LinuxQuestions.org - Drawing table pen hover stops after writing with certain pressure

- Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)

- - Drawing table pen hover stops after writing with certain pressure (https://www.linuxquestions.org/questions/linux-hardware-18/drawing-table-pen-hover-stops-after-writing-with-certain-pressure-4175621578/)

Drawing table pen hover stops after writing with certain pressure

I have xp-pen star 06 graphics tablet, I am trying to configure the tablet and I am making a slow progress, Now I have faced the following problem.

When I hover the pen over the tablet the mouse moves normally but when I start writing on the tablet with certain pressure the hover effect stops and then the tablet cursor acts like mouse down, when you write on the tablet the cursor jumps to then pen position.
I am using evdev driver
Any help to fix this issue will be appreciated

Code:

Device 'XP-PEN STAR 06':

    Device Enabled (141):  1

    Coordinate Transformation Matrix (143): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000

    Device Accel Profile (277): 0

    Device Accel Constant Deceleration (278):  1.000000

    Device Accel Adaptive Deceleration (279):  1.000000

    Device Accel Velocity Scaling (280):    10.000000

    Device Product ID (268):    10429, 120

    Device Node (267):  "/dev/input/event1"

    Evdev Axis Inversion (281): 0, 0

    Evdev Axis Calibration (282):  <no items>

    Evdev Axes Swap (283):  0

    Axis Labels (284):  "Abs X" (274), "Abs Y" (275), "Abs Pressure" (276), "Rel Vert Wheel" (273)

    Button Labels (285):    "Button Left" (144), "Button Middle" (145), "Button Right" (146), "Button Wheel Up" (147), "Button Wheel Down" (148), "Button Horiz Wheel Left" (149), "Button Horiz Wheel Right" (150), "Button Side" (270), "Button Extra" (271), "Button Forward" (272), "Button Unknown" (269), "Button Unknown" (269), "Button Unknown" (269), "Button Unknown" (269)

    Evdev Scrolling Distance (286): 1, 1, 1

    Evdev Middle Button Emulation (287):    0

    Evdev Middle Button Timeout (288):  50

    Evdev Middle Button Button (289):  2

    Evdev Third Button Emulation (290): 0

    Evdev Third Button Emulation Timeout (291): 1000

    Evdev Third Button Emulation Button (292):  3

    Evdev Third Button Emulation Threshold (293):  20

    Evdev Wheel Emulation (294):    0

    Evdev Wheel Emulation Axes (295):  0, 0, 4, 5

    Evdev Wheel Emulation Inertia (296):    10

    Evdev Wheel Emulation Timeout (297):    200

    Evdev Wheel Emulation Button (298): 4

    Evdev Drag Lock Buttons (299):  0

evtest

Code:

Input driver version is 1.0.1

Input device ID: bus 0x3 vendor 0x28bd product 0x78 version 0x100

Input device name: "XP-PEN STAR 06"

Supported events:

  Event type 0 (EV_SYN)

  Event type 1 (EV_KEY)

    Event code 272 (BTN_LEFT)

    Event code 273 (BTN_RIGHT)

    Event code 274 (BTN_MIDDLE)

    Event code 275 (BTN_SIDE)

    Event code 276 (BTN_EXTRA)

    Event code 277 (BTN_FORWARD)

    Event code 330 (BTN_TOUCH)

  Event type 2 (EV_REL)

    Event code 0 (REL_X)

    Event code 1 (REL_Y)

    Event code 8 (REL_WHEEL)

    Event code 9 (REL_MISC)

  Event type 3 (EV_ABS)

    Event code 0 (ABS_X)

      Value  11118

      Min        0

      Max    32767

    Event code 1 (ABS_Y)

      Value  20792

      Min        0

      Max    32767

    Event code 24 (ABS_PRESSURE)

      Value      0

      Min        0

      Max    8191

  Event type 4 (EV_MSC)

    Event code 4 (MSC_SCAN)

Properties:

Testing ... (interrupt to exit)

In evtest I can see events while the pen is hover over the tablet but the mouse is not moving.

here xinput test output while the problem acquired, the motion stops.
xinput test

Code:

motion a[0]=13106 a[1]=23209 

motion a[0]=13081 a[1]=23244 

motion a[0]=13051 

motion a[0]=13014 a[1]=23281 

motion a[0]=12995 

motion a[0]=12979 

motion a[0]=12966 

motion a[0]=12951 a[1]=23247 

motion a[0]=12941 a[1]=23215 

motion a[0]=12928 

motion a[0]=12917 

motion a[0]=12913 a[1]=23215 a[2]=3167 

button press  1 

motion a[0]=12910 a[1]=23215 a[2]=3218 

motion a[0]=12908 a[1]=23215 a[2]=3725 

motion a[0]=12906 a[1]=23215 a[2]=4183 

motion a[2]=4679 

motion a[0]=12904 a[1]=23215 a[2]=5131 

motion a[2]=5553 

motion a[1]=23183 a[2]=5904 

motion a[2]=6516 

motion a[2]=6737 

motion a[2]=6950 

motion a[2]=7152 

motion a[2]=7379 

motion a[0]=12920 a[1]=23183 a[2]=7829 

motion a[2]=8001 

motion a[2]=8114 

motion a[2]=8176 

motion a[2]=8191 

motion a[0]=12908 

motion a[1]=23154 

motion a[0]=12901 

motion a[2]=7784 

motion a[0]=12895 a[1]=23119 a[2]=7234 

motion a[0]=12888 a[1]=23094 a[2]=6407 

motion a[0]=12880 a[1]=23063 a[2]=5254 

motion a[0]=12870 a[1]=23031 a[2]=3814 

motion a[0]=12849 a[1]=22950 a[2]=1095 

button release 1

Hi And welcome to Linux Questions! :)

Quote:

When I hover the pen over the tablet the mouse moves normally but when I start writing on the tablet with certain pressure the hover effect stops and then the tablet cursor acts like mouse down, when you write on the tablet the cursor jumps to then pen position.

Perhaps you could mention the Linux distribution you're using which would help with giving you an answer.
I'm not sure what your problem is? I've got a second hand Wacom Bamboo A6 tablet which just worked when I plugged it in to my Linux Mint 18.2 system though it's taking me a while to adjust to the fact that it doesn't really work like a mouse.

Hovering the pen over the tablet moves the cursor just like the mouse does but unlike the mouse, the positioning is Absolute; the bottom left of the tablet is the bottom left of the screen/app window, top right of the tablet is top right of the screen/app window.

The mouse positioning is Relative; You move the cursor up the screen and lift the mouse from the mouse mat/desk and the cursor remains at the last position. You can now move the mouse, while lifted, back down and replace on the mat then move it again and the cursor will continue from the last position. This is how everybody who has ever used a mouse expects it to work.

As I understand your "problem" is that your tablet doesn't work like the mouse?
This isn't a problem, this is how a tablet/stylus input device differs from a mouse.

Hope that helps. :)

Play Bonny!

:hattip:

Quote:

Hovering the pen over the tablet moves the cursor just like the mouse does but unlike the mouse, the positioning is Absolute; the bottom left of the tablet is the bottom left of the screen/app window, top right of the tablet is top right of the screen/app window

.

Exactly the tablet works perfectly except when I write on the tablet the hover stops then when I click on the tablet again the mouse jumps to the next absolute position but with mouse down effect, my English is bad it's kinda hard for me to explain, I guess I'll post a video soon.
I am using arch linux and thanks for your help:)

Quote:

Exactly the tablet works perfectly except when I write on the tablet the hover stops then when I click on the tablet again the mouse jumps to the next absolute position but with mouse down effect, my English is bad it's kinda hard for me to explain,

Just to clarify, are you just talking about the tablet and stylus, or the tablet and stylus and the mouse?

"Clicking" the stylus on the tablet is the same as what you are calling "mouse down", the screen cursor which follows the stylus (and can also be moved by the mouse for that matter)can be moved by both input devices.

My set up has two screens, the mouse works across both perfectly but I could only set the tablet to work over one, so my left hand screen is effectively mapped to the tablet, the stylus won't move the cursor over to the right hand screen. I have to use the mouse to do that. Again, this is one of the differences between a tablet/stylus and mouse.

Does this help in any way? I'm still not sure that what you're experiencing is a problem. :scratch:

Play Bonny!

:hattip:

Quote:

Originally Posted by Soadyheid (Post 5806679)

Sorry for the confusion, Yes the problem occurs when I click with the stylus on the tablet after that the cursor wont follow the stylus when I hover the tablet.
The regular mouse actions are not affected.

here a video showing the stylus hover stops working after a certain pressure
https://youtu.be/lHQsUjtKrJY

Quote:

Yes the problem occurs when I click with the stylus on the tablet

When you click, is that using the stylus tip or one of the (possibly) two buttons on the stylus which can be programmed to do different things? e.g scroll up, down left or right, act like the left, right or middle mouse button.

Ahhhhh....

I've just noticed that if I'm writing with the tip on the tablet then push and hold the button programmed as the right button, I can raise the stylus from the tablet to the "hover" position and the cursor still draws on the drawing frame. If I release the button it goes back to hover mode just showing where the cursor is. Is this what you get? Pressing the button when in hover mode doesn't draw anything but it can activate the various control icons. Interesting... :scratch:

Play Bonny!

:hattip:

Quote:

Originally Posted by Soadyheid (Post 5806885)

What I saw in the video was you writing something and drawing. The circular cursor then goes up to the colour adjuster Icon next to the three paintbrushes at the top right. The cursor changes from the "My Paint" circle to a normal cursor/pointer as it's outside the drawing frame, then the video stops so I'm not sure what I'm supposed to be seeing. It all looks normal to me, my tablet does the same.

When you click, is that using the stylus tip or one of the (possibly) two buttons on the stylus which can be programmed to do different things? e.g scroll up, down left or right, act like the left, right or middle mouse button.

Ahhhhh....

I've just noticed that if I'm writing with the tip on the tablet then push and hold the button programmed as the right button, I can raise the stylus from the tablet to the "hover" position and the cursor still draws on the drawing frame. If I release the button it goes back to hover mode just showing where the cursor is. Is this what you get? Pressing the button when in hover mode doesn't draw anything but it can activate the various control icons. Interesting... :scratch:

Play Bonny!

:hattip:

I just click with the tip with certain pressure then release after that the hover stops.

Quote:

I just click with the tip with certain pressure then release after that the hover stops.

Sorry, I'm not sure where to go with this now. I'm not sure what sort of mechanism the XP Pen Star 06 tablet uses to work out position and which key has been pressed. The Wacom tablets use electromagnetic resonance technology which is possibly patented. The XP Pen Star 06 may use something similar but I have no idea, the Wacom tablets work like this which may be of some use.

My next step would probably be to source a replacement pen if possible, otherwise... I'm stuck.

Good luck and Play Bonny!

:hattip:

Quote:

Originally Posted by Soadyheid (Post 5807519)

It's is a driver problem, the tablet doesn't have official drivers thanks for helping :)