Hi,
I recently purchased a new system and am running a dual-boot with Debain r3.1 and Windows XP Pro. My dual boot functions well, but note item 3 below.
My system details are:
ASUS A8N-SLI Deluxe nForce 4 SLI Socket 939 Motherboard
AMD Athlon 64 3200+ Processor (939)
1024MB TWINX-3200C2 DDR RAM Corsair (2X512MB)
Seagate Serial ATA 200GB 7200RPM 8mb Cache
Albatron 256MDDR PC6800GT PCI Express Video
BENQ FP71E+ 17 inch LCD monitor Dual Input
Powersupply Antec ATX TruePower 430W ver2
Lian Li PC61 Aluminium USB Black case
I have about a year's worth of random Linux experience and have managed to get a reasonable amount of what I need working. Below is the output of some commands that should be of some help. I am having the following problems:
1. When configuring xfree86, I have had to utilise the "vesa" option and hence my Nvidia card is not working properly. I have tried various drivers (including Nvidia's official one) and have had no success in compiling and installing a driver.
2. I have no sound in Debian and alsaconfig seems to compile modules but not install them.
3. A minor problem, whenever I reboot from XP to Debian (or vice versa) my time seems to constantly change. I suspect this is an issue with timezones, but do I need to set both to GMT? I am in Brisbane (Australia) and believe that I have both set to GMT+10:00.
Below are some command outputs:
[B]$:/ uname -r
2.6.8-11-amd64-generic
$:/ lsmod
Module Size Used by
soundcore 10912 0
ipv6 245800 8
shpchp 86056 0
pciehp 84616 0
pci_hotplug 31192 2 shpchp,pciehp
forcedeth 17792 0
tsdev 8448 0
mousedev 10956 1
evdev 10496 0
psmouse 18572 0
ext3 112272 2
jbd 54704 1 ext3
eth1394 21008 0
sk98lin 139212 1
ds 19848 0
yenta_socket 20352 0
pcmcia_core 61836 2 ds,yenta_socket
sr_mod 16676 0
sbp2 23176 0
sd_mod 20480 4
ide_cd 39328 0
cdrom 36008 2 sr_mod,ide_cd
ide_disk 19328 0
ide_generic 1920 0
pdc202xx_new 11084 0
aec62xx 11084 0
alim15x3 12184 0
amd74xx 14256 1
atiixp 8736 0
cmd64x 11980 0
cs5520 7184 0
cs5530 7056 0
cy82c693 5384 0
generic 5504 0
hpt34x 6400 0
ns87415 5420 0
opti621 5124 0
pdc202xx_old 16332 0
piix 13388 0
rz1000 3456 0
sc1200 8976 0
serverworks 12964 0
siimage 13056 0
sis5513 14480 0
slc90e66 8336 0
triflex 6024 0
trm290 5124 0
via82cxxx 13360 0
usb_storage 63680 0
ide_core 146144 28 ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cy82c6 93,generic,hpt34x,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e 66,triflex,trm290,via82cxxx,usb_storage
ohci1394 32132 0
ieee1394 107864 3 eth1394,sbp2,ohci1394
fbcon 29476 71
vga16fb 12928 1
vgastate 9088 1 vga16fb
usbserial 30448 0
usbkbd 7680 0
ehci_hcd 28804 0
ohci_hcd 20100 0
thermal 14220 0
processor 18364 1 thermal
fan 4616 0
sata_sil 9604 0
sata_nv 9604 3
libata 40072 2 sata_sil,sata_nv
scsi_mod 122912 5 sr_mod,sbp2,sd_mod,usb_storage,libata
unix 28096 345
font 9216 1 fbcon
vesafb 7216 0
cfbcopyarea 4224 2 vga16fb,vesafb
cfbimgblt 3328 2 vga16fb,vesafb
cfbfillrect 4224 2 vga16fb,vesafb
$:/ lspci
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
0000:00:04.0 Multimedia audio controller: nVidia Corporation: Unknown device 0059 (rev a2)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev a2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev a3)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 0055 (rev a3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00f9 (rev a2)
0000:05:0a.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
0000:05:0c.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
$:/ dmesg
data, 116k init)
Calibrating delay loop... 3981.31 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.564 MHz APIC timer.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI interrupt 0000:05:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
ACPI: PCI interrupt 0000:05:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 3
ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4148 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
sata_nv version 0.02
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
Using anticipatory io scheduler
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 10
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 10
nv_sata: Primary device added
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:007f
ata3: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: no device found (phy stat 00000000)
scsi3 : sata_nv
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
sata_sil version 0.54
ACPI: PCI interrupt 0000:05:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ata5: SATA max UDMA/100 cmd 0xFFFFFF001001C080 ctl 0xFFFFFF001001C08A bmdma 0xFF
FFFF001001C000 irq 5
ata6: SATA max UDMA/100 cmd 0xFFFFFF001001C0C0 ctl 0xFFFFFF001001C0CA bmdma 0xFF
FFFF001001C008 irq 5
ata7: SATA max UDMA/100 cmd 0xFFFFFF001001C280 ctl 0xFFFFFF001001C28A bmdma 0xFF
FFFF001001C200 irq 5
ata8: SATA max UDMA/100 cmd 0xFFFFFF001001C2C0 ctl 0xFFFFFF001001C2CA bmdma 0xFF
FFFF001001C208 irq 5
ata5: no device found (phy stat 00000000)
scsi4 : sata_sil
ata6: no device found (phy stat 00000000)
scsi5 : sata_sil
ata7: no device found (phy stat 00000000)
scsi6 : sata_sil
ata8: no device found (phy stat 00000000)
scsi7 : sata_sil
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (40 C)
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: PCI device 10de:005a (nVidia Corporation)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem ffffff001001e000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI interrupt 0000:00:02.1
-> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: PCI device 10de:005b (nVidia Corporation)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: irq 10, pci mem ffffff0010020000
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
vga16fb: initializing
vga16fb: mapped to 0x00000100000a0000
fb0: VGA16 VGA frame buffer device
Console: switching to colour frame buffer device 80x30
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:05:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[d4009000-d40097ff] Max
Packet=[2048]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
MA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800001316b9]
hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 3 (level, low) -> IRQ 3
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 3 (level, low) -> IRQ 3
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1
EXT3 FS on sda2, internal journal
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
snd: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd64-ge
neric gcc-3.4'
snd_seq_device: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_rawmidi: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-
amd64-generic gcc-3.4'
snd_mpu401_uart: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8
-11-amd64-generic gcc-3.4'
snd_page_alloc: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_timer: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-am
d64-generic gcc-3.4'
snd: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd64-ge
neric gcc-3.4'
snd_timer: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-am
d64-generic gcc-3.4'
snd_page_alloc: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_pcm: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd6
4-generic gcc-3.4'
snd_ac97_codec: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd64-ge
neric gcc-3.4'
snd_seq_device: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_rawmidi: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-
amd64-generic gcc-3.4'
snd_mpu401_uart: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8
-11-amd64-generic gcc-3.4'
snd_page_alloc: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_timer: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-am
d64-generic gcc-3.4'
snd: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd64-ge
neric gcc-3.4'
snd_timer: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-am
d64-generic gcc-3.4'
snd_page_alloc: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_pcm: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11-amd6
4-generic gcc-3.4'
snd_ac97_codec: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-
11-amd64-generic gcc-3.4'
snd_intel8x0: version magic '2.6.8-11-amd64-generic gcc-3.3' should be '2.6.8-11
-amd64-generic gcc-3.4'
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth2: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803141c0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
Sound and graphics work fine in XP. Please let me know if you need any more command output as this is already a long post.
Any help that could be offered would be greatly appreciated.
Thanks....
