Dual Head Video Card and onboard Video
Hello,
I am running RHEL 4. I am installed a dual head pci card onto my dell poweredge PC, which already had an onboard video card. The dual head card works, but whenever I connect a monitor to the on board, it kills my X server. The bios does not have any option to change which video card is primary and secondary. This is what i get when I cat /proc/pci: PCI devices found: Bus 0, device 0, function 0: Class 0600: PCI device 8086:7190 (rev 3). Master Capable. Latency=32. Prefetchable 32 bit memory at 0xec000000 [0xefffffff]. Bus 0, device 1, function 0: Class 0604: PCI device 8086:7191 (rev 3). Master Capable. Latency=32. Min Gnt=132. Bus 0, device 2, function 0: Class 0604: PCI device 1011:0024 (rev 3). Master Capable. Latency=32. Min Gnt=6. Bus 0, device 7, function 0: Class 0601: PCI device 8086:7110 (rev 2). Bus 0, device 7, function 1: Class 0101: PCI device 8086:7111 (rev 1). Master Capable. Latency=64. I/O at 0xffa0 [0xffaf]. Bus 0, device 7, function 2: Class 0c03: PCI device 8086:7112 (rev 1). IRQ 11. Master Capable. Latency=32. I/O at 0xdce0 [0xdcff]. Bus 0, device 7, function 3: Class 0680: PCI device 8086:7113 (rev 2). IRQ 9. Bus 0, device 13, function 0: Class 0604: PCI device 8086:0962 (rev 2). Master Capable. Latency=32. Min Gnt=6. Bus 0, device 13, function 1: Class 0104: PCI device 1069:0050 (rev 2). IRQ 10. Master Capable. Latency=32. Prefetchable 32 bit memory at 0xf6000000 [0xf6001fff]. Bus 0, device 14, function 0: Class 0604: PCI device 3388:0021 (rev 21). Master Capable. Latency=32. Min Gnt=10. Bus 0, device 16, function 0: Class 0200: PCI device 1011:0009 (rev 34). IRQ 11. Master Capable. Latency=32. Min Gnt=20.Max Lat=40. I/O at 0xdc00 [0xdc7f]. Non-prefetchable 32 bit memory at 0xfe000000 [0xfe00007f]. Bus 1, device 0, function 0: Class 0300: PCI device 1002:4757 (rev 122). Master Capable. Latency=32. Min Gnt=8. Non-prefetchable 32 bit memory at 0xfc000000 [0xfcffffff]. I/O at 0xec00 [0xecff]. Non-prefetchable 32 bit memory at 0xfbfff000 [0xfbffffff]. Bus 4, device 0, function 0: Class 0300: PCI device 102b:0525 (rev 133). IRQ 11. Master Capable. Latency=32. Min Gnt=16.Max Lat=32. Prefetchable 32 bit memory at 0xf2000000 [0xf3ffffff]. Non-prefetchable 32 bit memory at 0xf9ffc000 [0xf9ffffff]. Non-prefetchable 32 bit memory at 0xf9000000 [0xf97fffff]. and from uname -r 2.6.9-11.EL Any Ideas? :newbie: |
Forgot to give IRQ info:
CPU0 0: 66821567 XT-PIC timer 1: 926 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 10: 2748645 XT-PIC Mylex AcceleRAID 170 11: 3863122 XT-PIC uhci_hcd, eth0 12: 27078 XT-PIC i8042 14: 133 XT-PIC ide0 15: 1077333 XT-PIC ide1 NMI: 0 ERR: 6965 |
All times are GMT -5. The time now is 01:05 AM. |