LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices



Reply
 
Search this Thread
Old 07-20-2010, 12:59 AM   #1
d-mcclean
LQ Newbie
 
Registered: Jan 2010
Posts: 6

Rep: Reputation: 0
Question Compatibility of NTSC Tuner on Sony VAIO PCV-RZ24G


Does anyone know how to get Ubuntu 10.04 to recognize the NTSC tuner card on my Sony VAIO PCV-RZ24G, Pentium 4?
Here's the output of DSMEG, kernal version, and funny thing; my /sbin/lspcmcia didn't output anything.

2.6.32-23-generic
[ 0.988448] isapnp: No Plug & Play device found
[ 0.988672] scsi 0:0:0:0: Direct-Access ATA ST380021A 3.10 PQ: 0 ANSI: 5
[ 0.988925] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.989163] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.989228] sd 0:0:0:0: [sda] Write Protect is off
[ 0.989233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.989266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.989473] sda:
[ 1.004101] usb 1-1: configuration #1 chosen from 1 choice
[ 1.006216] sda1 sda2 < sda5 >
[ 1.028647] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.116019] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.152265] ata2.00: ATAPI: SONY DVD RW DW-U12A, 2.0a, max UDMA/33
[ 1.168280] ata2.00: configured for UDMA/33
[ 1.170176] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-U12A 2.0a PQ: 0 ANSI: 5
[ 1.174284] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 1.174289] Uniform CD-ROM driver Revision: 3.20
[ 1.174430] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.174515] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.174579] Freeing unused kernel memory: 660k freed
[ 1.175407] Write protecting the kernel text: 4680k
[ 1.175441] Write protecting the kernel read-only data: 1840k
[ 1.207899] udev: starting version 151
[ 1.286793] usb 1-2: configuration #1 chosen from 1 choice
[ 1.287176] hub 1-2:1.0: USB hub found
[ 1.287492] hub 1-2:1.0: 4 ports detected
[ 1.482593] Floppy drive(s): fd0 is 1.44M
[ 1.500266] FDC 0 is a post-1991 82077
[ 1.529822] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 1.530065] alloc irq_desc for 18 on node -1
[ 1.530069] alloc kstat_irqs on node -1
[ 1.530080] tulip 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.530679] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
[ 1.554528] eth0: ADMtek Comet rev 17 at Port 0x8800, 00:22:6b:bf:23:1d, IRQ 18.
[ 1.569044] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 1.573808] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.573847] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.574171] Initializing USB Mass Storage driver...
[ 1.578878] ohci1394 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.579243] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.579518] 8139too Fast Ethernet driver 0.9.28
[ 1.579583] usbcore: registered new interface driver usb-storage
[ 1.579592] USB Mass Storage support registered.
[ 1.580240] usb-storage: device found at 2
[ 1.580244] usb-storage: waiting for device to settle before scanning
[ 1.634108] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[d2000000-d20007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.644593] alloc irq_desc for 17 on node -1
[ 1.644598] alloc kstat_irqs on node -1
[ 1.644609] 8139too 0000:00:12.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.645819] eth1: RealTek RTL8139 at 0x8000, 00:e0:18:ef:97:59, IRQ 17
[ 1.684228] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.684236] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.701269] usb 1-6: configuration #1 chosen from 2 choices
[ 1.728967] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1.729386] usb-storage: device found at 6
[ 1.729390] usb-storage: waiting for device to settle before scanning
[ 2.032025] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 2.212019] usb 3-2: device descriptor read/64, error -62
[ 2.496019] usb 3-2: device descriptor read/64, error -62
[ 2.776035] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 2.916192] ieee1394: Host added: ID:BUS[0-00:1023] GUID[080046030151f4ad]
[ 2.956039] usb 3-2: device descriptor read/64, error -62
[ 3.240039] usb 3-2: device descriptor read/64, error -62
[ 3.520053] usb 3-2: new low speed USB device using ohci_hcd and address 4
[ 3.928019] usb 3-2: device not accepting address 4, error -62
[ 4.104017] usb 3-2: new low speed USB device using ohci_hcd and address 5
[ 4.512013] usb 3-2: device not accepting address 5, error -62
[ 4.512024] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 4.816022] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 4.837517] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 4.849792] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 143646
[ 4.857018] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 138655
[ 4.888751] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 395370
[ 4.890528] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1760
[ 4.904054] EXT4-fs (sda1): 4 orphan inodes deleted
[ 4.904060] EXT4-fs (sda1): recovery complete
[ 5.039471] usb 2-2: configuration #1 chosen from 1 choice
[ 5.064675] usbcore: registered new interface driver hiddev
[ 5.070760] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3
[ 5.071002] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:03.0-2/input0
[ 5.081325] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input4
[ 5.081621] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:03.0-2/input1
[ 5.109604] input: Microsoft Microsoft® 2.4GHz Transceiver v6.0 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.2/input/input5
[ 5.109814] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v6.0] on usb-0000:00:03.0-2/input2
[ 5.109853] usbcore: registered new interface driver usbhid
[ 5.109857] usbhid: v2.6:USB HID core driver
[ 5.190191] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.580374] usb-storage: device scan complete
[ 6.580938] scsi 2:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4
[ 6.581495] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.582163] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.582909] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.582913] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 6.582917] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.584409] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.584415] sdb:
[ 6.728227] usb-storage: device scan complete
[ 6.743688] scsi 3:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 6.744300] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.745538] sd 3:0:0:0: [sdc] 950209 4096-byte logical blocks: (3.89 GB/3.62 GiB)
[ 6.746031] sd 3:0:0:0: [sdc] Write Protect is off
[ 6.746036] sd 3:0:0:0: [sdc] Mode Sense: 68 00 00 08
[ 6.746039] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 6.747414] sd 3:0:0:0: [sdc] 950209 4096-byte logical blocks: (3.89 GB/3.62 GiB)
[ 6.747909] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 6.747915] sdc: sdc1
[ 6.750037] sd 3:0:0:0: [sdc] 950209 4096-byte logical blocks: (3.89 GB/3.62 GiB)
[ 6.750700] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 6.750706] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 7.165187] sdb1
[ 7.166790] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.166799] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 25.639340] udev: starting version 151
[ 25.712781] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
[ 25.737148] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[ 25.834601] lp: driver loaded but no devices found
[ 25.955360] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.961712] Linux agpgart interface v0.103
[ 25.979951] vga16fb: initializing
[ 25.979959] vga16fb: mapped to 0xc00a0000
[ 25.980112] fb0: VGA16 VGA frame buffer device
[ 26.484112] type=1505 audit(1279242846.270:2): operation="profile_load" pid=519 name="/sbin/dhclient3"
[ 26.484707] type=1505 audit(1279242846.270:3): operation="profile_load" pid=519 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 26.485032] type=1505 audit(1279242846.270:4): operation="profile_load" pid=519 name="/usr/lib/connman/scripts/dhclient-script"
[ 26.516108] nvidia: module license 'NVIDIA' taints kernel.
[ 26.516114] Disabling lock debugging due to kernel taint
[ 27.616071] agpgart-sis 0000:00:00.0: SiS chipset [1039/0651]
[ 27.630125] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
[ 27.651419] parport_pc 00:0a: reported by Plug and Play ACPI
[ 27.651471] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 27.826178] lp0: using parport0 (interrupt-driven).
[ 27.858082] ppdev: user-space parallel port driver
[ 27.890374] type=1505 audit(1279242847.674:5): operation="profile_load" pid=698 name="/usr/share/gdm/guest-session/Xsession"
[ 27.927787] type=1505 audit(1279242847.710:6): operation="profile_replace" pid=702 name="/sbin/dhclient3"
[ 27.928806] type=1505 audit(1279242847.714:7): operation="profile_replace" pid=702 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 27.929144] type=1505 audit(1279242847.714:8): operation="profile_replace" pid=702 name="/usr/lib/connman/scripts/dhclient-script"
[ 27.977163] type=1505 audit(1279242847.762:9): operation="profile_load" pid=708 name="/usr/bin/evince"
[ 28.033563] type=1505 audit(1279242847.818:10): operation="profile_load" pid=708 name="/usr/bin/evince-previewer"
[ 28.063114] type=1505 audit(1279242847.846:11): operation="profile_load" pid=708 name="/usr/bin/evince-thumbnailer"
[ 28.139074] eth1: link down
[ 28.139708] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.387403] irq 17: nobody cared (try booting with the "irqpoll" option)
[ 28.387412] Pid: 737, comm: dbus-daemon-lau Tainted: P 2.6.32-23-generic #37-Ubuntu
[ 28.387415] Call Trace:
[ 28.387428] [<c0589bc6>] ? printk+0x1d/0x1f
[ 28.387435] [<c01a15cc>] __report_bad_irq+0x2c/0x90
[ 28.387441] [<c019fd04>] ? handle_IRQ_event+0x54/0x150
[ 28.387444] [<c01a1780>] note_interrupt+0x150/0x190
[ 28.387448] [<c01a1d8c>] handle_fasteoi_irq+0xac/0xd0
[ 28.387454] [<c01059ed>] handle_irq+0x1d/0x30
[ 28.387459] [<c059069c>] do_IRQ+0x4c/0xc0
[ 28.387463] [<c0103a30>] common_interrupt+0x30/0x40
[ 28.387465] handlers:
[ 28.387467] [<f8124350>] (rtl8139_interrupt+0x0/0x190 [8139too])
[ 28.387486] Disabling IRQ #17
[ 28.450887] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 28.461272] Console: switching to colour frame buffer device 80x30
[ 28.776197] intel8x0_measure_ac97_clock: measured 56134 usecs (2700 samples)
[ 28.776203] intel8x0: clocking to 48000
[ 28.778193] nvidia 0000:00:0e.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 28.778547] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009
[ 30.448950] RPC: Registered udp transport module.
[ 30.448955] RPC: Registered tcp transport module.
[ 30.448957] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 30.490614] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 31.110556] 0000:00:0f.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 31.110583] eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
[ 31.179074] svc: failed to register lockdv1 RPC service (errno 97).
[ 31.195775] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 31.214676] NFSD: starting 90-second grace period
[ 31.300764] irq 17: nobody cared (try booting with the "irqpoll" option)
[ 31.300776] Pid: 1141, comm: rpcinfo Tainted: P 2.6.32-23-generic #37-Ubuntu
[ 31.300779] Call Trace:
[ 31.300793] [<c0589bc6>] ? printk+0x1d/0x1f
[ 31.300801] [<c01a15cc>] __report_bad_irq+0x2c/0x90
[ 31.300807] [<c019fd04>] ? handle_IRQ_event+0x54/0x150
[ 31.300811] [<c01a1780>] note_interrupt+0x150/0x190
[ 31.300815] [<c01a1d8c>] handle_fasteoi_irq+0xac/0xd0
[ 31.300822] [<c01059ed>] handle_irq+0x1d/0x30
[ 31.300828] [<c059069c>] do_IRQ+0x4c/0xc0
[ 31.300832] [<c0103a30>] common_interrupt+0x30/0x40
[ 31.300838] [<c01e6085>] ? do_wp_page+0x1f5/0x820
[ 31.300844] [<c01305b5>] ? kmap_atomic_prot+0xd5/0xf0
[ 31.300848] [<c01e6e0c>] handle_mm_fault+0x2fc/0x390
[ 31.300853] [<c058e70d>] do_page_fault+0x10d/0x3a0
[ 31.300856] [<c05906a5>] ? do_IRQ+0x55/0xc0
[ 31.300862] [<c01df3bb>] ? sys_mmap_pgoff+0x12b/0x240
[ 31.300866] [<c058e600>] ? do_page_fault+0x0/0x3a0
[ 31.300870] [<c058c603>] error_code+0x73/0x80
[ 31.300872] handlers:
[ 31.300874] [<f8124350>] (rtl8139_interrupt+0x0/0x190 [8139too])
[ 31.300898] [<f8f6a4d0>] (nv_kern_isr+0x0/0xc0 [nvidia])
[ 31.301191] Disabling IRQ #17
[ 38.704030] eth0: no IPv6 routers present
[ 39.516072] usb 3-2: new low speed USB device using ohci_hcd and address 6
[ 39.696048] usb 3-2: device descriptor read/64, error -62
[ 39.972032] usb 3-2: device descriptor read/64, error -62
[ 40.252036] usb 3-2: new low speed USB device using ohci_hcd and address 7
[ 40.432044] usb 3-2: device descriptor read/64, error -62
[ 40.726925] usb 3-2: device descriptor read/64, error -62
[ 41.004053] usb 3-2: new low speed USB device using ohci_hcd and address 8
[ 41.412026] usb 3-2: device not accepting address 8, error -62
[ 41.588041] usb 3-2: new low speed USB device using ohci_hcd and address 9
[ 41.996028] usb 3-2: device not accepting address 9, error -62
[ 41.996057] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 113.081183] usb 1-2: USB disconnect, address 3
[ 113.520062] usb 1-2: new high speed USB device using ehci_hcd and address 7
[ 113.653959] usb 1-2: configuration #1 chosen from 1 choice
[ 113.654708] hub 1-2:1.0: USB hub found
[ 113.655015] hub 1-2:1.0: 4 ports detected
[ 114.000154] usb 3-2: new low speed USB device using ohci_hcd and address 10
[ 114.184054] usb 3-2: device descriptor read/64, error -62
[ 114.472057] usb 3-2: device descriptor read/64, error -62
[ 114.752058] usb 3-2: new low speed USB device using ohci_hcd and address 11
[ 114.936047] usb 3-2: device descriptor read/64, error -62
[ 115.224062] usb 3-2: device descriptor read/64, error -62
[ 115.504058] usb 3-2: new low speed USB device using ohci_hcd and address 12
[ 115.912050] usb 3-2: device not accepting address 12, error -62
[ 116.088046] usb 3-2: new low speed USB device using ohci_hcd and address 13
[ 116.496937] usb 3-2: device not accepting address 13, error -62
[ 116.496967] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 167.500134] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 167.633917] usb 1-3: configuration #1 chosen from 1 choice
[ 167.637806] scsi4 : SCSI emulation for USB Mass Storage devices
[ 167.657017] usb-storage: device found at 8
[ 167.657021] usb-storage: waiting for device to settle before scanning
[ 167.980045] usb 3-2: new low speed USB device using ohci_hcd and address 14
[ 168.164035] usb 3-2: device descriptor read/64, error -62
[ 168.452040] usb 3-2: device descriptor read/64, error -62
[ 168.732043] usb 3-2: new low speed USB device using ohci_hcd and address 15
[ 168.916039] usb 3-2: device descriptor read/64, error -62
[ 169.204052] usb 3-2: device descriptor read/64, error -62
[ 169.484099] usb 3-2: new low speed USB device using ohci_hcd and address 16
[ 169.892042] usb 3-2: device not accepting address 16, error -62
[ 170.068049] usb 3-2: new low speed USB device using ohci_hcd and address 17
[ 170.476023] usb 3-2: device not accepting address 17, error -62
[ 170.476051] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 172.656365] usb-storage: device scan complete
[ 172.656956] scsi 4:0:0:0: Direct-Access Seagate FreeAgent 0132 PQ: 0 ANSI: 4
[ 172.657535] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 172.683434] sd 4:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 172.684355] sd 4:0:0:0: [sdd] Write Protect is off
[ 172.684362] sd 4:0:0:0: [sdd] Mode Sense: 2d 08 00 00
[ 172.684365] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 172.685954] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 172.685967] sdd: sdd1
[ 172.726454] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 172.726464] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 211.400149] usb 3-2: new low speed USB device using ohci_hcd and address 18
[ 211.584056] usb 3-2: device descriptor read/64, error -62
[ 211.872195] usb 3-2: device descriptor read/64, error -62
[ 212.152057] usb 3-2: new low speed USB device using ohci_hcd and address 19
[ 212.336063] usb 3-2: device descriptor read/64, error -62
[ 212.624058] usb 3-2: device descriptor read/64, error -62
[ 212.904054] usb 3-2: new low speed USB device using ohci_hcd and address 20
[ 213.312041] usb 3-2: device not accepting address 20, error -62
[ 213.488065] usb 3-2: new low speed USB device using ohci_hcd and address 21
[ 213.896055] usb 3-2: device not accepting address 21, error -62
[ 213.896083] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 444.410037] sdc: detected capacity change from 3892056064 to 0
[ 455.320222] usb 1-6: USB disconnect, address 6
[ 478.004157] usb 1-6: new high speed USB device using ehci_hcd and address 9
[ 478.138021] usb 1-6: configuration #1 chosen from 2 choices
[ 478.160511] scsi5 : SCSI emulation for USB Mass Storage devices
[ 478.167004] usb-storage: device found at 9
[ 478.167008] usb-storage: waiting for device to settle before scanning
[ 478.488037] usb 3-2: new low speed USB device using ohci_hcd and address 22
[ 478.668050] usb 3-2: device descriptor read/64, error -62
[ 478.952033] usb 3-2: device descriptor read/64, error -62
[ 479.232037] usb 3-2: new low speed USB device using ohci_hcd and address 23
[ 479.412033] usb 3-2: device descriptor read/64, error -62
[ 479.700132] usb 3-2: device descriptor read/64, error -62
[ 479.980072] usb 3-2: new low speed USB device using ohci_hcd and address 24
[ 480.388024] usb 3-2: device not accepting address 24, error -62
[ 480.564053] usb 3-2: new low speed USB device using ohci_hcd and address 25
[ 480.972033] usb 3-2: device not accepting address 25, error -62
[ 480.972060] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 483.169469] usb-storage: device scan complete
[ 483.172349] scsi 5:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 483.173155] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 483.203612] sd 5:0:0:0: [sdc] 1982464 2048-byte logical blocks: (4.06 GB/3.78 GiB)
[ 483.206294] sd 5:0:0:0: [sdc] Write Protect is off
[ 483.206301] sd 5:0:0:0: [sdc] Mode Sense: 68 00 00 08
[ 483.206305] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 483.211316] sd 5:0:0:0: [sdc] 1982464 2048-byte logical blocks: (4.06 GB/3.78 GiB)
[ 483.212334] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 483.212346] sdc: sdc1 sdc2
[ 483.221713] sd 5:0:0:0: [sdc] 1982464 2048-byte logical blocks: (4.06 GB/3.78 GiB)
[ 483.222666] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 483.222676] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 484.053976] FAT: invalid media value (0x2f)
[ 484.053984] VFS: Can't find a valid FAT filesystem on dev sdc1.
[ 484.754393] FAT: invalid media value (0x2f)
[ 484.754402] VFS: Can't find a valid FAT filesystem on dev sdc1.
[ 487.690256] FAT: invalid media value (0x2f)
[ 487.690265] VFS: Can't find a valid FAT filesystem on dev sdc1.
[ 488.257254] FAT: invalid media value (0x2f)
[ 488.257261] VFS: Can't find a valid FAT filesystem on dev sdc1.
[ 1138.816411] usb 1-2.4: new high speed USB device using ehci_hcd and address 10
[ 1138.909189] usb 1-2.4: configuration #1 chosen from 1 choice
[ 1138.937408] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1138.947666] usb-storage: device found at 10
[ 1138.947670] usb-storage: waiting for device to settle before scanning
[ 1139.265063] usb 3-2: new low speed USB device using ohci_hcd and address 26
[ 1139.448064] usb 3-2: device descriptor read/64, error -62
[ 1139.732041] usb 3-2: device descriptor read/64, error -62
[ 1140.012048] usb 3-2: new low speed USB device using ohci_hcd and address 27
[ 1140.196037] usb 3-2: device descriptor read/64, error -62
[ 1140.484043] usb 3-2: device descriptor read/64, error -62
[ 1140.764050] usb 3-2: new low speed USB device using ohci_hcd and address 28
[ 1141.172458] usb 3-2: device not accepting address 28, error -62
[ 1141.348514] usb 3-2: new low speed USB device using ohci_hcd and address 29
[ 1141.756037] usb 3-2: device not accepting address 29, error -62
[ 1141.756064] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 1143.949097] usb-storage: device scan complete
[ 1143.952647] scsi 6:0:0:0: Direct-Access Palm Pre 0000 PQ: 0 ANSI: 2
[ 1143.959451] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1143.968594] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 1254.940069] usb 3-2: new low speed USB device using ohci_hcd and address 30
[ 1255.124061] usb 3-2: device descriptor read/64, error -62
[ 1255.412072] usb 3-2: device descriptor read/64, error -62
[ 1255.692060] usb 3-2: new low speed USB device using ohci_hcd and address 31
[ 1255.876045] usb 3-2: device descriptor read/64, error -62
[ 1256.164062] usb 3-2: device descriptor read/64, error -62
[ 1256.444058] usb 3-2: new low speed USB device using ohci_hcd and address 32
[ 1256.852044] usb 3-2: device not accepting address 32, error -62
[ 1257.028062] usb 3-2: new low speed USB device using ohci_hcd and address 33
[ 1257.436420] usb 3-2: device not accepting address 33, error -62
[ 1257.436457] hub 3-0:1.0: unable to enumerate USB device on port 2
[13009.687778] usb 1-2.4: USB disconnect, address 10
[68714.939520] usb 1-6: USB disconnect, address 9
[76468.036060] usb 3-2: new low speed USB device using ohci_hcd and address 34
[76468.220057] usb 3-2: device descriptor read/64, error -62
[76468.508080] usb 3-2: device descriptor read/64, error -62
[76468.788201] usb 3-2: new low speed USB device using ohci_hcd and address 35
[76468.972050] usb 3-2: device descriptor read/64, error -62
[76469.264056] usb 3-2: device descriptor read/64, error -62
[76469.544070] usb 3-2: new low speed USB device using ohci_hcd and address 36
[76469.952045] usb 3-2: device not accepting address 36, error -62
[76470.128062] usb 3-2: new low speed USB device using ohci_hcd and address 37
[76470.536057] usb 3-2: device not accepting address 37, error -62
[76470.536086] hub 3-0:1.0: unable to enumerate USB device on port 2
[79922.697845] usb 1-1: USB disconnect, address 2
[80972.308066] usb 3-2: new low speed USB device using ohci_hcd and address 38
[80972.492122] usb 3-2: device descriptor read/64, error -62
[80972.780073] usb 3-2: device descriptor read/64, error -62
[80973.060058] usb 3-2: new low speed USB device using ohci_hcd and address 39
[80973.244053] usb 3-2: device descriptor read/64, error -62
[80973.532058] usb 3-2: device descriptor read/64, error -62
[80973.812061] usb 3-2: new low speed USB device using ohci_hcd and address 40
[80974.220045] usb 3-2: device not accepting address 40, error -62
[80974.396055] usb 3-2: new low speed USB device using ohci_hcd and address 41
[80974.804047] usb 3-2: device not accepting address 41, error -62
[80974.804077] hub 3-0:1.0: unable to enumerate USB device on port 2
[83838.884048] usb 1-6: new high speed USB device using ehci_hcd and address 11
[83839.022769] usb 1-6: configuration #1 chosen from 4 choices
[83840.020038] usb 3-2: new low speed USB device using ohci_hcd and address 42
[83840.200160] usb 3-2: device descriptor read/64, error -62
[83840.488053] usb 3-2: device descriptor read/64, error -62
[83840.768033] usb 3-2: new low speed USB device using ohci_hcd and address 43
[83840.948047] usb 3-2: device descriptor read/64, error -62
[83841.232037] usb 3-2: device descriptor read/64, error -62
[83841.512045] usb 3-2: new low speed USB device using ohci_hcd and address 44
[83841.920090] usb 3-2: device not accepting address 44, error -62
[83842.096038] usb 3-2: new low speed USB device using ohci_hcd and address 45
[83842.504041] usb 3-2: device not accepting address 45, error -62
[83842.504070] hub 3-0:1.0: unable to enumerate USB device on port 2
[83853.128726] usb 3-2: new low speed USB device using ohci_hcd and address 46
[83853.312151] usb 3-2: device descriptor read/64, error -62
[83853.596037] usb 3-2: device descriptor read/64, error -62
[83853.876035] usb 3-2: new low speed USB device using ohci_hcd and address 47
[83854.056036] usb 3-2: device descriptor read/64, error -62
[83854.344061] usb 3-2: device descriptor read/64, error -62
[83854.624052] usb 3-2: new low speed USB device using ohci_hcd and address 48
[83855.032021] usb 3-2: device not accepting address 48, error -62
[83855.208081] usb 3-2: new low speed USB device using ohci_hcd and address 49
[83855.616034] usb 3-2: device not accepting address 49, error -62
[83855.616062] hub 3-0:1.0: unable to enumerate USB device on port 2
[86348.950363] usb 1-6: USB disconnect, address 11
[268149.556371] usb 1-2.1: new high speed USB device using ehci_hcd and address 12
[268149.649512] usb 1-2.1: configuration #1 chosen from 2 choices
[268149.680080] scsi7 : SCSI emulation for USB Mass Storage devices
[268149.685159] usb-storage: device found at 12
[268149.685163] usb-storage: waiting for device to settle before scanning
[268151.532073] usb 3-2: new low speed USB device using ohci_hcd and address 50
[268151.716072] usb 3-2: device descriptor read/64, error -62
[268152.004067] usb 3-2: device descriptor read/64, error -62
[268152.284288] usb 3-2: new low speed USB device using ohci_hcd and address 51
[268152.468100] usb 3-2: device descriptor read/64, error -62
[268152.760068] usb 3-2: device descriptor read/64, error -62
[268153.040089] usb 3-2: new low speed USB device using ohci_hcd and address 52
[268153.448038] usb 3-2: device not accepting address 52, error -62
[268153.624057] usb 3-2: new low speed USB device using ohci_hcd and address 53
[268154.032043] usb 3-2: device not accepting address 53, error -62
[268154.032073] hub 3-0:1.0: unable to enumerate USB device on port 2
[268154.688430] usb-storage: device scan complete
[268154.703714] scsi 7:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[268154.706650] sd 7:0:0:0: Attached scsi generic sg2 type 0
[268154.715436] sd 7:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[268154.718165] sd 7:0:0:0: [sdb] Write Protect is off
[268154.718172] sd 7:0:0:0: [sdb] Mode Sense: 68 00 00 08
[268154.718176] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[268154.724394] sd 7:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[268154.726217] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[268154.726230] sdb: sdb1
[268154.733373] sd 7:0:0:0: [sdb] 1941441 4096-byte logical blocks: (7.95 GB/7.40 GiB)
[268154.734077] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[268154.734088] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[268208.776057] usb 3-2: new low speed USB device using ohci_hcd and address 54
[268208.960047] usb 3-2: device descriptor read/64, error -62
[268209.244077] usb 3-2: device descriptor read/64, error -62
[268209.524057] usb 3-2: new low speed USB device using ohci_hcd and address 55
[268209.704059] usb 3-2: device descriptor read/64, error -62
[268209.988061] usb 3-2: device descriptor read/64, error -62
[268210.268061] usb 3-2: new low speed USB device using ohci_hcd and address 56
[268210.676036] usb 3-2: device not accepting address 56, error -62
[268210.852079] usb 3-2: new low speed USB device using ohci_hcd and address 57
[268211.260045] usb 3-2: device not accepting address 57, error -62
[268211.260075] hub 3-0:1.0: unable to enumerate USB device on port 2
[268352.072415] usb 1-2.1: reset high speed USB device using ehci_hcd and address 12
[268358.897396] __ratelimit: 15 callbacks suppressed
[268358.897403] rhythmbox[24307]: segfault at 6f432065 ip 0060c32c sp b077f0b0 error 4 in libgobject-2.0.so.0.2400.1[5e6000+3d000]
(Had to delete some ending script because post was too large)
 
Old 07-20-2010, 05:59 PM   #2
jefro
Guru
 
Registered: Mar 2008
Posts: 12,093

Rep: Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521
Does the card insert to PCMCIA?
 
Old 07-20-2010, 08:27 PM   #3
d-mcclean
LQ Newbie
 
Registered: Jan 2010
Posts: 6

Original Poster
Rep: Reputation: 0
No, It plugs into PCI. But there is no lspci listed in /sbin either. Just lspcmcia.


-David.
 
Old 07-20-2010, 10:06 PM   #4
jefro
Guru
 
Registered: Mar 2008
Posts: 12,093

Rep: Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521Reputation: 1521
Ubuntu ought to have lspci. Try find -name command.


Lspci would be a better start.

I am guessing it is the MX440 card with tv out or do you have a separate card?


http://www.allquests.com/question/31...40-tv-out.html has some info
 
Old 07-20-2010, 10:27 PM   #5
d-mcclean
LQ Newbie
 
Registered: Jan 2010
Posts: 6

Original Poster
Rep: Reputation: 0
Arrow

Ok say lspci did work, here's the output;

And it is a seperate card - bottom PCI slot.

xx@xx:~$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:0e.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
00:0f.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
00:10.0 Multimedia video controller: Sony Corporation Device 8087 (rev 01)
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:13.0 FireWire (IEEE 1394): NEC Corporation uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr (rev 01)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
xx@xx:~$
 
Old 07-20-2010, 10:30 PM   #6
d-mcclean
LQ Newbie
 
Registered: Jan 2010
Posts: 6

Original Poster
Rep: Reputation: 0
Let me clarify; separate from the Motherboard, not the sound card. It's got S-video and 1/8" audio in & out as well as an NTSC tuner out.
 
  


Reply

Tags
sony, vaio


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux compatibility with Sony Vaio VGN-N350N? tferero Linux - Hardware 22 07-29-2010 07:06 PM
Sony VAIO VGNN325EW (in)compatibility issues. cipicip Linux - Laptop and Netbook 8 10-18-2008 01:20 AM
resolution problem on vaio PCV-RX550 in blag unknowndevice Linux - Newbie 2 11-21-2007 11:01 AM
Having trouble installing SUSE 9.1 PRO on a Sony Vaio PCV-RS710GX Desktop furfurdemon666 Suse/Novell 6 12-12-2004 08:10 AM
help me install linux on sony sony vaio pcg-r505gl heina Linux - Newbie 4 10-10-2004 11:36 PM


All times are GMT -5. The time now is 07:44 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration