LinuxQuestions.org
Did you know LQ has a Linux Hardware Compatibility List?
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 09-18-2004, 07:50 AM   #1
keripukki
LQ Newbie
 
Registered: Aug 2004
Posts: 19

Rep: Reputation: 0
Disabling IRQ #11


Hi,
I just upgraded to 2.6.8 because I've had this same problem for while already. My machine suddenly starts lagging and /dev/hde stops working after that. I get something like this with dmesg:

Disabling IRQ #11
EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=7897448, block=15794189
end_request: I/O error, dev hde, sector 126353559
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=7897407, block=15794187
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():0
[] __might_sleep+0xb2/0xd3
[] drm_free+0xb7/0x150 [fglrx]
[] __ke_down_struct_sem+0x2a/0x44 [fglrx]
[] firegl_remove_all_drawables+0x3f/0x100 [fglrx]
[] firegl_release_helper+0x546/0x750 [fglrx]
[] firegl_takedown+0x32/0xaa0 [fglrx]
[] firegl_release+0x12f/0x190 [fglrx]
[] sys_fstat64+0x37/0x39
[] __fput+0x112/0x124
[] filp_close+0x59/0x86
[] sys_close+0x63/0x96
[] syscall_call+0x7/0xb
end_request: I/O error, dev hde, sector 4287
Buffer I/O error on device hde1, logical block 528
lost page write due to I/O error on hde1
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11


On boot I get something like this

hde: sata_error = 0x00090000, watchdog = 1, siimage_mmio_ide_dma_test_irq
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0004610000052c50]
hde: dma_timer_expiry: dma status == 0x61
hde: DMA timeout error
hde: dma timeout error: status=0xd0 { Busy }

hde: DMA disabled
ide2: reset phy, status=0x00000113, siimage_reset
ide2: reset timed-out, status=0xd0
hde: status timeout: status=0xd0 { Busy }

ide2: reset phy, status=0x00000113, siimage_reset
hde: drive not ready for command
irq 11: nobody cared!
[] __report_bad_irq+0x2a/0x8b
[] note_interrupt+0x6f/0x9f
[] do_IRQ+0x17c/0x1a8
[] common_interrupt+0x18/0x20
[] __do_softirq+0x2f/0x80
[] do_softirq+0x43/0x52
=======================
[] do_IRQ+0x155/0x1a8
[] common_interrupt+0x18/0x20
[] default_idle+0x23/0x26
[] cpu_idle+0x2c/0x35
[] start_kernel+0x165/0x17f
[] unknown_bootoption+0x0/0x149
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
ide2: reset phy dead, status=0x00000000
ide2: host reset_poll failure for hde.
hde: status timeout: status=0xd0 { Busy }

ide2: reset phy, status=0x00000000, siimage_reset
ide2: reset phy dead, status=0x00000000
hde: drive not ready for command
irq 11: nobody cared!
[] __report_bad_irq+0x2a/0x8b
[] note_interrupt+0x6f/0x9f
[] do_IRQ+0x17c/0x1a8
[] reset_pollfunc+0x0/0x1b9
[] common_interrupt+0x18/0x20
[] reset_pollfunc+0x0/0x1b9
[] ide_timer_expiry+0x118/0x220
[] ide_timer_expiry+0x0/0x220
[] run_timer_softirq+0xce/0x1ae
[] __do_softirq+0x7e/0x80
[] do_softirq+0x43/0x52
=======================
[] do_IRQ+0x155/0x1a8
[] common_interrupt+0x18/0x20
[] default_idle+0x23/0x26
[] cpu_idle+0x2c/0x35
[] start_kernel+0x165/0x17f
[] unknown_bootoption+0x0/0x149
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
ide2: reset phy dead, status=0x00000000
ide2: host reset_poll failure for hde.
end_request: I/O error, dev hde, sector 65
irq 11: nobody cared!
[] __report_bad_irq+0x2a/0x8b
[] note_interrupt+0x6f/0x9f
[] do_IRQ+0x17c/0x1a8
[] reset_pollfunc+0x0/0x1b9
[] common_interrupt+0x18/0x20
[] reset_pollfunc+0x0/0x1b9
[] ide_timer_expiry+0x118/0x220
[] ide_timer_expiry+0x0/0x220
[] run_timer_softirq+0xce/0x1ae
[] __do_softirq+0x7e/0x80
[] do_softirq+0x43/0x52
=======================
[] do_IRQ+0x155/0x1a8
[] common_interrupt+0x18/0x20
[] default_idle+0x23/0x26
[] cpu_idle+0x2c/0x35
[] start_kernel+0x165/0x17f
[] unknown_bootoption+0x0/0x149
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
EXT3-fs: unable to read superblock
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11
irq 11: nobody cared!
Stack pointer is garbage, not printing trace
handlers:
[] (ide_intr+0x0/0x18e)
[] (ohci_irq_handler+0x0/0x80e)
[] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #11


Sorry for long post, I would have put dmesg to my homepage but all my passwords are in /dev/hde and I can't access them now. My motherboard is EPOX 8rda3+
 
Old 09-18-2004, 09:22 AM   #2
ToniT
Senior Member
 
Registered: Oct 2003
Location: Zurich, Switzerland
Distribution: Debian/unstable
Posts: 1,357

Rep: Reputation: 47
Looks like a hardware problem. Most probably your HD is broken.
 
Old 09-18-2004, 02:36 PM   #3
mritch
Member
 
Registered: Nov 2003
Location: austria
Distribution: debian
Posts: 667

Rep: Reputation: 30
disable dma for that drive. seems like a bug in the kernel for me. what does acpi say about irq's?

sl mritch.
 
Old 09-18-2004, 05:24 PM   #4
keripukki
LQ Newbie
 
Registered: Aug 2004
Posts: 19

Original Poster
Rep: Reputation: 0
Quote:
Originally posted by mritch
disable dma for that drive. seems like a bug in the kernel for me. what does acpi say about irq's?

sl mritch.
I have acpi disabled. Here's info about interrupts:

Code:
cat /proc/interrupts
           CPU0
  0:     612672          XT-PIC  timer
  1:       3951          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:     561649          XT-PIC  ehci_hcd, usb-ohci, NVidia nForce2, eth0
  8:          2          XT-PIC  rtc
 11:     137360          XT-PIC  ide2, usb-ohci
 12:     236674          XT-PIC  PS/2 Mouse
 14:      10705          XT-PIC  ide0
 15:          1          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0
And btw I didn't mention. This problem doesn't occur on every boot. I can sometimes use computer for days before I get this error again, and then it comes several times in short time. I've tried disabling usb and acpi but it didn't help.

hde1 seems to work fine with 2.4 kernel (well... I've tested only 2 hours so I can't be sure), so maybe it's not hardware problem...
I'll try disabling dma

Last edited by keripukki; 09-18-2004 at 05:28 PM.
 
Old 09-18-2004, 05:54 PM   #5
mritch
Member
 
Registered: Nov 2003
Location: austria
Distribution: debian
Posts: 667

Rep: Reputation: 30
dma maybe isn't the issue here. you've done right deaktivating usb, that's the thing i'd recommend. the "nobody cared" is iirc about something not handled by the bios = irq not assigned.

i don't know how stable sata is in 2.6 for your device so you may be at a better address posting this to http://www.tux.org/lkml/ .

another thing. do you have the option to unmask interrupts with that drive? (hdparm -u /dev/hde - read the hdparm manpage before!)

i'd say this is some prob with the interrupt assignment. so changing the used interrupt of the sata controller may fix that. (try another pci slot?)

sl mritch.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Disabling IRQ#5 fails Janneman Linux - Software 1 11-08-2005 08:20 AM
kernel: Disabling IRQ specman Mandriva 2 10-21-2005 07:35 AM
Disabling irq #5 with FC3 tsencic Linux - Hardware 0 12-06-2004 05:08 PM
hdd trouble --> disabling IRQ #7 bobbens Linux - Hardware 2 11-27-2004 04:54 AM
Disabling IRQ #7? rjerina Linux - Hardware 4 07-30-2004 12:47 AM


All times are GMT -5. The time now is 11:46 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration