LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 07-20-2005, 08:21 PM   #1
rjmckee
LQ Newbie
 
Registered: Sep 2003
Location: Vidalia, GA
Distribution: PCLinuxOS
Posts: 6

Rep: Reputation: 0
conflict between WinTV card & webcam (usb)


Hello all,
I am running a Gentoo 2.6.10 system and all works well:
Digikam sees/uses my PCCAM300 (also a web cam).
TVtime works great w/ my Hauppauge bt878 card.
BUT,
GnomeMeeting only finds the bt878 & v4l setup and NOT the webcam on a usb port.
All my USB devices work fine (flashdisks, camera, etc).
I think this may be a hardware conflict OR ????????
Following is my lspci & dmesg ouput:

DMESG:
2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192496 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
Built 1 zonelists
Kernel command line: root/dev/hda3 vga=0x317 idle=C1halt
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1730.666 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773792k/786368k available (3207k kernel code, 12052k reserved, 1105k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3424.25 BogoMIPS (lpj=1712128)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2100+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 99k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb570, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1121590108.098:0): initialized
SGI XFS with no debug enabled
Initializing Cryptographic API
vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 3072k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f910
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
ppdev: user-space parallel port driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: faking semi-colon
parport0: Printer, HEWLETT-PACKARD DESKJET 710C
lp0: using parport0 (polling).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: IC35L180AVV207-1, ATA DISK drive
hdb: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y160P0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: max request size: 1024KiB
hdc: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
hdc: cache flushes supported
hdc: hdc1 hdc2
hdb: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 SCSI adapter>
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs

Vendor: HP Model: C5110A Rev: 3701
Type: Processor ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 3
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 5, pci mem 0xda002000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 5, pci mem 0xda000000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 11, pci mem 0xda001000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 3-3: new full speed USB device using ohci_hcd and address 2
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
input: PC Speaker
gameport: pci0000:01:07.1 speed 828 kHz
input: Logitech WingMan Extreme Digital [WMD] on isa0201/gameport0
gameport: NS558 ISA at 0x201 speed 693 kHz
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ALSA device list:
#0: Sound Blaster Live! (rev.7) at 0xc400, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (6143 buckets, 49144 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Couldn't find valid RAM disk image starting at 0.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding 1469936k swap on /dev/hda2. Priority:-1 extents:1
Linux video capture interface: v1.00
usbcore: registered new driver ov511
drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
eth0: ADMtek Comet rev 17 at f0d6e000, 00:0C:41:22:A4:78, IRQ 5.
IPv4 over IPv4 tunneling driver
NTFS driver 2.1.22 [Flags: R/O MODULE].
nvidia: module license 'NVIDIA' taints kernel.
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: replayed 1 transactions in 0 seconds
ReiserFS: hda5: Using r5 hash to sort names
ReiserFS: hda5: Removing [117045 146202 0x0 SD]..done
ReiserFS: hda5: Removing [110361 143447 0x0 SD]..done
ReiserFS: hda5: Removing [110361 143445 0x0 SD]..done
ReiserFS: hda5: Removing [110361 143442 0x0 SD]..done
ReiserFS: hda5: Removing [110361 143441 0x0 SD]..done
ReiserFS: hda5: Removing [110361 143440 0x0 SD]..done
ReiserFS: hda5: Removing [117045 133791 0x0 SD]..done
ReiserFS: hda5: Removing [94975 124204 0x0 SD]..done
ReiserFS: hda5: Removing [114866 115581 0x0 SD]..done
ReiserFS: hda5: Removing [114866 115573 0x0 SD]..done
ReiserFS: hda5: Removing [114866 115386 0x0 SD]..done
ReiserFS: hda5: Removing [110361 115331 0x0 SD]..done
ReiserFS: hda5: Removing [110361 115283 0x0 SD]..done
ReiserFS: hda5: Removing [110361 115045 0x0 SD]..done
ReiserFS: hda5: Removing [110361 114901 0x0 SD]..done
ReiserFS: hda5: Removing [114866 114896 0x0 SD]..done
ReiserFS: hda5: Removing [110361 114881 0x0 SD]..done
ReiserFS: hda5: Removing [60746 114866 0x0 SD]..done
ReiserFS: hda5: Removing [114649 114791 0x0 SD]..done
ReiserFS: hda5: Removing [94975 114684 0x0 SD]..done
ReiserFS: hda5: Removing [114649 114682 0x0 SD]..done
ReiserFS: hda5: Removing [60746 114649 0x0 SD]..done
ReiserFS: hda5: Removing [114649 114233 0x0 SD]..done
ReiserFS: hda5: Removing [117045 110002 0x0 SD]..done
ReiserFS: hda5: Removing [110361 100480 0x0 SD]..done
ReiserFS: hda5: Removing [110361 100474 0x0 SD]..done
ReiserFS: hda5: Removing [110361 100472 0x0 SD]..done
ReiserFS: hda5: Removing [110361 100471 0x0 SD]..done
ReiserFS: hda5: Removing [110361 100469 0x0 SD]..done
ReiserFS: hda5: Removing [114649 89144 0x0 SD]..done
ReiserFS: hda5: Removing [117045 62131 0x0 SD]..done
ReiserFS: hda5: Removing [110361 62028 0x0 SD]..done
ReiserFS: hda5: Removing [110361 62027 0x0 SD]..done
ReiserFS: hda5: Removing [110361 62026 0x0 SD]..done
ReiserFS: hda5: Removing [110361 62025 0x0 SD]..done
ReiserFS: hda5: Removing [110361 62019 0x0 SD]..done
ReiserFS: hda5: Removing [117045 62018 0x0 SD]..done
ReiserFS: hda5: There were 37 uncompleted unlinks/truncates. Completed
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: replayed 1 transactions in 0 seconds
ReiserFS: hda6: Using r5 hash to sort names
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: replayed 1 transactions in 0 seconds
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
ReiserFS: hdc1: using ordered data mode
ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc1: checking transaction log (hdc1)
ReiserFS: hdc1: replayed 1 transactions in 0 seconds
ReiserFS: hdc1: Using r5 hash to sort names
ReiserFS: hdc2: found reiserfs format "3.6" with standard journal
ReiserFS: hdc2: using ordered data mode
ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc2: checking transaction log (hdc2)
ReiserFS: hdc2: replayed 1 transactions in 0 seconds
ReiserFS: hdc2: Using r5 hash to sort names
0000:01:06.0: tulip_stop_rxtx() failed
eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
spurious 8259A interrupt: IRQ7.
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 11, latency: 32, mmio: 0xd4000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=44801, tuner=Temic 4036FY5 (8), radio=no
bttv0: using tuner=8
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 8 (Temic NTSC (4036 FY5)) by bt878 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
ethereal uses obsolete (PF_INET,SOCK_PACKET)
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=38 irq=794644/794644, risc=18c2107c, bits: HSYNC OFLOW FDSR
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
usb 3-3: USB disconnect, address 2
bttv0: timeout: drop=52 irq=805476/805476, risc=0b3d693c, bits: HSYNC OFLOW
bttv0: reset, reinitialize
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: timeout: drop=66 irq=888353/888353, risc=22a6107c, bits: HSYNC OFLOW FDSR

LSPCI:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev a2)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
0000:01:06.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
0000:01:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:01:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:01:08.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
0000:01:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:01:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0000:03:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)

Any help is greatly appreciated,
Regards,
Ray
 
Old 07-21-2005, 01:39 PM   #2
mlp68
Member
 
Registered: Jun 2002
Location: NY
Distribution: Gentoo,RH
Posts: 328

Rep: Reputation: 31
I don't think it's a hardware conflict. The Webcam is supposed to show up as another v4l device, right?

Do you have the driver loaded for the USB Cam? Can you watch its video through xawtv and similar? Does it work if you take out the Hauppauge card? Is there a video1 device in the first place, assuming the the 878 is video0?

If that's the case and only GM doesn't see it, check if you have "usb" in your USE flags. If not, you could try to add it and re-emerge GnomeMeeting. Worth a try, although I can't think of a mechanism that would GM allow to see one video device but not the other if it is indeed there.

Hope it helps,
mlp
 
Old 07-21-2005, 02:26 PM   #3
rjmckee
LQ Newbie
 
Registered: Sep 2003
Location: Vidalia, GA
Distribution: PCLinuxOS
Posts: 6

Original Poster
Rep: Reputation: 0
MLP, Thanks for your quick reply.
I have not yet taken out the b7878 card but will try soon.......
USB drivers are loaded, tho. I think you hit the nail on the head, will pursue video1 trail.
Thanks again,
Ray
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How To Install A Usb Webcam [Genius WebCam on Suse 9.1 Personal] ofvergara Suse/Novell 4 11-29-2006 12:09 PM
Conflict with sound with WinTV Go card installed LinuxLuvr Linux - Hardware 7 01-17-2005 07:54 AM
help - eth0 alias conflict with my USB-ethernet card darkelf Linux - Networking 1 11-05-2003 10:43 AM
Intel USB Webcam & "missing shared libraries: libgd.so.1.8" leavingwindows Linux - Newbie 1 10-29-2003 02:12 PM
Sound card & webcam Santas Linux - Hardware 3 08-15-2003 06:55 AM


All times are GMT -5. The time now is 06:11 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration