb (0xc) IS[B]
	[37] 1	0	0xfb0003c0 - 0xfb0003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
*NV snipped*
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
*NV snipped*
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
*NV snipped*
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) VESA(1): initializing int10
Requesting insufficient memory window!: start: 0xf4000000 end: 0xf7ffffff size 0xfb010000
Requesting insufficient memory window!: start: 0xfa000000 end: 0xfbffffff size 0xfb010000
Requesting insufficient memory window!: start: 0xf4000000 end: 0xf7ffffff size 0xfb010000
Requesting insufficient memory window!: start: 0xfa000000 end: 0xfbffffff size 0xfb010000
Requesting insufficient memory window!: start: 0xf4000000 end: 0xf7ffffff size 0xfb010000
Requesting insufficient memory window!: start: 0xfa000000 end: 0xfbffffff size 0xfb010000
(EE) VESA(1): Cannot read V_BIOS
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.so
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
	[1] 0	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xfdffe000 - 0xfdffe0ff (0x100) MX[B]
	[8] -1	0	0xfdfff000 - 0xfdfff0ff (0x100) MX[B]
	[9] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[10] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[11] -1	0	0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
	[12] -1	0	0xfa000000 - 0xfaffffff (0x1000000) MX[B](B)
	[13] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[20] -1	0	0x0000cc00 - 0x0000cc1f (0x20) IX[B]
	[21] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[22] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[23] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[24] -1	0	0x0000dc00 - 0x0000dc0f (0x10) IX[B]
	[25] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[26] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e803 (0x4) IX[B]
	[28] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[29] -1	0	0x0000f000 - 0x0000f003 (0x4) IX[B]
	[30] -1	0	0x0000f400 - 0x0000f407 (0x8) IX[B]
	[31] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[32] -1	0	0x0000fc00 - 0x0000fc1f (0x20) IX[B]
	[33] 0	0	0x800003b0 - 0x800003bb (0xc) IS[B](OprU)
	[34] 0	0	0x800003c0 - 0x800003df (0x20) IS[B](OprU)
*NV snipped*
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.

Near the end of the above log vesa died with "(EE) VESA(1): Cannot read V_BIOS". However, when I set the primary video device to AGP in CMOS (it has PCI and onboard settings, nvidia card is PCI and onboard just acts like PCI) it set the onboard device as primary. With my second display as primary I could start X with the above configuration... but only the second display worked, the nvidia driver gave me the same "Cannot read V_BIOS" error. (The vesa driver crashed the system once I tried to kill X, but that's another story.)

So, thanks in advance, and if there's any other info you need I'll be happy to provide it.

Edit to add: I did get a semi-functional dual display in a past Gentoo install on this machine. I believe I used some Via driver from somewhere (unichrome or openchrome or something), but I can't remember which one.

jkmccarthy · 11-26-2006, 10:55 AM

This are purely guesses, but if you're still stumped for what else to try ...

1) Near the V_BIOS error, it seems to be trying to access video memory. So I wonder how the BIOS is configured for video "shadow ram" ? Are there any BIOS settings that might help?

2) In the Xorg.conf file, do these drivers have options for VideoRAM that should be specified ?

3) Also, I notice for Screen1 your Xorg.conf file doesn't specify any resolution "Modes" in each subsection display ... try adding at least 1024x768 800x600 640x480 and see what happens.

Good luck!

-- Jim