I am having a problem with a DELL 2450 running Fedora 7 (F7).
There are 2 issues I have identified:
The install seems to be ok but there are a number of errors which appear. First of all, when I do an fdisk -l I get:
Code:
Disk /dev/sda: 54.3 GB, 54351888384 bytes
255 heads, 63 sectors/track, 6607 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 6607 52966305 8e Linux LVM
Disk /dev/sdb: 18.2 GB, 18210048000 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 6607 52966305 8e Linux LVM
Disk /dev/sdc: 18.2 GB, 18210048000 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 13 104391 83 Linux
/dev/sdc2 14 6607 52966305 8e Linux LVM
Disk /dev/sdd: 18.2 GB, 18210048000 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 * 1 13 104391 83 Linux
/dev/sdd2 14 6607 52966305 8e Linux LVM
Disk /dev/sde: 18.2 GB, 18210048000 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 * 1 13 104391 83 Linux
/dev/sde2 14 6607 52966305 8e Linux LVM
Very odd as the whole RAID appears as each SCSI drive...
At startup I get all sorts of buffer errors (and extract of DMSG is availble if that would help).
Lastly, this may be to do with the other items, I have installed a SATA card which does not appear to be recognsied.
Thanks,
Michael.
Dell 2450 SCSI RAID and SATA device problem
