LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 11-21-2011, 10:55 PM   #1
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Rep: Reputation: 0
Configure tape Drive in Redhat


Please i installed a Redhat 5.x 32 bit. The tape drive was not available prior to installation. A controller card for the tape drive was installed on the system for the 3592 tape drives by someone. Now they want me to ensure that the tape drive is functional at the OS level. There is a software application that needs to use the tape drive (I can contact the software support on that). I need help to configure tape drive on the OS. Even if this was added after the installation of Redhat. The OS ought to configure the hardware. I have seen some linux commands but will appreciate someone with an experience on this issue.
 
Old 11-22-2011, 08:56 AM   #2
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
Please i installed a Redhat 5.x 32 bit. The tape drive was not available prior to installation. A controller card for the tape drive was installed on the system for the 3592 tape drives by someone. Now they want me to ensure that the tape drive is functional at the OS level. There is a software application that needs to use the tape drive (I can contact the software support on that). I need help to configure tape drive on the OS. Even if this was added after the installation of Redhat. The OS ought to configure the hardware. I have seen some linux commands but will appreciate someone with an experience on this issue.
You're not giving details we'd need to help you. Brand/model of tape drive? What kind of 'controller card'? Who was the 'someone' who installed it? What 'software application' are you talking about? And how do you KNOW the tape drive isn't already working? What linux commands have you seen, where???

Most importantly, as you've been told before...you're using RHEL, so you need to contact RHEL support, since you're paying for it, right?
 
0 members found this post helpful.
Old 11-24-2011, 09:48 AM   #3
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
If you add an external controller card to a Redhat 5 installation, will it auto detect like windows. Are there commands that needs to be run to make the Redhat 5 OS see the controller and also the tape drive.
 
0 members found this post helpful.
Old 11-24-2011, 10:07 AM   #4
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
If you add an external controller card to a Redhat 5 installation, will it auto detect like windows. Are there commands that needs to be run to make the Redhat 5 OS see the controller and also the tape drive.
Again, you are not providing details that anyone would need to help you.

SOME cards will be detected...some may need modules built/loaded to be detected. Those commands will vary depending on what you have to do, if anything. Once the card is detected, the tape drive may (or may not) work; again, you provide no details about it, so who can tell??

And I'll restate this: you are using RedHat ENTERPRISE....CALL REDHAT SUPPORT, SINCE YOU'RE PAYING FOR IT
 
0 members found this post helpful.
Old 11-24-2011, 11:14 AM   #5
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
TBone, I am a Database consultant but i was sent to client site to help fix this problem. Do i tell the customer to contact Redhat Support when they dont even know how to use the OS. When Redhat support gets back to them, what will they do? In this part of the world where i live. Dont expect Redhat to come knock at my door. Your Replies dont leave room for people in this forum to learn. I have a last resort in which i do not want to use. This is reinstalling the Redhat OS for the customer so that all hardware will be detected. After these i will install the application software and i hope the application will see the tape drive. I left out some details because i consider it unnecessary in my post.If i mention the application, it will be of no use to you and to others in this blog.

I said the the drive is IBM 3592 ALCATRAZ-A6 http://www.cypressmfg.com/ or you can see it at http://www.cypressmfg.com/products.htm
 
0 members found this post helpful.
Old 11-24-2011, 11:21 AM   #6
corp769
Guru
 
Registered: Apr 2005
Posts: 5,807

Rep: Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996
Quote:
Originally Posted by J_U_D_E View Post
TBone, I am a Database consultant but i was sent to client site to help fix this problem. Do i tell the customer to contact Redhat Support when they dont even know how to use the OS. When Redhat support gets back to them, what will they do? In this part of the world where i live. Dont expect Redhat to come knock at my door. Your Replies dont leave room for people in this forum to learn. I have a last resort in which i do not want to use. This is reinstalling the Redhat OS for the customer so that all hardware will be detected. After these i will install the application software and i hope the application will see the tape drive. I left out some details because i consider it unnecessary in my post.If i mention the application, it will be of no use to you and to others in this blog.

I said the the drive is IBM 3592 ALCATRAZ-A6 http://www.cypressmfg.com/ or you can see it at http://www.cypressmfg.com/products.htm
So if you are this database consultant, being sent out to fix this problem, then why are you posting this thread in the first place? Sorry, but I am just pointing out the irony.... And honestly, TB0ne is correct about what he has said. Redhat is a paid support service, so I don't see why you are being sent to fix this, especially if you aren't RHCE compliant.

Edit - And please stop using the "Did you find this post helpful" in a negative way, you are hurting his percentages. Just because you aren't hearing what you want to hear, that doesn't mean to click no all the way down and hurt his numbers.

Last edited by corp769; 11-24-2011 at 11:23 AM.
 
1 members found this post helpful.
Old 11-24-2011, 11:26 AM   #7
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
TBone, I am a Database consultant but i was sent to client site to help fix this problem. Do i tell the customer to contact Redhat Support when they dont even know how to use the OS. When Redhat support gets back to them, what will they do? In this part of the world where i live. Dont expect Redhat to come knock at my door. Your Replies dont leave room for people in this forum to learn. I have a last resort in which i do not want to use. This is reinstalling the Redhat OS for the customer so that all hardware will be detected. After these i will install the application software and i hope the application will see the tape drive. I left out some details because i consider it unnecessary in my post.If i mention the application, it will be of no use to you and to others in this blog.

I said the the drive is IBM 3592 ALCATRAZ-A6 http://www.cypressmfg.com/ or you can see it at http://www.cypressmfg.com/products.htm
Actually, you did NOT say what the tape drive model was, just a 3592...re-read your first post. And there is no reason to be nasty, here...if the customer contacts RedHat, here's what will happen: they will tell them what to do/run over the phone. They won't 'knock on their door', since they won't have to. And if you don't bother providing details, NO ONE WILL BE ABLE TO HELP YOU. If you really are a consultant, how would you answer a question from a customer who said "how would I install a database on a machine? What do I need to do?", then got nasty when you asked for more details? If you want to learn, the first step is asking a good question, then engaging in getting it answered. That means, participating in a discussion, and answering questions put to you. Rather than whining about "no room to learn", try to answer the questions put to you several times. And if you're so concerned about the clients abilities to interface with RedHat, why don't YOU call on their behalf???

What, exactly, do you expect people here to do to help you?? You ask questions about a 'controller card'...what part of the answer don't you understand? Without knowing WHAT controller card, there's nothing we can tell you to get it working. How is that tape drive attached to this controller card? What have you done/tried?? Your entire problem since your first post is vague, at best. You say nothing about the application, what error(s) you're getting (if ANY at all), what you've done/tried, etc. You imply that you've run some 'linux commands', but don't say which ones, and what the results were.

RedHat support is there for this kind of thing exactly. You should NOT have to re-install the OS, and (since you're a database consultant), that's not your job anyway. You're there for the database, the customer is providing the OS/machine to run it on. AGAIN, you MIGHT have to compile/load a driver module, but since you still don't say anything about the card, how can we tell you what to do?

Google has lots on how to access/check tape drives, but again, you say NOTHING about what you've done/tried:
http://www.cyberciti.biz/faq/linux-t...command-howto/
http://www.unix.com/aix/57867-comman...ives-rmts.html

Last edited by TB0ne; 11-24-2011 at 11:29 AM.
 
1 members found this post helpful.
Old 11-24-2011, 08:27 PM   #8
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
Corp769, i strongly disagree with you. I do not think it is right to contribute to post if you have no solution to the problem. I will not add to a post just to increase my percentage. Please get me right. There are people reading these posts hoping to get a solution.

If the customer contact supports, how will they be guided. They have no knowledge of Linux. I had to create launchers on the desktop for my company's application to save them from tying commands.

I am happy to inform everyone that the controller card that was placed after the intallation of Redhat 5.X was detected. Also the OS can access the ALCATRAX 6 3592 tape drive.
Its funny that i could not see the controller or the tape drive with this command.

dmesg | more

but
The following command was helpful

mt -f /dev/nst0 status

a tape was placed in and the following command was used

mt -f /dev/nst0 load

It loaded the tape

mt -f /dev/nst0 rewind


i can confidently say now that the OS can see the tape. i will now work on reading the tape

with

tar tvf /dev/nst0

I hope this works.

I found a file in my company's software application that i think will make the application see the tape drive.

The Redhat OS is not on the network and the hostname is localhost.

i am looking at a line entry in the file that i think will solve the problem.

#---tape drive local to host 'thor' - not under device management

tape0 DEVICE="thor:/dev/rmt/2b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"


Apart from the above line entry(tape0 DEVI....) there are other entry.Do i replace
localhost with thor?
 
0 members found this post helpful.
Old 11-24-2011, 09:19 PM   #9
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
TBone, Please try not to kill this forum by refering everyone that has an issue to support. You are only helping to build their knowledge base at the expense of this forum that is open to the internet. If i go there i may likely not come back here to tell everyone that the issue is resolve. They might not solve the problem.

I disagree with the senerio you gave about "me and a customer that makes enquiry about installing a database".

Lets us transform that customer to to someone that requires urgent answers to question on this forum based on the questions i posted.

Between me and you....

Because i have gain a little experience here i will quickly reply by telling him that the Redhat OS will detect the Controller card and that particular tape drive. i mentioned.

But you will ask what controller is the person using, GO TO REDHAT SUPPORT etc and may be later you will ask for his IP address, username and password....

I am sorry if i sound nasty but you don't understand what it is to sit ifront of a workstation up to 4:17am in the morning and under pressure to resolve this before the customer comes in 3hours. All they ask is has this issue being resolve?
 
0 members found this post helpful.
Old 11-24-2011, 10:03 PM   #10
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
The ALCATRAX A6 tape drive holds two shock mounted IBM 3592, LTO, and DLT tape drives
MDR Controller and two disk drives
Fibre channel Interface.
 
0 members found this post helpful.
Old 11-25-2011, 09:21 AM   #11
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
TBone, Please try not to kill this forum by refering everyone that has an issue to support. You are only helping to build their knowledge base at the expense of this forum that is open to the internet. If i go there i may likely not come back here to tell everyone that the issue is resolve. They might not solve the problem.
RH support is there specifically TO follow through and solve problems. How will they do it? Simple...tell the user "Click here...type this in. Email me the results like this, or tell me what this says". Same way tech support ALWAYS works. You asked how you'd know if the controller was detected, and what you had to do to make it work. You did not (and STILL have not), say what kind of controller it was. And do you bother to read any replies in other threads, before you say how others are 'killing this forum'?? You imply that giving a controller model # could (somehow) let 'them' get your address/user/password, won't tell us the brand/model of controller, tape drive, etc., then actually expect an answer. Don't want to give details here? Call support...it'll just be between you and them.

And if you actually thought anything through, posts like yours kill forums...lots of traffic, no information, and lots of attitude.
Quote:
I disagree with the senerio you gave about "me and a customer that makes enquiry about installing a database". Lets us transform that customer to to someone that requires urgent answers to question on this forum based on the questions i posted.
It's exactly the same thing. If they have an urgent question, and won't give you any information HOW WOULD YOU ANSWER IT????
Quote:
Between me and you...Because i have gain a little experience here i will quickly reply by telling him that the Redhat OS will detect the Controller card and that particular tape drive. i mentioned.

But you will ask what controller is the person using, GO TO REDHAT SUPPORT etc and may be later you will ask for his IP address, username and password....

I am sorry if i sound nasty but you don't understand what it is to sit ifront of a workstation up to 4:17am in the morning and under pressure to resolve this before the customer comes in 3hours. All they ask is has this issue being resolve?
That's not the way support works, and they can't/won't give out someones user ID, and how on EARTH do you get there from asking what kind of controller card they're using?? Do you know how many customers worldwide have RHEL?? Do you honestly think anyone could call and say "Hey, I'm the guy with the xxx controller...what's my IP address and passwords?", and they'd even know WHO you were talking about, and give out anything??

You have gained NO experience, and are still missing the point. You followed the commands I posted to you in those links, and probably didn't provide controller/hardware info because you don't know anything about it. Again, if you had reservations about the customers abilities, why didn't YOU call RedHat support on their behalf?? You asked if the card will be auto-detected, and the answer I gave you still stands: SOME will..SOME won't. Some need drivers downloaded/installed/compiled, some work right off the bat. But you don't seem to understand that, and expect someone to be able to give you a solid answer, when you don't ask a decent question.

And I don't know what it's like to sit in front of a workstation at 4:17AM under pressure?? Bull...I've done this FAR longer than you have, and have been in FAR worse situations. The difference between me and you, is that I would actually COOPERATE with folks when I was trying to get an issue solved, rather than getting snotty, and not answering questions.

Last edited by TB0ne; 11-25-2011 at 09:30 AM.
 
Old 11-25-2011, 09:27 AM   #12
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
Corp769, i strongly disagree with you. I do not think it is right to contribute to post if you have no solution to the problem. I will not add to a post just to increase my percentage. Please get me right. There are people reading these posts hoping to get a solution.

If the customer contact supports, how will they be guided. They have no knowledge of Linux. I had to create launchers on the desktop for my company's application to save them from tying commands.
Again, why didn't YOU contact support for them?? And have you EVER called tech support?? They TELL YOU what to do/run, and how to do it.
Quote:
I am happy to inform everyone that the controller card that was placed after the intallation of Redhat 5.X was detected. Also the OS can access the ALCATRAX 6 3592 tape drive. Its funny that i could not see the controller or the tape drive with this command.

dmesg | more
What were you looking for with dmesg? If the controller module is loaded, you'll see it in dmesg.
Quote:
but The following command was helpful

mt -f /dev/nst0 status
a tape was placed in and the following command was used
mt -f /dev/nst0 load

It loaded the tape
mt -f /dev/nst0 rewind

i can confidently say now that the OS can see the tape. i will now work on reading the tape with
tar tvf /dev/nst0
Congratulations...you followed the commands in the links I sent you, which were easily found with a Google search, had you tried.
Quote:
I hope this works. I found a file in my company's software application that i think will make the application see the tape drive. The Redhat OS is not on the network and the hostname is localhost. i am looking at a line entry in the file that i think will solve the problem.
#---tape drive local to host 'thor' - not under device management
tape0 DEVICE="thor:/dev/rmt/2b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"

Apart from the above line entry(tape0 DEVI....) there are other entry.Do i replace localhost with thor?
It took you longer to post this reply, than it would have taken you to actually TRY putting localhost in the file, and seeing if it worked. If the tape device is attached to localhost, it MAY work, but again you are providing no details about the software, and since we don't know what it is/how it works, we can't tell you if that will work or not, can we?? This is the point you keep missing...without details, you can't get answers. If that's your company's software, you should have access to all the information you need to answer that question, since you don't want to tell anyone here what it is.
 
1 members found this post helpful.
Old 11-25-2011, 11:49 AM   #13
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
generated an entry of dmesg | more


Linux version 2.6.18-274.el5xen (mockbuild@x86-012.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Fri Jul 8 18:18:40 EDT 2011
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000ddaf0000 (usable)
2818MB HIGHMEM available.
727MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 908016
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 182270 pages, LIFO batch:31
HighMem zone: 721650 pages, LIFO batch:31
found SMP MP-table at 000f5580
DMI 2.2 present.
DMI: IBM -[622191U]-/MS-9121, BIOS -[OPE125A]- 03/04/2003
ACPI: RSDP (v000 IntelR ) @ 0x000f7460
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xdfff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xdfff3040
ACPI: ASF! (v001 BIM 0x01000000 0x00000000) @ 0xdfff6980
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xdfff6a40
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x06] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 6, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists. Total pages: 908016
Kernel command line: ro root=LABEL=/ rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0780000 soft=c0760000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3125.514 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0x00000000c312e000 - 0x00000000c712e000
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 3511700k/3632064k available (2201k kernel code, 111012k reserved, 1033k data, 184k init, 2886600k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 7823.55 BogoMIPS (lpj=15647118)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 1fc99371 00000000 00000000 00000000 80000400 00000000 00000000
CPU: After vendor identify, caps: 1fc99371 00000000 00000000 00000000 80000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 1fc99371 00000000 00000000 00000080 80000400 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU 1 irqstacks, hard=c0781000 soft=c0761000
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Brought up 2 CPUs
sizeof(vma)=88 bytes
Initializing CPU#1
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=593
checking if image is initramfs... it is
Freeing initrd memory: 6039k freed
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 4080-40bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P64A.HUBA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P64A.HUBB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0xd0000-0xd07ff could not be reserved
pnp: 00:00: iomem range 0xd3200-0xd3fff has been reserved
pnp: 00:00: iomem range 0xf0000-0xfbfff could not be reserved
pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
pnp: 00:0e: ioport range 0x4000-0x40bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f0000000-00000000
PREFETCH window 0x00000000e0000000-0x00000000e7ffffff
PCI: Bridge: 0000:02:1d.0
IO window: 9000-0000
MEM window: f2000000-00000000
PREFETCH window 0x00000000f7200000-0x00000000f72fffff
PCI: Bridge: 0000:02:1f.0
IO window: a000-0000
MEM window: f4000000-00000000
PREFETCH window 0x00000000f7300000-0x00000000f74fffff
PCI: Bridge: 0000:00:02.0
IO window: 9000-0000
MEM window: f2000000-00000000
PREFETCH window 0x00000000f7200000-0x00000000f74fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f7000000-00000000
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1322227505.664:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 8E18D703A4888BD4
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel E7505 Chipset.
agpgart: AGP aperture is 64M @ 0xec000000
brd: module loaded
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
hda: IC35L090AVV207-0, ATA DISK drive
hdb: IC35L090AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156312576 sectors (80032 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdb: max request size: 512KiB
hdb: 156312576 sectors (80032 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Initalizing network drop monitor service
Freeing unused kernel memory: 184k freed
Write protecting the kernel read-only data: 399k
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xf7100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
Fusion MPT base driver 3.04.18rh
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18rh
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 32 (level, low) -> IRQ 20
mptbase: ioc0: Initiating bringup
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input0
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1
usb 2-2: new low speed USB device using uhci_hcd and address 3
ioc0: LSI53C1030 B2: Capabilities={Initiator}
usb 2-2: configuration #1 chosen from 1 choice
input: LiteON HP Basic USB Keyboard as /class/input/input1
input: USB HID v1.00 Keyboard [LiteON HP Basic USB Keyboard] on usb-0000:00:1d.0-2
scsi0 : ioc0: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=20
ACPI: PCI Interrupt 0000:04:03.1[B] -> GSI 33 (level, low) -> IRQ 21
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 B2: Capabilities={Initiator}
scsi1 : ioc1: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=21
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1322227540.450:2): selinux=0 auid=4294967295 ses=4294967295
EDAC MC: Ver: 2.0.1 Jul 8 2011
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
input: PC Speaker as /class/input/input2
QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 56 (level, low) -> IRQ 22
qla2xxx 0000:03:03.0: Found an ISP2312, irq 22, iobase 0xee08a000
qla2xxx 0000:03:03.0: Configuring PCI space...
qla2xxx 0000:03:03.0: Configure NVRAM parameters...
qla2xxx 0000:03:03.0: Verifying loaded RISC code...
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 23
qla2xxx 0000:03:03.0: Allocated (412 KB) for firmware dump...
scsi2 : qla2xxx
qla2xxx 0000:03:03.0:
QLogic Fibre Channel HBA Driver: 8.03.07.03.05.07-k
QLogic QLA2342 - 133MHz PCI-X to 2Gb FC, Dual Channel
ISP2312: PCI-X (100 MHz) @ 0000:03:03.0 hdma-, host#=2, fw=3.03.26 IPX
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 57 (level, low) -> IRQ 24
qla2xxx 0000:03:03.1: Found an ISP2312, irq 24, iobase 0xee08c000
qla2xxx 0000:03:03.1: Configuring PCI space...
qla2xxx 0000:03:03.1: Configure NVRAM parameters...
qla2xxx 0000:03:03.0: LIP reset occured (f8f7).
qla2xxx 0000:03:03.0: LIP occured (f8f7).
qla2xxx 0000:03:03.1: Verifying loaded RISC code...
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
qla2xxx 0000:03:03.1: Allocated (412 KB) for firmware dump...
scsi3 : qla2xxx
qla2xxx 0000:03:03.1:
QLogic Fibre Channel HBA Driver: 8.03.07.03.05.07-k
QLogic QLA2342 - 133MHz PCI-X to 2Gb FC, Dual Channel
ISP2312: PCI-X (100 MHz) @ 0000:03:03.1 hdma-, host#=3, fw=3.03.26 IPX
tg3.c:v3.116 (December 3, 2010)<6>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 25
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1f.5 to 64
tg3 0000:03:01.0: eth0: eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:0c:76:16:3c:d8
tg3 0000:03:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:01.0: eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
intel8x0_measure_ac97_clock: measured 59604 usecs
intel8x0: clocking to 48000
qla2xxx 0000:03:03.0: LOOP UP detected (2 Gbps).
Vendor: IBM Model: 03592E05 Rev: 1A27
Type: Sequential-Access ANSI SCSI revision: 03
Vendor: IBM Model: 03592E05 Rev: 1A27
Type: Sequential-Access ANSI SCSI revision: 03
scsi 2:0:0:0: Attached scsi generic sg0 type 1
scsi 2:0:1:0: Attached scsi generic sg1 type 1
st: Version 20070203, fixed bufsize 32768, s/g segs 256
st 2:0:0:0: Attached scsi tape st0
st0: try direct i/o: yes (alignment 512 B)
st 2:0:1:0: Attached scsi tape st1
st1: try direct i/o: yes (alignment 512 B)
st0: Block limits 1 - 2097152 bytes.
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
loop: loaded (max 8 devices)
EXT3 FS on hda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 8289532k swap on /dev/hda3. Priority:-1 extents:1 across:8289532k
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
IPv6: Loaded, but administratively disabled, reboot required to enable
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ip6_tables: (C) 2000-2006 Netfilter Core Team
device vif0.0 entered promiscuous mode
New device vif0.0 does not support netpoll
Disabling netpoll for xenbr0
xenbr0: port 1(vif0.0) entering forwarding state
tg3 0000:03:01.0: peth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:01.0: peth0: Flow control is on for TX and on for RX
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering forwarding state
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usbcore: registered new driver usb-storage
usb-storage: waiting for device to settle before scanning
USB Mass Storage support registered.
Vendor: LG Model: USB Drive Rev: 1100
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 4:0:0:0: Attached scsi removable disk sda
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
 
0 members found this post helpful.
Old 11-25-2011, 12:11 PM   #14
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 14,592

Rep: Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559Reputation: 2559
Quote:
Originally Posted by J_U_D_E View Post
generated an entry of dmesg | more


Linux version 2.6.18-274.el5xen (mockbuild@x86-012.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Fri Jul 8 18:18:40 EDT 2011
QLogic Fibre Channel HBA Driver: 8.03.07.03.05.07-k
QLogic QLA2342 - 133MHz PCI-X to 2Gb FC, Dual Channel
ISP2312: PCI-X (100 MHz) @ 0000:03:03.0 hdma-, host#=2, fw=3.03.26 IPX
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 57 (level, low) -> IRQ 24
qla2xxx 0000:03:03.1: Found an ISP2312, irq 24, iobase 0xee08c000
qla2xxx 0000:03:03.1: Configuring PCI space...
qla2xxx 0000:03:03.1: Configure NVRAM parameters...
qla2xxx 0000:03:03.0: LIP reset occured (f8f7).
qla2xxx 0000:03:03.0: LIP occured (f8f7).
qla2xxx 0000:03:03.1: Verifying loaded RISC code...
...and the controller is a QLogic controller, detected by dmesg....
Quote:
qla2xxx 0000:03:03.0: LOOP UP detected (2 Gbps).
Vendor: IBM Model: 03592E05 Rev: 1A27
Type: Sequential-Access ANSI SCSI revision: 03
Vendor: IBM Model: 03592E05 Rev: 1A27
Type: Sequential-Access ANSI SCSI revision: 03
scsi 2:0:0:0: Attached scsi generic sg0 type 1
scsi 2:0:1:0: Attached scsi generic sg1 type 1
st: Version 20070203, fixed bufsize 32768, s/g segs 256
st 2:0:0:0: Attached scsi tape st0
st0: try direct i/o: yes (alignment 512 B)
st 2:0:1:0: Attached scsi tape st1
st1: try direct i/o: yes (alignment 512 B)
st0: Block limits 1 - 2097152 bytes.
...and the two tape drives are connected, shown attached to the controller, and also seen in dmesg.

If you had all of this, why did you ask whether the controller/drives had to be configured, since it was obvious they already were???
 
Old 11-25-2011, 10:44 PM   #15
J_U_D_E
LQ Newbie
 
Registered: Jan 2008
Posts: 29

Original Poster
Rep: Reputation: 0
Dont what to bore anyone here with the name of the software application. Its a software for seismic acquisition and processing. I can use root user in the Redhat OS to read, write to tape,load tape and put tape offline. But the user(created by root) in which the software application is installed can not read and write to tape. I tried to use the same command that i used for root. I get permission denied. It seems that user can not use the device.

mt -f /dev/nst0 load

I modified the user to be a Group member with root.

The error persit.

If i can get the user to read and write to tape. I can use the parameter for the line entry in the device.tts

I found this file the file device.tts in which the software application uses to read from and write to tape. There is a line entry highlighted in bold that i edited. That should be where the problem is.

the file below is device.tts The machine hostname is localhost

# Each line must begin with a Logical Device name and is followed by device or device pool attributes
# in any order. For devices under PMX management, attributes are cumulative, with those defined here
# taking precedence over settings in the rdb/config_file. A line may be no longer than 256 characters.

# ---------------------- tape drives local to host 'thor' - not under device management
stacker_8mm DEVICE="thor:/dev/rmt/4b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="STACKER" DEVCAP=10
local8mm_1 DEVICE="thor:/dev/rmt/1b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"
local8mm_2 DEVICE="thor:/dev/rmt/0b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"
local8mm_2f DEVICE="thor:/dev/rmt/0b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE" CONFIG="FMNT"
lwden_norwnd DEVICE="thor:/dev/rmt/0lbr" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"
tape0 DEVICE="localhost:/dev/nst0" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"
# ---------------------- remote tape drives - not under device management
juno_8mm DEVICE="juno:/dev/rmt/0b" DPOOL="8mm" CLIENT="ProClient" DEVTYPE="SIMPLE"
hera_8mm DEVICE="hera:/dev/rmt/0b" DPOOL="8mm" REMHOME="/apps/ProMAX" CLIENT="ProClient" DEVTYPE="SIMPLE"
zeus_8mm DEVICE="zeus:/dev/rmt/0b" DPOOL="8mm" TMHOST="thor:0.1" CLIENT="ProClient" DEVTYPE="SIMPLE"

# ---------------------- devices under PMX resource management
3490_1 DPOOL="3490_dp"
3490_2 DPOOL="3490_dp"
3490_test DPOOL="3490_dp" OPHOST="thor" CONFIG="FMNT+NUNL" DEBUG="ALL"
thor_3490 DEVICE="thor:/dev/rmt/2b" DPOOL="3490_dp"
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
configure FC tape drives on Redhat AS 4 nappy911 Linux - Hardware 1 06-12-2008 09:05 PM
Problem in using tape drive in Redhat dark justice Linux - Newbie 2 01-11-2006 01:04 PM
how to add tape drive to redhat 8.0? chanys Linux - General 2 03-05-2003 04:34 PM
Tape Drive on RedHat Zyanid Linux - Hardware 0 08-23-2002 03:22 AM
install tape drive on Redhat 7.3 wangxiuy Linux - Hardware 3 07-25-2002 04:17 AM


All times are GMT -5. The time now is 01:33 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration