LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices



Reply
 
Search this Thread
Old 01-09-2005, 03:01 PM   #1
Grasshopper
Member
 
Registered: Nov 2003
Location: CT, USA
Posts: 55

Rep: Reputation: 15
Dell SB Live! [value] sound card, Mandrake 10.1, ALSA 1.0.7, playback problems


Some background on the card and problem:

This is a Creative Sound Blaster Live! card that came with a Dell Dimension desktop.
This card is NOT a regular Creative Sound Blaster Live card.
The chipset used in this card is different from the regular one which is/was supported under the snd-emu10k1 module under ALSA. The SB Live Value card (this is what the Dell version of the card is sometimes referred to as) has recently become supported under ALSA 1.0.6 under the snd-emu10k1x module.

I had this card working under Mandrake 10 Official Download edition. This necessitated compiling a kernel without either OSS or ALSA support and building ALSA from source. To do this I followed the ALSA quickstart guide available at http://alsa.opensrc.org/index.php?page=Quick+Install [see notes below on exact build arguments].

Under Mandrake 10.1 Official Download Edition this method did not work, although sound will play it has a distorted and "warbly" sound to it. This is true of files played from my native hard drive and the internet. This is also true whether I used either ALSA version 1.0.6 or 1.0.7 .

As for arguments used for building ALSA from source I used this guide http://alsa.opensrc.org/index.php?page=Quick+Install. The only deviation from this was when building alsa-driver-1.0.7 I used the argument ./configure --with-cards=emu10k1x --with-isapnp=no --with-sequencer=yes , this was to include my particular soundcard in the build process, and to account for not having any ISA devices.

I have followed this procedure on my default 2.6.8.1-12mdk kernel, a modified 2.6.8.1-12mdk kernel [left out all OSS and ALSA], and also with a 2.6.10 kernel again leaving out all OSS and ALSA. All of these resulted in the same "warbly" sounding playback of all audio files. I have tried turning on and off artsd with no change/improvement. Also I have tried playback under Gnome with the same "warbly" results [all previous testing was done under KDE].

Furthermore I have tried compiling each of the above mentioned kernels with various and/or all parts of OSS and ALSA being included with the same "warbly" problems.

I've run alsaconf [you can see it's changes to my modprobe.conf] and alsamixer and double checked all volume/mixer settings along with changing them all with no positive effect.

When I went from Mandrake 10 to 10.1 I did a completely new install not an upgrade.

At this point I feel like this must be a Mandrake 10.1 problem in that it some how differs from 10 in how in handles playback under my card. Maybe a simple config change even.

Some background on the misbehaving machine:


Distro:

Mandrake 10.1 Official Download Edition


$ lspci

00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (r
ev 04)
00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon 9
500 Pro]
01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro] (Secondary)
02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
02:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:02.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:02.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
02:08.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02)
02:09.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
02:09.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
02:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)


$ uname -r

2.6.8.1-12mdk

-Default Mandrake kernel with kernel sources installed via rpm.


$ cat /etc/modprobe.conf

# This file is autogenerated from /etc/modules.conf using generate-modprobe.conf command

alias eth0 eepro100
#remove snd-emu10k1 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-emu10k1
#install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1 && { /sbin/modprobe snd-pcm-oss; /bin/true; }
install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe ehci-hcd; /bin/true

alias snd-0 snd-emu10k1x
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.7 ---
options snd device_mode=0666
alias snd-card-0 snd-emu10k1x
alias sound-slot-0 snd-emu10k1x
# --- END: Generated by ALSACONF, do not edit. ---


# dmesg

usable)
BIOS-e820: 000000001ff6f000 - 000000001ff71000 (ACPI NVS)
BIOS-e820: 000000001ff71000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 130927
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126831 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fd540
ACPI: RSDT (v001 DELL 8250 0x00000008 ASL 0x00000061) @ 0x000fd554
ACPI: FADT (v001 DELL 8250 0x00000008 ASL 0x00000061) @ 0x000fd588
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffe5e7c
ACPI: MADT (v001 DELL 8250 0x00000008 ASL 0x00000061) @ 0x000fd5fc
ACPI: BOOT (v001 DELL 8250 0x00000008 ASL 0x00000061) @ 0x000fd668
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Dim 8250 APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Built 1 zonelists
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Linux ro root=342 acpi=ht resume=/dev/hdb6 splash=silent
bootsplash: silent mode.
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2386.559 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514788k/523708k available (1859k kernel code, 8160k reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4734.97 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-13, 1-20, 1-21, 1-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 45.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 001 01 1 1 0 1 0 1 1 A1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 C1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2386.0133 MHz.
..... host bus clock speed is 132.0562 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 168k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbe8e, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 19
PCI->APIC IRQ transform: (B2,I1,P1) -> 18
PCI->APIC IRQ transform: (B2,I1,P2) -> 16
PCI->APIC IRQ transform: (B2,I2,P0) -> 18
PCI->APIC IRQ transform: (B2,I2,P1) -> 17
PCI->APIC IRQ transform: (B2,I2,P2) -> 19
PCI->APIC IRQ transform: (B2,I8,P0) -> 17
PCI->APIC IRQ transform: (B2,I9,P0) -> 18
PCI->APIC IRQ transform: (B2,I12,P0) -> 18
vesafb: framebuffer at 0xf0000000, mapped to 0xe0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:5796
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1105280473.769:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:02:01.0, from 10 to 3
PCI: Via IRQ fixup for 0000:02:01.1, from 3 to 2
PCI: Via IRQ fixup for 0000:02:02.0, from 3 to 2
PCI: Via IRQ fixup for 0000:02:02.1, from 11 to 1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: WDC WD1200JB-75CRA0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 234375000 sectors (120000 MB)
native capacity is 234441648 sectors (120034 MB)
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target1/lun0: p1 < p5 p6 p7 > p2
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:02:01.0: UHCI Host Controller
uhci_hcd 0000:02:01.0: irq 19, io base 0000dce0
uhci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:02:01.1: UHCI Host Controller
uhci_hcd 0000:02:01.1: irq 18, io base 0000dcc0
uhci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:02:02.0: UHCI Host Controller
uhci_hcd 0000:02:02.0: irq 18, io base 0000dca0
uhci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:02:02.1: UHCI Host Controller
uhci_hcd 0000:02:02.1: irq 17, io base 0000dc80
uhci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:02:01.2: EHCI Host Controller
ehci_hcd 0000:02:01.2: irq 16, pci mem e09e5c00
ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:01.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ehci_hcd 0000:02:02.2: EHCI Host Controller
ehci_hcd 0000:02:02.2: irq 19, pci mem e09e7800
ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:02:02.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
EXT3 FS on hdb2, internal journal
Adding 1124508k swap on /dev/hdb6. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.15 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
usb 3-1: new low speed USB device using address 2
NTFS volume version 3.1.
usbcore: registered new driver hiddev
loop: loaded (max 8 devices)
usb 4-2: new low speed USB device using address 2
hiddev0: USB HID v1.10 Device [APC Back-UPS ES 500 FW:801.e5.D USB FW:e5] on usb-0000:02:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:02:02.1-2
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:07:E9:C0:9D:08, IRQ 18.
Board assembly 000200-008, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
Secondary interface chip i82555.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xd0a6c714).
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 328 bytes per conntrack
inserting floppy driver for 2.6.8.1-12mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 328 bytes per conntrack
ALSA /usr/src/alsa/alsa_1.0.7/alsa-driver-1.0.7/kbuild/../pci/emu10k1/emu10k1x.c:974: Model 1003 Rev 00000000 Serial 10031102
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x100000
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
 
Old 07-11-2005, 03:28 PM   #2
Grasshopper
Member
 
Registered: Nov 2003
Location: CT, USA
Posts: 55

Original Poster
Rep: Reputation: 15
Well I changed the Amarok audio engine to xine and all is well.

To do this from the Amarok playlist screen choose Settings ----> Configure Amarok -----> Engine -----> change the engine to xine or your desired audio engine.

Hopefully posting this solution will help anyone else with this problem and will cut down on the number of zero reply threads.

Enjoy!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SB Live!Value (Dell) with 4.1 sound system on mandrake 10.1 prete Linux - Hardware 1 08-25-2005 02:45 PM
ALSA not working for Creative Sound Blaster Live 24 Bit sound card vishalsonu Linux - Hardware 7 08-20-2005 02:02 PM
Dell SB Live Sound Card Problem. help me plz!! cs378 Linux - Hardware 1 12-21-2004 12:24 AM
ALSA drivers for my Dell Sound Card rgbrock1 Linux - Hardware 0 10-13-2004 06:37 PM
Help Creative Sound Blaster Live 5.1 on Dell w/ mandrake 9.1 Kason Linux - Newbie 12 09-21-2003 02:50 PM


All times are GMT -5. The time now is 04:56 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration